lkml.org 
[lkml]   [2017]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 2/2] ARM: dts: TS-4600: add basic device tree
Date
These device trees add support for the TS-4600 by Technologic Systems.

More details here:
http://wiki.embeddedarm.com/wiki/TS-4600

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
---
Changes v7 -> v8:
- rebase on master
- merge the rev A and B into one device tree based on the last rev B
because only the memory size change between the two rev currently
(suggested by Shawn Guo)

Changes v6 -> v7:
- rebase on master
- remove unneeded pinctrl-name (suggested by Shawn Guo)
- add reg to the node en-sd-pwr (suggested by Shawn Guo)
- use define for gpio polarity (suggested by Shawn Guo)
- remove the fake bus container for regulator (suggested by Shawn Guo)

Changes v5 -> v6:
- rebase on master
- split the previous patch series into series by subsystem

Changes v4 -> v5:
- fix missing signed off

Changes v3 -> v4:
- rebase on master

Changes v2 -> v3:
- rebase on master

Changes v1 -> v2:
- rebase on master
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx28-ts4600.dts | 79 ++++++++++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+)
create mode 100644 arch/arm/boot/dts/imx28-ts4600.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..678373d299d8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -558,6 +558,7 @@ dtb-$(CONFIG_ARCH_MXS) += \
imx28-m28cu3.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
+ imx28-ts4600.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_NOMADIK) += \
ste-nomadik-s8815.dtb \
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
new file mode 100644
index 000000000000..f37d81381620
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2016 Savoir-Faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+
+ model = "Technologic Systems i.MX28 TS-4600";
+ compatible = "technologic,imx28-ts4600", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x10000000>; /* 256MB */
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a
+ &mmc0_sck_cfg
+ &en_sd_pwr>;
+ broken-cd = <1>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_vddio_sd0>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+
+ en_sd_pwr: en-sd-pwr@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM3__GPIO_3_28
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ };
+ };
+
+ apbx@80040000 {
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pins_a>;
+ status = "okay";
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ };
+
+};
--
2.15.0
\
 
 \ /
  Last update: 2017-11-23 22:05    [W:0.086 / U:1.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site