[lkml]   [2017]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 0/5] Memory hotplug support for arm64 - complete patchset v2
On Thu 23 Nov 2017, 17:02, Michal Hocko wrote:

Hi Michal,

> I will try to have a look but I do not expect to understand any of arm64
> specific changes so I will focus on the generic code but it would help a
> _lot_ if the cover letter provided some overview of what has been done
> from a higher level POV. What are the arch pieces and what is the
> generic code missing. A quick glance over patches suggests that
> changelogs for specific patches are modest as well. Could you give us
> more information please? Reviewing hundreds lines of code without
> context is a pain.

sorry for the lack of details. I will try to provide a better
overview in the following. Please, feel free to ask for more details
where needed.

Overall, the goal of the patchset is to implement arch_memory_add and
arch_memory_remove for arm64, to support the generic memory_hotplug

Hot add
Not so many surprises here. We implement the arch specific
arch_add_memory, which builds the kernel page tables via hotplug_paging()
and then calls arch specific add_pages(). We need the arch specific
add_pages() to implement a trick that makes the satus of pages being
added accepted by the asumptions made in the generic __add_pages. (See
code comments).

Hot remove
The code is basically a port of x86_64 hot remove, with several relevant
changes that I am highlithing below.

* Architecture specific code:
- We implement arch_remove_memory() which takes care of i) calling
the generic __remove_pages and ii) tearing down kernel page tables

- We implement the arch specific vmemmap_free(), which is called by the
generic code to free vmemmap for memory being removed. vmemmap_free(),
in its turn, reuses the code of remove_pagetable() to do its job.

- remove_pagetable() (called by the two functions above), removes kernel
page tables and, in the case of vmemmap, also removes the actual
vmemmap pages. The function never splits P[UM]D mapped page
table entries, and fails in case such a split is requested.
To implement this behavior, we do a two passes call of
remove_pagetable() in arch_remove_memory(): the first pass does not
alter any of the pagetable contents, but only checks whether some
P[UM]D split would occur; in the case the first pass succeeds, the
second pass does the actual removal job.
Actually, the case where a P[UM]D would be split should be extremely
rare - so denying the removal should not be a big deal:
in fact, hot-add and hot-remove add memory at the granularity of
SECTION_SIZE_BITS, which is hardcoded to 30 for arm64 at the moment,
and PMDs and PUDs map 2MB and 1GB worth of 4K pages, respectively.
In order for a split to occur, someone should first decrease
SECTION_SIZE_BITS and then ask to remove some p[um]d sub area that
was mapped at boot to the full p[um]d.

* Generic code
- [SYSFS and x86 ACPI changes]. In x86, hot remove is triggered by ACPI,
which performs memory offlining and removal in one atomic step. To
enable memory removal in the absence of ACPI, we add a sysfs `remove`
handle (/sys/devices/system/memory/remove), symmetrically to the
existing memory probe device (existing since the beginning of time
with commit 3947be1969a9 ("memory hotplug: sysfs and add/remove
functions")). To hot-remove a section, one would first offline it
(echo offline > /sys/devices/system/memory/memoryXX/state) and then
call remove on this new remove handle, passing the phy address of the
section being removed.
Now, the x86 code assumes that offline and remove are done in one
single atomic step (ACPI- Commit 242831eb15a0 ("Memory hotplug / ACPI:
Simplify memory removal")). In this spirit, the generic code also
assumed that when someone called memory_hotplug.c:remove_memory, then
that memory would have been already offlined. If that was not the case,
it would raise a BUG().
In our case, offlining and removal are done in separate steps,
so we remove this assumptions and fail the removal if the memory
was not previously offlined. We also consider the possibility that
arch_remove_memory itself might fail. As explained above, in some rare
cases, it actually might in our arm64 implementation.
While functional to our implementation, I believe that the assumption
of offlining and removal in one atomic step is not obvious for all
the architectures in general.
- [Memblock changes]. In x86 hot-remove implementation - commit
ae9aae9eda2d ("memory-hotplug: common APIs to support page tables
hot-remove") -, when freeing
vmemmap, if a vmemmap page is only partially cleared and some of its
content is still used, then the vmemap page is obviously not freed.
Instead, the partially unused content of that paged is memset to the
seemingly totally arbitrary 0xFD constant. When all the page content
is found to be set to 0xFD, then the page is freed.
After some good feedback received on the v1 of this patchset, we
decided to get rid of this 0xFD trick for our arm64 port. Instead, we
added a memblock flag, that we use to mark partially unused vmemmap
areas (like 0xFD was doing before). We then check memblock rather than
the content of the page to decide whether we can free it or not.

I hope this is a better cover letter.

Best regards,

> > Changes v1->v2:
> > - swapper pgtable updated in place on hot add, avoiding unnecessary copy
> > - stop_machine used to updated swapper on hot add, avoiding races
> > - introduced check on offlining state before hot remove
> > - new memblock flag used to mark partially unused vmemmap pages, avoiding
> > the nasty 0xFD hack used in the prev rev (and in x86 hot remove code)
> > - proper cleaning sequence for p[um]ds,ptes and related TLB management
> > - Removed macros that changed hot remove behavior based on number
> > of pgtable levels. Now this is hidden in the pgtable traversal macros.
> > - Check on the corner case where P[UM]Ds would have to be split during
> > hot remove: now this is forbidden.
> > - Minor fixes and refactoring.
> >
> > Andrea Reale (4):
> > mm: memory_hotplug: Remove assumption on memory state before hotremove
> > mm: memory_hotplug: memblock to track partially removed vmemmap mem
> > mm: memory_hotplug: Add memory hotremove probe device
> > mm: memory-hotplug: Add memory hot remove support for arm64
> >
> > Maciej Bielski (1):
> > mm: memory_hotplug: Memory hotplug (add) support for arm64
> >
> > arch/arm64/Kconfig | 15 +
> > arch/arm64/configs/defconfig | 2 +
> > arch/arm64/include/asm/mmu.h | 7 +
> > arch/arm64/mm/init.c | 116 ++++++++
> > arch/arm64/mm/mmu.c | 609 ++++++++++++++++++++++++++++++++++++++++-
> > drivers/acpi/acpi_memhotplug.c | 2 +-
> > drivers/base/memory.c | 34 ++-
> > include/linux/memblock.h | 12 +
> > include/linux/memory_hotplug.h | 9 +-
> > mm/memblock.c | 32 +++
> > mm/memory_hotplug.c | 13 +-
> > 11 files changed, 835 insertions(+), 16 deletions(-)
> >
> > --
> > 2.7.4
> >
> --
> Michal Hocko
> SUSE Labs

 \ /
  Last update: 2017-11-23 18:34    [W:0.254 / U:1.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site