lkml.org 
[lkml]   [2017]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [tegra186]: emmc resume failing after booting from snapshot image
Hi,

I am trying to bring up suspend-to-disk (snapshot boot) on jetson-tx2
board (nvidia tegra186).
Suspend is working fine, but during boot with snapshot image, emmc
resume is failing.
Kernel version: 4.4
Repo: https://nv-tegra.nvidia.com/gitweb/?p=linux-4.4.git;a=summary
repo: tegra-l4t-r27.1


It returns with:
mmc0: error -110 during resume (card was removed?)

Please see the complete logs below.

I tried to add some prints in mmc driver to check the cause.
It seems that mmc is not responding during resume.
[ 137.125314] mmc_sleep: ERROR: mmc_wait_for_cmd, ret: -110
When I check more, I found that CMD5 (Sleep/Awake) is failing to response.
It is not able to wakeup the mmc from sleep.

What could be cause of this problem?
Any pointers or suggestions about this issue will be really helpful....

When I see the linux kernel mainline kernel-4.14 (latest), I could see
that there are some patches in drivers/mmc/core/* which are missing in
jetson tx2 kernel version-4.4.
Do you think any of the latest patches may help to solve this issue?
If yes, can you point to some of relevant once?


Please help.


Thanks,
Pintu

LOGS:
-----------------------------------------------------------
## Booting ...
[ 117.079061] sdhci-tegra 3400000.sdhci: Tuning already done,
restoring the best tap value : 112
[ 117.081179] xhci-tegra 3530000.xhci: exiting ELPG
[ 117.081798] xhci-tegra 3530000.xhci: Firmware timestamp: 2016-09-01
11:32:41 UTC, Version: 55.05 release
[ 117.085202] xhci-tegra 3530000.xhci: exiting ELPG done
[ 117.085204] xhci-tegra 3530000.xhci: entering ELPG
[ 117.087770] xhci-tegra 3530000.xhci: entering ELPG done
[ 117.087775] Wake76 for irq=199
[ 117.087777] Wake77 for irq=199
[ 117.087778] Wake78 for irq=199
[ 117.087779] Wake79 for irq=199
[ 117.087780] Wake80 for irq=199
[ 117.087781] Wake81 for irq=199
[ 117.087782] Wake82 for irq=199
[ 117.087784] Enabling wake76
[ 117.087785] Enabling wake77
[ 117.087786] Enabling wake78
[ 117.087787] Enabling wake79
[ 117.087788] Enabling wake80
[ 117.087789] Enabling wake81
[ 117.087790] Enabling wake82
[ 117.087891] tegra186-cam-rtcpu b000000.rtcpu: sce gets halted
[ 117.090012] Wake24 for irq=241
[ 117.090015] Enabling wake24
[ 117.090598] nct1008_nct72 7-004c: success in disabling tmp451 VDD rail
[ 117.090654] gpio tegra-gpio-aon wake29 for gpio=56(FF:0)
[ 117.090655] Enabling wake29
[ 117.090774] gpio tegra-gpio wake53 for gpio=159(X:5)
[ 117.090775] Enabling wake53
[ 117.111219] tegradc 15210000.nvdisplay: suspend
[ 117.111422] Wake73 for irq=42
[ 117.111424] Enabling wake73
[ 117.111597] bcm54xx_low_power_mode(): put phy in iddq-lp mode
[ 117.113533] gpio tegra-gpio wake71 for gpio=125(P:6)
[ 117.113535] Enabling wake71
[ 117.113632] PM: suspend of devices complete after 34.680 msecs
[ 117.114829] host1x 13e10000.host1x: suspended
[ 117.114898] PM: late suspend of devices complete after 1.262 msecs
[ 117.133746] PM: noirq suspend of devices complete after 18.841 msecs
[ 117.133971] Disabling non-boot CPUs ...
[ 117.134249] CPU3: shutdown
[ 117.148582] psci: Retrying again to check for CPU kill
[ 117.148586] psci: CPU3 killed.
[ 117.149097] CPU4: shutdown
[ 117.164584] psci: Retrying again to check for CPU kill
[ 117.164589] psci: CPU4 killed.
[ 117.165041] CPU5: shutdown
[ 117.180572] psci: Retrying again to check for CPU kill
[ 117.180576] psci: CPU5 killed.
[ 117.180834] Entered SC7
[ 117.180834] Wake[31-0] level=0x40000000
[ 117.180834] Wake[63-32] level=0x0
[ 117.180834] Wake[95-64] level=0x7f2a0
[ 117.180834] Wake[31-0] enable=0x21000000
[ 117.180834] Wake[63-32] enable=0x200000
[ 117.180834] Wake[95-64] enable=0x7f280
[ 117.180834] Wake[31-0] route=0x21000000
[ 117.180834] Wake[63-32] route=0x200000
[ 117.180834] Wake[95-64] route=0x7f280
----
[ 117.180834] Wake[32:0] status=0x0
[ 117.180834] Wake[64:32] status=0x0
[ 117.180834] Wake[96:64] status=0x0
[ 117.180834] Exited SC7
[ 117.180834] bpmp: waiting for handshake
[ 117.180834] bpmp: synchronizing channels
[ 117.180834] bpmp: channels synchronized
[ 117.180869] Enabling non-boot CPUs ...
[ 117.181067] CPU3: Booted secondary processor [411fd073]
[ 117.181198] CPU3 is up
[ 117.181353] CPU4: Booted secondary processor [411fd073]
[ 117.181455] CPU4 is up
[ 117.181609] CPU5: Booted secondary processor [411fd073]
[ 117.181721] CPU5 is up
[ 117.182740] xhci-tegra 3530000.xhci: exiting ELPG
[ 117.183221] xhci-tegra 3530000.xhci: Firmware timestamp: 2016-09-01
11:32:41 UTC, Version: 55.05 release
[ 117.381630] xhci-tegra 3530000.xhci: XHCI Controller not ready.
Falcon state: 0x10
[ 117.381633] xhci-tegra 3530000.xhci: exiting ELPG failed
[ 117.381643] dpm_run_callback(): tegra_xhci_resume_noirq+0x0/0x48 returns -14
[ 117.381653] PM: Device 3530000.xhci failed to resume noirq: error -14
[ 117.381724] PM: noirq resume of devices complete after 199.999 msecs
[ 117.383100] PM: early resume of devices complete after 1.236 msecs
[ 117.390964] gpio tegra-gpio wake71 for gpio=125(P:6)
[ 117.390966] Disabling wake71
[ 117.392317] pad_id 26: PMC_IMPL_E_33V_PWR_0 = [0x79]
[ 117.392317] sdhci-tegra 3400000.sdhci: Tuning already done,
restoring the best tap value : 112
[ 117.392380] sdhci-tegra 3400000.sdhci: Tuning already done,
restoring the best tap value : 112
[ 117.393492] skipping ...
[ 117.393495] skipping ...
[ 117.393496] skipping ...
[ 117.393498] skipping ...
[ 117.393499] skipping ...
[ 117.393510] skipping ...
[ 117.393511] skipping ...
[ 117.393512] skipping ...
[ 117.461448] gpio tegra-gpio wake18 for gpio=101(M:3)
[ 117.461611] Wake73 for irq=42
[ 117.461613] Disabling wake73
[ 117.461636] tegradc 15210000.nvdisplay: resume
[ 117.461640] PD DISP0 index2 UP
[ 117.462067] PD DISP1 index3 UP
[ 117.462156] PD DISP2 index4 UP
[ 117.468176] gk20a 17000000.gp10b: gk20a_init_fifo_setup_hw: bar1
broken @ gk20a: CPU wrote 0x33, GPU read 0xbad0ac05
[ 117.468179] gk20a 17000000.gp10b: gk20a_pm_finalize_poweron: failed
to init gk20a fifo
[ 117.481847] dpm_run_callback(): platform_pm_resume+0x0/0x58 returns -22
[ 117.481850] PM: Device 17000000.gp10b failed to resume: error -22
[ 117.484872] gpio tegra-gpio wake53 for gpio=159(X:5)
[ 117.484874] Disabling wake53
[ 117.486434] extcon-gpio-states external-connection:extcon@1: Cable state 0
[ 117.486544] pwm_fan_driver pwm-fan: Enabled vdd-fan
[ 117.486646] gpio tegra-gpio-aon wake29 for gpio=56(FF:0)
[ 117.486647] Disabling wake29
[ 117.487977] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail
[ 117.487982] nct1008_nct72 7-004c: nct1008_read_reg: err -16
[ 117.487985] nct1008_nct72 7-004c: nct1008_write_reg: err -16
[ 117.487988] nct1008_nct72 7-004c:
[ 117.487988] exit nct1008_configure_sensor, err=-16
[ 117.487990] nct1008_nct72 7-004c: nct1008_write_reg: err -16
[ 117.487993] nct1008_nct72 7-004c: nct1008_enable, line=1174, i2c
write error=-16
[ 117.487996] nct1008_nct72 7-004c: Error: nct1008_resume_powerdown, error=-16
[ 117.488004] dpm_run_callback(): nct1008_resume+0x0/0x140 returns -16
[ 117.488006] PM: Device 7-004c failed to resume: error -16
[ 117.540893] Wake24 for irq=241
[ 117.540895] Disabling wake24
[ 117.541684] tegra-xudc-new 3550000.xudc: exiting ELPG
[ 117.542833] tegra-xudc-new 3550000.xudc: exiting ELPG done
[ 117.543777] tegra186-cam-rtcpu b000000.rtcpu: booting sce with Camera RTCPU FW
[ 117.543781] tegra186-cam-rtcpu b000000.rtcpu: sce gets unhalted
[ 117.543825] tegra186-cam-rtcpu b000000.rtcpu: enabling tracing
[ 117.543872] xhci-tegra 3530000.xhci: exiting ELPG
[ 117.544128] xhci-tegra 3530000.xhci: Firmware already loaded, Falcon
state 0x10
[ 118.044718] xhci-tegra 3530000.xhci: exiting ELPG done
[ 118.044733] Wake76 for irq=199
[ 118.044735] Wake77 for irq=199
[ 118.044736] Wake78 for irq=199
[ 118.044737] Wake79 for irq=199
[ 118.044738] Wake80 for irq=199
[ 118.044739] Wake81 for irq=199
[ 118.044740] Wake82 for irq=199
[ 118.044742] Disabling wake76
[ 118.044743] Disabling wake77
[ 118.044744] Disabling wake78
[ 118.044745] Disabling wake79
[ 118.044746] Disabling wake80
[ 118.044747] Disabling wake81
[ 118.044748] Disabling wake82
[ 118.044783] pwm_fan_driver pwm-fan: Disabled vdd-fan
[ 118.044784] _mmc_resume: [PINTU]: Enter
[ 118.044787] _mmc_resume: [PINTU]: mmc_card_in_sleep
[ 118.044821] _mmc_resume: [PINTU]: Done
[ 118.044824] mmc0: error -110 during resume (card was removed?)
[ 118.234270] pad_id 26: PMC_IMPL_E_33V_PWR_0 = [0x79]
[ 118.258208] pad_id 26: PMC_IMPL_E_33V_PWR_0 = [0x69]
[ 118.258208] sdhci-tegra 3400000.sdhci: Tuning already done,
restoring the best tap value : 112
[ 120.496556] tegra-hda 3510000.hda: azx_get_response timeout,
switching to polling mode: last cmd=0x30170500
[ 121.500555] tegra-hda 3510000.hda: azx_get_response timeout,
switching to single_cmd mode: last cmd=0x30170500
[ 121.501139] PM: resume of devices complete after 4118.033 msecs
[ 121.517871] eqos 2490000.ether_qos eth0: Link is Up - 100Mbps/Full -
flow control rx/tx
--
[ 122.335653] Restarting tasks ...
[ 122.339023] tegra-xudc-new 3550000.xudc: entering ELPG
[ 122.345787] xhci-tegra 3530000.xhci: entering ELPG
[ 122.347145] tegra-xudc-new 3550000.xudc: entering ELPG done
[ 122.347558] nct1008_nct72 7-004c: nct1008_read_reg: err -16
[ 122.347561] thermal thermal_zone5: failed to read out thermal zone (-1)
[ 122.347565] nct1008_nct72 7-004c: nct1008_read_reg: err -16
[ 122.347568] thermal thermal_zone6: failed to read out thermal zone (-1)
[ 122.385092] PM: suspend exit 2016-05-06 05:42:04.775600032 UTC
[ 122.386487] xhci-tegra 3530000.xhci: entering ELPG done
[ 124.605296] mmcblk0: error -110 sending status command, retrying
[ 124.613771] mmcblk0: error -110 sending status command, retrying
[ 124.622175] mmcblk0: error -110 sending status command, aborting
[ 124.631538] mmc_reset: [PINTU]: Enter
[ 124.638572] blk_update_request: I/O error, dev mmcblk0, sector 59745989
[ 124.648740] blk_update_request: I/O error, dev mmcblk0, sector 59745990
[ 124.658768] blk_update_request: I/O error, dev mmcblk0, sector 59745991
[ 124.668689] blk_update_request: I/O error, dev mmcblk0, sector 59745992
[ 124.678609] blk_update_request: I/O error, dev mmcblk0, sector 59745993
[ 124.688666] mmcblk0: error -110 sending status command, retrying
[ 124.697840] mmcblk0: error -110 sending status command, retrying
[ 124.706903] mmcblk0: error -110 sending status command, aborting
[ 124.715858] blk_update_request: I/O error, dev mmcblk0, sector 59745994
[ 124.725339] blk_update_request: I/O error, dev mmcblk0, sector 59745995
[ 124.734690] blk_update_request: I/O error, dev mmcblk0, sector 59745996
[ 124.743936] blk_update_request: I/O error, dev mmcblk0, sector 59745997
[ 124.753041] blk_update_request: I/O error, dev mmcblk0, sector 59745998
[ 124.762252] mmcblk0: error -110 sending status command, retrying
[ 124.770656] mmcblk0: error -110 sending status command, retrying
[ 124.778977] mmcblk0: error -110 sending status command, aborting
[ 124.789002] mmcblk0: error -110 sending status command, retrying
[ 124.797177] mmcblk0: error -110 sending status command, retrying
[ 124.805285] mmcblk0: error -110 sending status command, aborting
[ 124.814281] mmcblk0: error -110 sending status command, retrying
[ 124.822247] mmcblk0: error -110 sending status command, retrying
[ 124.830092] mmcblk0: error -110 sending status command, aborting
[ 124.837840] FAT-fs (mmcblk0p17): FAT read failed (blocknr 32)

-----------------------------------------------------------------------------------------------------




On Mon, Nov 20, 2017 at 12:48 PM, Pintu Kumar <pintu.ping@gmail.com> wrote:
> Hi,
>
> I am trying to verify suspend-to-disk on jetson-tx2 board (nvidia tegra186).
> Suspend is working fine, but during resume emmc is failing to resume.
> Kernel version: 4.4
> Repo: https://nv-tegra.nvidia.com/gitweb/?p=linux-4.4.git;a=summary
>
>
> It returns with:
> mmc0: error -110 during resume (card was removed?)
>
> Please see the complete logs below.
>
> I tried to add some prints in mmc driver to check the cause.
> It seems that mmc is not responding during resume.
> [ 137.125314] mmc_sleep: ERROR: mmc_wait_for_cmd, ret: -110
>
> Do you have any pointers to fix/debug this issue?
> When I see the linux kernel mainline kernel-4.14 (latest), I could see
> that there are some patches in drivers/mmc/core/* which are missing in
> jetson tx2 kernel version-4.4.
> Do you think any of the latest patches may help to solve this issue?
> If yes, can you point to some of relevant once?
>
>
> Please help.
>
>
> Thanks,
> Pintu
>
> LOGS:
> -----------------------------------------------------------
> ## Booting ...
> [ 117.079061] sdhci-tegra 3400000.sdhci: Tuning already done,
> restoring the best tap value : 112
> [ 117.081179] xhci-tegra 3530000.xhci: exiting ELPG
> [ 117.081798] xhci-tegra 3530000.xhci: Firmware timestamp: 2016-09-01
> 11:32:41 UTC, Version: 55.05 release
> [ 117.085202] xhci-tegra 3530000.xhci: exiting ELPG done
> [ 117.085204] xhci-tegra 3530000.xhci: entering ELPG
> [ 117.087770] xhci-tegra 3530000.xhci: entering ELPG done
> [ 117.087775] Wake76 for irq=199
> [ 117.087777] Wake77 for irq=199
> [ 117.087778] Wake78 for irq=199
> [ 117.087779] Wake79 for irq=199
> [ 117.087780] Wake80 for irq=199
> [ 117.087781] Wake81 for irq=199
> [ 117.087782] Wake82 for irq=199
> [ 117.087784] Enabling wake76
> [ 117.087785] Enabling wake77
> [ 117.087786] Enabling wake78
> [ 117.087787] Enabling wake79
> [ 117.087788] Enabling wake80
> [ 117.087789] Enabling wake81
> [ 117.087790] Enabling wake82
> [ 117.087891] tegra186-cam-rtcpu b000000.rtcpu: sce gets halted
> [ 117.090012] Wake24 for irq=241
> [ 117.090015] Enabling wake24
> [ 117.090598] nct1008_nct72 7-004c: success in disabling tmp451 VDD rail
> [ 117.090654] gpio tegra-gpio-aon wake29 for gpio=56(FF:0)
> [ 117.090655] Enabling wake29
> [ 117.090774] gpio tegra-gpio wake53 for gpio=159(X:5)
> [ 117.090775] Enabling wake53
> [ 117.111219] tegradc 15210000.nvdisplay: suspend
> [ 117.111422] Wake73 for irq=42
> [ 117.111424] Enabling wake73
> [ 117.111597] bcm54xx_low_power_mode(): put phy in iddq-lp mode
> [ 117.113533] gpio tegra-gpio wake71 for gpio=125(P:6)
> [ 117.113535] Enabling wake71
> [ 117.113632] PM: suspend of devices complete after 34.680 msecs
> [ 117.114829] host1x 13e10000.host1x: suspended
> [ 117.114898] PM: late suspend of devices complete after 1.262 msecs
> [ 117.133746] PM: noirq suspend of devices complete after 18.841 msecs
> [ 117.133971] Disabling non-boot CPUs ...
> [ 117.134249] CPU3: shutdown
> [ 117.148582] psci: Retrying again to check for CPU kill
> [ 117.148586] psci: CPU3 killed.
> [ 117.149097] CPU4: shutdown
> [ 117.164584] psci: Retrying again to check for CPU kill
> [ 117.164589] psci: CPU4 killed.
> [ 117.165041] CPU5: shutdown
> [ 117.180572] psci: Retrying again to check for CPU kill
> [ 117.180576] psci: CPU5 killed.
> [ 117.180834] Entered SC7
> [ 117.180834] Wake[31-0] level=0x40000000
> [ 117.180834] Wake[63-32] level=0x0
> [ 117.180834] Wake[95-64] level=0x7f2a0
> [ 117.180834] Wake[31-0] enable=0x21000000
> [ 117.180834] Wake[63-32] enable=0x200000
> [ 117.180834] Wake[95-64] enable=0x7f280
> [ 117.180834] Wake[31-0] route=0x21000000
> [ 117.180834] Wake[63-32] route=0x200000
> [ 117.180834] Wake[95-64] route=0x7f280
> ----
> [ 117.180834] Wake[32:0] status=0x0
> [ 117.180834] Wake[64:32] status=0x0
> [ 117.180834] Wake[96:64] status=0x0
> [ 117.180834] Exited SC7
> [ 117.180834] bpmp: waiting for handshake
> [ 117.180834] bpmp: synchronizing channels
> [ 117.180834] bpmp: channels synchronized
> [ 117.180869] Enabling non-boot CPUs ...
> [ 117.181067] CPU3: Booted secondary processor [411fd073]
> [ 117.181198] CPU3 is up
> [ 117.181353] CPU4: Booted secondary processor [411fd073]
> [ 117.181455] CPU4 is up
> [ 117.181609] CPU5: Booted secondary processor [411fd073]
> [ 117.181721] CPU5 is up
> [ 117.182740] xhci-tegra 3530000.xhci: exiting ELPG
> [ 117.183221] xhci-tegra 3530000.xhci: Firmware timestamp: 2016-09-01
> 11:32:41 UTC, Version: 55.05 release
> [ 117.381630] xhci-tegra 3530000.xhci: XHCI Controller not ready.
> Falcon state: 0x10
> [ 117.381633] xhci-tegra 3530000.xhci: exiting ELPG failed
> [ 117.381643] dpm_run_callback(): tegra_xhci_resume_noirq+0x0/0x48 returns -14
> [ 117.381653] PM: Device 3530000.xhci failed to resume noirq: error -14
> [ 117.381724] PM: noirq resume of devices complete after 199.999 msecs
> [ 117.383100] PM: early resume of devices complete after 1.236 msecs
> [ 117.390964] gpio tegra-gpio wake71 for gpio=125(P:6)
> [ 117.390966] Disabling wake71
> [ 117.392317] pad_id 26: PMC_IMPL_E_33V_PWR_0 = [0x79]
> [ 117.392317] sdhci-tegra 3400000.sdhci: Tuning already done,
> restoring the best tap value : 112
> [ 117.392380] sdhci-tegra 3400000.sdhci: Tuning already done,
> restoring the best tap value : 112
> [ 117.393492] skipping ...
> [ 117.393495] skipping ...
> [ 117.393496] skipping ...
> [ 117.393498] skipping ...
> [ 117.393499] skipping ...
> [ 117.393510] skipping ...
> [ 117.393511] skipping ...
> [ 117.393512] skipping ...
> [ 117.461448] gpio tegra-gpio wake18 for gpio=101(M:3)
> [ 117.461611] Wake73 for irq=42
> [ 117.461613] Disabling wake73
> [ 117.461636] tegradc 15210000.nvdisplay: resume
> [ 117.461640] PD DISP0 index2 UP
> [ 117.462067] PD DISP1 index3 UP
> [ 117.462156] PD DISP2 index4 UP
> [ 117.468176] gk20a 17000000.gp10b: gk20a_init_fifo_setup_hw: bar1
> broken @ gk20a: CPU wrote 0x33, GPU read 0xbad0ac05
> [ 117.468179] gk20a 17000000.gp10b: gk20a_pm_finalize_poweron: failed
> to init gk20a fifo
> [ 117.481847] dpm_run_callback(): platform_pm_resume+0x0/0x58 returns -22
> [ 117.481850] PM: Device 17000000.gp10b failed to resume: error -22
> [ 117.484872] gpio tegra-gpio wake53 for gpio=159(X:5)
> [ 117.484874] Disabling wake53
> [ 117.486434] extcon-gpio-states external-connection:extcon@1: Cable state 0
> [ 117.486544] pwm_fan_driver pwm-fan: Enabled vdd-fan
> [ 117.486646] gpio tegra-gpio-aon wake29 for gpio=56(FF:0)
> [ 117.486647] Disabling wake29
> [ 117.487977] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail
> [ 117.487982] nct1008_nct72 7-004c: nct1008_read_reg: err -16
> [ 117.487985] nct1008_nct72 7-004c: nct1008_write_reg: err -16
> [ 117.487988] nct1008_nct72 7-004c:
> [ 117.487988] exit nct1008_configure_sensor, err=-16
> [ 117.487990] nct1008_nct72 7-004c: nct1008_write_reg: err -16
> [ 117.487993] nct1008_nct72 7-004c: nct1008_enable, line=1174, i2c
> write error=-16
> [ 117.487996] nct1008_nct72 7-004c: Error: nct1008_resume_powerdown, error=-16
> [ 117.488004] dpm_run_callback(): nct1008_resume+0x0/0x140 returns -16
> [ 117.488006] PM: Device 7-004c failed to resume: error -16
> [ 117.540893] Wake24 for irq=241
> [ 117.540895] Disabling wake24
> [ 117.541684] tegra-xudc-new 3550000.xudc: exiting ELPG
> [ 117.542833] tegra-xudc-new 3550000.xudc: exiting ELPG done
> [ 117.543777] tegra186-cam-rtcpu b000000.rtcpu: booting sce with Camera RTCPU FW
> [ 117.543781] tegra186-cam-rtcpu b000000.rtcpu: sce gets unhalted
> [ 117.543825] tegra186-cam-rtcpu b000000.rtcpu: enabling tracing
> [ 117.543872] xhci-tegra 3530000.xhci: exiting ELPG
> [ 117.544128] xhci-tegra 3530000.xhci: Firmware already loaded, Falcon
> state 0x10
> [ 118.044718] xhci-tegra 3530000.xhci: exiting ELPG done
> [ 118.044733] Wake76 for irq=199
> [ 118.044735] Wake77 for irq=199
> [ 118.044736] Wake78 for irq=199
> [ 118.044737] Wake79 for irq=199
> [ 118.044738] Wake80 for irq=199
> [ 118.044739] Wake81 for irq=199
> [ 118.044740] Wake82 for irq=199
> [ 118.044742] Disabling wake76
> [ 118.044743] Disabling wake77
> [ 118.044744] Disabling wake78
> [ 118.044745] Disabling wake79
> [ 118.044746] Disabling wake80
> [ 118.044747] Disabling wake81
> [ 118.044748] Disabling wake82
> [ 118.044783] pwm_fan_driver pwm-fan: Disabled vdd-fan
> [ 118.044784] _mmc_resume: [PINTU]: Enter
> [ 118.044787] _mmc_resume: [PINTU]: mmc_card_in_sleep
> [ 118.044821] _mmc_resume: [PINTU]: Done
> [ 118.044824] mmc0: error -110 during resume (card was removed?)
> [ 118.234270] pad_id 26: PMC_IMPL_E_33V_PWR_0 = [0x79]
> [ 118.258208] pad_id 26: PMC_IMPL_E_33V_PWR_0 = [0x69]
> [ 118.258208] sdhci-tegra 3400000.sdhci: Tuning already done,
> restoring the best tap value : 112
> [ 120.496556] tegra-hda 3510000.hda: azx_get_response timeout,
> switching to polling mode: last cmd=0x30170500
> [ 121.500555] tegra-hda 3510000.hda: azx_get_response timeout,
> switching to single_cmd mode: last cmd=0x30170500
> [ 121.501139] PM: resume of devices complete after 4118.033 msecs
> [ 121.517871] eqos 2490000.ether_qos eth0: Link is Up - 100Mbps/Full -
> flow control rx/tx
> --
> [ 122.335653] Restarting tasks ...
> [ 122.339023] tegra-xudc-new 3550000.xudc: entering ELPG
> [ 122.345787] xhci-tegra 3530000.xhci: entering ELPG
> [ 122.347145] tegra-xudc-new 3550000.xudc: entering ELPG done
> [ 122.347558] nct1008_nct72 7-004c: nct1008_read_reg: err -16
> [ 122.347561] thermal thermal_zone5: failed to read out thermal zone (-1)
> [ 122.347565] nct1008_nct72 7-004c: nct1008_read_reg: err -16
> [ 122.347568] thermal thermal_zone6: failed to read out thermal zone (-1)
> [ 122.385092] PM: suspend exit 2016-05-06 05:42:04.775600032 UTC
> [ 122.386487] xhci-tegra 3530000.xhci: entering ELPG done
> [ 124.605296] mmcblk0: error -110 sending status command, retrying
> [ 124.613771] mmcblk0: error -110 sending status command, retrying
> [ 124.622175] mmcblk0: error -110 sending status command, aborting
> [ 124.631538] mmc_reset: [PINTU]: Enter
> [ 124.638572] blk_update_request: I/O error, dev mmcblk0, sector 59745989
> [ 124.648740] blk_update_request: I/O error, dev mmcblk0, sector 59745990
> [ 124.658768] blk_update_request: I/O error, dev mmcblk0, sector 59745991
> [ 124.668689] blk_update_request: I/O error, dev mmcblk0, sector 59745992
> [ 124.678609] blk_update_request: I/O error, dev mmcblk0, sector 59745993
> [ 124.688666] mmcblk0: error -110 sending status command, retrying
> [ 124.697840] mmcblk0: error -110 sending status command, retrying
> [ 124.706903] mmcblk0: error -110 sending status command, aborting
> [ 124.715858] blk_update_request: I/O error, dev mmcblk0, sector 59745994
> [ 124.725339] blk_update_request: I/O error, dev mmcblk0, sector 59745995
> [ 124.734690] blk_update_request: I/O error, dev mmcblk0, sector 59745996
> [ 124.743936] blk_update_request: I/O error, dev mmcblk0, sector 59745997
> [ 124.753041] blk_update_request: I/O error, dev mmcblk0, sector 59745998
> [ 124.762252] mmcblk0: error -110 sending status command, retrying
> [ 124.770656] mmcblk0: error -110 sending status command, retrying
> [ 124.778977] mmcblk0: error -110 sending status command, aborting
> [ 124.789002] mmcblk0: error -110 sending status command, retrying
> [ 124.797177] mmcblk0: error -110 sending status command, retrying
> [ 124.805285] mmcblk0: error -110 sending status command, aborting
> [ 124.814281] mmcblk0: error -110 sending status command, retrying
> [ 124.822247] mmcblk0: error -110 sending status command, retrying
> [ 124.830092] mmcblk0: error -110 sending status command, aborting
> [ 124.837840] FAT-fs (mmcblk0p17): FAT read failed (blocknr 32)

\
 
 \ /
  Last update: 2017-11-22 07:41    [W:0.113 / U:2.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site