lkml.org 
[lkml]   [2017]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] media: V3s: Add support for Allwinner CSI.
Hi,

On Wed, Nov 22, 2017 at 09:33:06AM +0800, Yong wrote:
> > On Thu, Jul 27, 2017 at 01:01:35PM +0800, Yong Deng wrote:
> > > Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
> > > and CSI1 is used for parallel interface. This is not documented in
> > > datasheet but by testing and guess.
> > >
> > > This patch implement a v4l2 framework driver for it.
> > >
> > > Currently, the driver only support the parallel interface. MIPI-CSI2,
> > > ISP's support are not included in this patch.
> > >
> > > Signed-off-by: Yong Deng <yong.deng@magewell.com>
> >
> > Thanks again for this driver.
> >
> > It seems like at least this iteration is behaving in a weird way with
> > DMA transfers for at least YU12 and NV12 (and I would assume YV12).
> >
> > Starting a transfer of multiple frames in either of these formats,
> > using either ffmpeg (ffmpeg -f v4l2 -video_size 640x480 -framerate 30
> > -i /dev/video0 output.mkv) or yavta (yavta -c80 -p -F --skip 0 -f NV12
> > -s 640x480 $(media-c tl -e 'sun6i-csi')) will end up in a panic.
> >
> > The panic seems to be generated with random data going into parts of
> > the kernel memory, the pattern being in my case something like
> > 0x8287868a which is very odd (always around 0x88)
> >
> > It turns out that when you cover the sensor, the values change to
> > around 0x28, so it really seems like it's pixels that have been copied
> > there.
> >
> > I've looked quickly at the DMA setup, and it seems reasonable to
> > me. Do you have the same issue on your side? Have you been able to
> > test those formats using your hardware?
>
> I had tested the following formats with BT1120 input:
> V4L2_PIX_FMT_NV12 -> NV12
> V4L2_PIX_FMT_NV21 -> NV21
> V4L2_PIX_FMT_NV16 -> NV16
> V4L2_PIX_FMT_NV61 -> NV61
> V4L2_PIX_FMT_YUV420 -> YU12
> V4L2_PIX_FMT_YVU420 -> YV12
> V4L2_PIX_FMT_YUV422P -> 422P
> And they all work fine.

Ok, that's good to know.

> > Given that they all are planar formats and YUYV and the likes work
> > just fine, maybe we can leave them aside for now?
>
> V4L2_PIX_FMT_YUV422P and V4L2_PIX_FMT_YUYV is OK, and V4L2_PIX_FMT_NV12
> is bad? It's really weird.
>
> What's your input bus code format, type and width?

The sensor is an ov5640, so the MBUS code for the bus is
MEDIA_BUS_FMT_YUYV8_2X8.

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-11-22 10:47    [W:0.087 / U:8.548 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site