lkml.org 
[lkml]   [2017]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V6] clk: qcom: Add spmi_pmic clock divider support
From
Date


On 11/18/2017 1:52 AM, Rob Herring wrote:
> On Fri, Nov 17, 2017 at 03:18:47PM +0530, Tirupathi Reddy wrote:
>> Clkdiv module provides a clock output on the PMIC with CXO as
>> the source. This clock can be routed through PMIC GPIOs. Add
>> a device driver to configure this clkdiv module.
>>
>> Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
>> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> Normally your S-o-B would be last.
Addressed in next patch version [7]
>
>> ---
>> .../bindings/clock/clk-spmi-pmic-div.txt | 59 ++++
> Please split bindings to a separate patch.
Addressed in next patch version [7]
>
> Otherwise,
>
> Acked-by: Rob Herring <robh@kernel.org>
>
>> drivers/clk/qcom/Kconfig | 9 +
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/clk-spmi-pmic-div.c | 308 +++++++++++++++++++++
>> 4 files changed, 377 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/clock/clk-spmi-pmic-div.txt
>> create mode 100644 drivers/clk/qcom/clk-spmi-pmic-div.c

\
 
 \ /
  Last update: 2017-11-21 10:13    [W:0.051 / U:8.916 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site