lkml.org 
[lkml]   [2017]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V7 1/2] clk: qcom: Add spmi_pmic clock divider support
Date
Clkdiv module provides a clock output on the PMIC with CXO as
the source. This clock can be routed through PMIC GPIOs. Add
a device driver to configure this clkdiv module.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 9 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-spmi-pmic-div.c | 302 +++++++++++++++++++++++++++++++++++
3 files changed, 312 insertions(+)
create mode 100644 drivers/clk/qcom/clk-spmi-pmic-div.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 9f6c278..20b5d6f 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -196,3 +196,12 @@ config MSM_MMCC_8996
Support for the multimedia clock controller on msm8996 devices.
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
+
+config SPMI_PMIC_CLKDIV
+ tristate "SPMI PMIC clkdiv Support"
+ depends on (COMMON_CLK_QCOM && SPMI) || COMPILE_TEST
+ help
+ This driver supports the clkdiv functionality on the Qualcomm
+ Technologies, Inc. SPMI PMIC. It configures the frequency of
+ clkdiv outputs of the PMIC. These clocks are typically wired
+ through alternate functions on GPIO pins.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 26410d3..602af38 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -34,3 +34,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
diff --git a/drivers/clk/qcom/clk-spmi-pmic-div.c b/drivers/clk/qcom/clk-spmi-pmic-div.c
new file mode 100644
index 0000000..8672ab8
--- /dev/null
+++ b/drivers/clk/qcom/clk-spmi-pmic-div.c
@@ -0,0 +1,302 @@
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define REG_DIV_CTL1 0x43
+#define DIV_CTL1_DIV_FACTOR_MASK GENMASK(2, 0)
+
+#define REG_EN_CTL 0x46
+#define REG_EN_MASK BIT(7)
+
+struct clkdiv {
+ struct regmap *regmap;
+ u16 base;
+ spinlock_t lock;
+
+ struct clk_hw hw;
+ unsigned int cxo_period_ns;
+};
+
+static inline struct clkdiv *to_clkdiv(struct clk_hw *hw)
+{
+ return container_of(hw, struct clkdiv, hw);
+}
+
+static inline unsigned int div_factor_to_div(unsigned int div_factor)
+{
+ if (!div_factor)
+ div_factor = 1;
+
+ return 1 << (div_factor - 1);
+}
+
+static inline unsigned int div_to_div_factor(unsigned int div)
+{
+ return min(ilog2(div) + 1, 7);
+}
+
+static bool is_spmi_pmic_clkdiv_enabled(struct clkdiv *clkdiv)
+{
+ unsigned int val = 0;
+
+ regmap_read(clkdiv->regmap, clkdiv->base + REG_EN_CTL, &val);
+
+ return val & REG_EN_MASK;
+}
+
+static int
+__spmi_pmic_clkdiv_set_enable_state(struct clkdiv *clkdiv, bool enable,
+ unsigned int div_factor)
+{
+ int ret;
+ unsigned int ns = clkdiv->cxo_period_ns;
+ unsigned int div = div_factor_to_div(div_factor);
+
+ ret = regmap_update_bits(clkdiv->regmap, clkdiv->base + REG_EN_CTL,
+ REG_EN_MASK, enable ? REG_EN_MASK : 0);
+ if (ret)
+ return ret;
+
+ if (enable)
+ ndelay((2 + 3 * div) * ns);
+ else
+ ndelay(3 * div * ns);
+
+ return 0;
+}
+
+static int spmi_pmic_clkdiv_set_enable_state(struct clkdiv *clkdiv, bool enable)
+{
+ unsigned int div_factor;
+
+ regmap_read(clkdiv->regmap, clkdiv->base + REG_DIV_CTL1, &div_factor);
+ div_factor &= DIV_CTL1_DIV_FACTOR_MASK;
+
+ return __spmi_pmic_clkdiv_set_enable_state(clkdiv, enable, div_factor);
+}
+
+static int clk_spmi_pmic_div_enable(struct clk_hw *hw)
+{
+ struct clkdiv *clkdiv = to_clkdiv(hw);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&clkdiv->lock, flags);
+ ret = spmi_pmic_clkdiv_set_enable_state(clkdiv, true);
+ spin_unlock_irqrestore(&clkdiv->lock, flags);
+
+ return ret;
+}
+
+static void clk_spmi_pmic_div_disable(struct clk_hw *hw)
+{
+ struct clkdiv *clkdiv = to_clkdiv(hw);
+ unsigned long flags;
+
+ spin_lock_irqsave(&clkdiv->lock, flags);
+ spmi_pmic_clkdiv_set_enable_state(clkdiv, false);
+ spin_unlock_irqrestore(&clkdiv->lock, flags);
+}
+
+static long clk_spmi_pmic_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned int div, div_factor;
+
+ div = DIV_ROUND_UP(*parent_rate, rate);
+ div_factor = div_to_div_factor(div);
+ div = div_factor_to_div(div_factor);
+
+ return *parent_rate / div;
+}
+
+static unsigned long
+clk_spmi_pmic_div_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clkdiv *clkdiv = to_clkdiv(hw);
+ unsigned int div_factor;
+
+ regmap_read(clkdiv->regmap, clkdiv->base + REG_DIV_CTL1, &div_factor);
+ div_factor &= DIV_CTL1_DIV_FACTOR_MASK;
+
+ return parent_rate / div_factor_to_div(div_factor);
+}
+
+static int clk_spmi_pmic_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clkdiv *clkdiv = to_clkdiv(hw);
+ unsigned int div_factor = div_to_div_factor(parent_rate / rate);
+ unsigned long flags;
+ bool enabled;
+ int ret;
+
+ spin_lock_irqsave(&clkdiv->lock, flags);
+ enabled = is_spmi_pmic_clkdiv_enabled(clkdiv);
+ if (enabled) {
+ ret = spmi_pmic_clkdiv_set_enable_state(clkdiv, false);
+ if (ret)
+ goto unlock;
+ }
+
+ ret = regmap_update_bits(clkdiv->regmap, clkdiv->base + REG_DIV_CTL1,
+ DIV_CTL1_DIV_FACTOR_MASK, div_factor);
+ if (ret)
+ goto unlock;
+
+ if (enabled)
+ ret = __spmi_pmic_clkdiv_set_enable_state(clkdiv, true,
+ div_factor);
+
+unlock:
+ spin_unlock_irqrestore(&clkdiv->lock, flags);
+
+ return ret;
+}
+
+static const struct clk_ops clk_spmi_pmic_div_ops = {
+ .enable = clk_spmi_pmic_div_enable,
+ .disable = clk_spmi_pmic_div_disable,
+ .set_rate = clk_spmi_pmic_div_set_rate,
+ .recalc_rate = clk_spmi_pmic_div_recalc_rate,
+ .round_rate = clk_spmi_pmic_div_round_rate,
+};
+
+struct spmi_pmic_div_clk_cc {
+ int nclks;
+ struct clkdiv clks[];
+};
+
+static struct clk_hw *
+spmi_pmic_div_clk_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct spmi_pmic_div_clk_cc *cc = data;
+ int idx = clkspec->args[0] - 1; /* Start at 1 instead of 0 */
+
+ if (idx < 0 || idx >= cc->nclks) {
+ pr_err("%s: index value %u is invalid; allowed range [1, %d]\n",
+ __func__, clkspec->args[0], cc->nclks);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return &cc->clks[idx].hw;
+}
+
+static int spmi_pmic_clkdiv_probe(struct platform_device *pdev)
+{
+ struct spmi_pmic_div_clk_cc *cc;
+ struct clk_init_data init = {};
+ struct clkdiv *clkdiv;
+ struct clk *cxo;
+ struct regmap *regmap;
+ struct device *dev = &pdev->dev;
+ struct device_node *of_node = dev->of_node;
+ const char *parent_name;
+ int nclks, i, ret, cxo_hz;
+ char name[20];
+ u32 start;
+
+ ret = of_property_read_u32(of_node, "reg", &start);
+ if (ret < 0) {
+ dev_err(dev, "reg property reading failed\n");
+ return ret;
+ }
+
+ regmap = dev_get_regmap(dev->parent, NULL);
+ if (!regmap) {
+ dev_err(dev, "Couldn't get parent's regmap\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32(of_node, "qcom,num-clkdivs", &nclks);
+ if (ret < 0) {
+ dev_err(dev, "qcom,num-clkdivs property reading failed, ret=%d\n",
+ ret);
+ return ret;
+ }
+
+ if (!nclks)
+ return -EINVAL;
+
+ cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*cc->clks) * nclks,
+ GFP_KERNEL);
+ if (!cc)
+ return -ENOMEM;
+ cc->nclks = nclks;
+
+ cxo = clk_get(dev, "xo");
+ if (IS_ERR(cxo)) {
+ ret = PTR_ERR(cxo);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get xo clock\n");
+ return ret;
+ }
+ cxo_hz = clk_get_rate(cxo);
+ clk_put(cxo);
+
+ parent_name = of_clk_get_parent_name(of_node, 0);
+ if (!parent_name) {
+ dev_err(dev, "missing parent clock\n");
+ return -ENODEV;
+ }
+
+ init.name = name;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.ops = &clk_spmi_pmic_div_ops;
+
+ for (i = 0, clkdiv = cc->clks; i < nclks; i++) {
+ snprintf(name, sizeof(name), "div_clk%d", i + 1);
+
+ spin_lock_init(&clkdiv[i].lock);
+ clkdiv[i].base = start + i * 0x100;
+ clkdiv[i].regmap = regmap;
+ clkdiv[i].cxo_period_ns = NSEC_PER_SEC / cxo_hz;
+ clkdiv[i].hw.init = &init;
+
+ ret = devm_clk_hw_register(dev, &clkdiv[i].hw);
+ if (ret)
+ return ret;
+ }
+
+ return devm_of_clk_add_hw_provider(dev, spmi_pmic_div_clk_hw_get, cc);
+}
+
+static const struct of_device_id spmi_pmic_clkdiv_match_table[] = {
+ { .compatible = "qcom,spmi-clkdiv" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, spmi_pmic_clkdiv_match_table);
+
+static struct platform_driver spmi_pmic_clkdiv_driver = {
+ .driver = {
+ .name = "qcom,spmi-pmic-clkdiv",
+ .of_match_table = spmi_pmic_clkdiv_match_table,
+ },
+ .probe = spmi_pmic_clkdiv_probe,
+};
+module_platform_driver(spmi_pmic_clkdiv_driver);
+
+MODULE_DESCRIPTION("QCOM SPMI PMIC clkdiv driver");
+MODULE_LICENSE("GPL v2");
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2017-11-21 10:12    [W:0.055 / U:7.516 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site