lkml.org 
[lkml]   [2017]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V14 19/24] mmc: block: blk-mq: Check error bits and save the exception bit when polling card busy
Date
Check error bits and save the exception bit when polling card busy.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/core/block.c | 38 ++++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 7eb55f2dffa9..ac976c84571f 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1495,15 +1495,18 @@ static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq,
}
}

-#define CMD_ERRORS \
- (R1_OUT_OF_RANGE | /* Command argument out of range */ \
- R1_ADDRESS_ERROR | /* Misaligned address */ \
+#define CMD_ERRORS_EXCL_OOR \
+ (R1_ADDRESS_ERROR | /* Misaligned address */ \
R1_BLOCK_LEN_ERROR | /* Transferred block length incorrect */\
R1_WP_VIOLATION | /* Tried to write to protected block */ \
R1_CARD_ECC_FAILED | /* Card ECC failed */ \
R1_CC_ERROR | /* Card controller error */ \
R1_ERROR) /* General/unknown error */

+#define CMD_ERRORS \
+ (CMD_ERRORS_EXCL_OOR | \
+ R1_OUT_OF_RANGE) /* Command argument out of range */ \
+
static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq)
{
u32 val;
@@ -2162,20 +2165,39 @@ static inline bool mmc_blk_rq_error(struct mmc_blk_request *brq)
brq->data.error || brq->cmd.resp[0] & CMD_ERRORS;
}

+static inline bool mmc_blk_oor_valid(struct mmc_blk_request *brq)
+{
+ return !!brq->mrq.sbc;
+}
+
+static inline u32 mmc_blk_stop_err_bits(struct mmc_blk_request *brq)
+{
+ return mmc_blk_oor_valid(brq) ? CMD_ERRORS : CMD_ERRORS_EXCL_OOR;
+}
+
static int mmc_blk_card_busy(struct mmc_card *card, struct request *req)
{
struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
- bool gen_err = false;
+ u32 status = 0;
int err;

if (mmc_host_is_spi(card->host) || rq_data_dir(req) == READ)
return 0;

- err = card_busy_detect_err(card, true, req, &gen_err);
+ err = card_busy_detect(card, true, req, &status);
+
+ /*
+ * Do not assume data transferred correctly if there are any error bits
+ * set.
+ */
+ if (!err && status & mmc_blk_stop_err_bits(&mqrq->brq)) {
+ mqrq->brq.data.bytes_xfered = 0;
+ err = -EIO;
+ }

- /* Copy the general error bit so it will be seen later on */
- if (gen_err)
- mqrq->brq.stop.resp[0] |= R1_ERROR;
+ /* Copy the exception bit so it will be seen later on */
+ if (mmc_card_mmc(card) && status & R1_EXCEPTION_EVENT)
+ mqrq->brq.cmd.resp[0] |= R1_EXCEPTION_EVENT;

return err;
}
--
1.9.1
\
 
 \ /
  Last update: 2017-11-21 14:46    [W:0.164 / U:29.148 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site