lkml.org 
[lkml]   [2017]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 04/16] phy: qcom-qusb2: Power-on PHY before initialization
Date
PHY must be powered on before turning ON clocks and
attempting to initialize it. Driver is exposing
separate init and power_on routines for this.
Apparently USB dwc3 core driver performs power-on
after init. Also, poweron and init for QUSB2 PHY
need to be executed together always, hence remove
poweron callback from phy_ops and explicitly perform
this from init, similar changes needed for poweroff.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 47 +++++++++++------------------------
1 file changed, 15 insertions(+), 32 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 6c57524..4a5b2a1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -195,54 +195,31 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
qusb2_setbits(qphy->base, QUSB2PHY_PORT_TUNE2, val[0] << 0x4);
}

-static int qusb2_phy_poweron(struct phy *phy)
+static int qusb2_phy_init(struct phy *phy)
{
struct qusb2_phy *qphy = phy_get_drvdata(phy);
- int num = ARRAY_SIZE(qphy->vregs);
+ unsigned int val;
+ unsigned int clk_scheme;
int ret;

- dev_vdbg(&phy->dev, "%s(): Powering-on QUSB2 phy\n", __func__);
+ dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);

/* turn on regulator supplies */
- ret = regulator_bulk_enable(num, qphy->vregs);
+ ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
if (ret)
return ret;

ret = clk_prepare_enable(qphy->iface_clk);
if (ret) {
dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret);
- regulator_bulk_disable(num, qphy->vregs);
- return ret;
+ goto poweroff_phy;
}

- return 0;
-}
-
-static int qusb2_phy_poweroff(struct phy *phy)
-{
- struct qusb2_phy *qphy = phy_get_drvdata(phy);
-
- clk_disable_unprepare(qphy->iface_clk);
-
- regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
-
- return 0;
-}
-
-static int qusb2_phy_init(struct phy *phy)
-{
- struct qusb2_phy *qphy = phy_get_drvdata(phy);
- unsigned int val;
- unsigned int clk_scheme;
- int ret;
-
- dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
-
/* enable ahb interface clock to program phy */
ret = clk_prepare_enable(qphy->cfg_ahb_clk);
if (ret) {
dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
- return ret;
+ goto disable_iface_clk;
}

/* Perform phy reset */
@@ -344,6 +321,11 @@ static int qusb2_phy_init(struct phy *phy)
reset_control_assert(qphy->phy_reset);
disable_ahb_clk:
clk_disable_unprepare(qphy->cfg_ahb_clk);
+disable_iface_clk:
+ clk_disable_unprepare(qphy->iface_clk);
+poweroff_phy:
+ regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+
return ret;
}

@@ -361,6 +343,9 @@ static int qusb2_phy_exit(struct phy *phy)
reset_control_assert(qphy->phy_reset);

clk_disable_unprepare(qphy->cfg_ahb_clk);
+ clk_disable_unprepare(qphy->iface_clk);
+
+ regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);

return 0;
}
@@ -368,8 +353,6 @@ static int qusb2_phy_exit(struct phy *phy)
static const struct phy_ops qusb2_phy_gen_ops = {
.init = qusb2_phy_init,
.exit = qusb2_phy_exit,
- .power_on = qusb2_phy_poweron,
- .power_off = qusb2_phy_poweroff,
.owner = THIS_MODULE,
};

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2017-11-21 10:30    [W:0.032 / U:1.200 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site