lkml.org 
[lkml]   [2017]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] net: ethernet: freescale: simplify fec_reset_phy
Date
From: Richard Leitner <richard.leitner@skidata.com>

The fec_reset_phy function allowed only one execution during probeing.
To make it more usable move the dt parsing and gpio allocation to the
probe function. The parameters of the phy reset are added to the
fec_enet_private struct. As a result the fec_reset_phy function may be
called anytime after probe.

One checkpatch.pl warning (too long line) is ignored. This is due to the
fact a string (dt property name) otherwise needs to be split over
multiple lines, which is counterproductive for the readability.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
---
drivers/net/ethernet/freescale/fec.h | 4 ++
drivers/net/ethernet/freescale/fec_main.c | 88 ++++++++++++++++---------------
2 files changed, 50 insertions(+), 42 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 5385074b3b7d..401c4eabf08a 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -539,6 +539,10 @@ struct fec_enet_private {
int pause_flag;
int wol_flag;
u32 quirks;
+ int phy_reset;
+ int phy_reset_duration;
+ int phy_reset_post_delay;
+ bool phy_reset_active_high;

struct napi_struct napi;
int csum_flags;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 610573855213..06a7caca0cee 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3212,62 +3212,36 @@ static int fec_enet_init(struct net_device *ndev)
}

#ifdef CONFIG_OF
-static int fec_reset_phy(struct platform_device *pdev)
+static int fec_reset_phy(struct net_device *ndev)
{
- int err, phy_reset;
- bool active_high = false;
- int msec = 1, phy_post_delay = 0;
- struct device_node *np = pdev->dev.of_node;
-
- if (!np)
- return 0;
-
- err = of_property_read_u32(np, "phy-reset-duration", &msec);
- /* A sane reset duration should not be longer than 1s */
- if (!err && msec > 1000)
- msec = 1;
+ struct fec_enet_private *fep = netdev_priv(ndev);

- phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
- if (phy_reset == -EPROBE_DEFER)
- return phy_reset;
- else if (!gpio_is_valid(phy_reset))
+ if (!fep->phy_reset)
return 0;

- err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
- /* valid reset duration should be less than 1s */
- if (!err && phy_post_delay > 1000)
- return -EINVAL;
-
- active_high = of_property_read_bool(np, "phy-reset-active-high");
+ gpio_set_value_cansleep(fep->phy_reset, fep->phy_reset_active_high);

- err = devm_gpio_request_one(&pdev->dev, phy_reset,
- active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
- "phy-reset");
- if (err) {
- dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
- return err;
- }
-
- if (msec > 20)
- msleep(msec);
+ if (fep->phy_reset_duration > 20)
+ msleep(fep->phy_reset_duration);
else
- usleep_range(msec * 1000, msec * 1000 + 1000);
+ usleep_range(fep->phy_reset_duration * 1000,
+ fep->phy_reset_duration * 1000 + 1000);

- gpio_set_value_cansleep(phy_reset, !active_high);
+ gpio_set_value_cansleep(fep->phy_reset, !fep->phy_reset_active_high);

- if (!phy_post_delay)
+ if (!fep->phy_reset_post_delay)
return 0;

- if (phy_post_delay > 20)
- msleep(phy_post_delay);
+ if (fep->phy_reset_post_delay > 20)
+ msleep(fep->phy_reset_post_delay);
else
- usleep_range(phy_post_delay * 1000,
- phy_post_delay * 1000 + 1000);
+ usleep_range(fep->phy_reset_post_delay * 1000,
+ fep->phy_reset_post_delay * 1000 + 1000);

return 0;
}
#else /* CONFIG_OF */
-static int fec_reset_phy(struct platform_device *pdev)
+static int fec_reset_phy(struct net_device *ndev)
{
/*
* In case of platform probe, the reset has been done
@@ -3400,6 +3374,36 @@ fec_probe(struct platform_device *pdev)
}
fep->phy_node = phy_node;

+ fep->phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
+ if (gpio_is_valid(fep->phy_reset)) {
+ ret = of_property_read_u32(np, "phy-reset-duration",
+ &fep->phy_reset_duration);
+ /* A sane reset duration should not be longer than 1s */
+ if (!ret && fep->phy_reset_post_delay > 1000)
+ fep->phy_reset_post_delay = 1;
+
+ ret = of_property_read_u32(np, "phy-reset-post-delay",
+ &fep->phy_reset_post_delay);
+ /* valid post reset delay should be less than 1s */
+ if (!ret && fep->phy_reset_post_delay > 1000)
+ fep->phy_reset_post_delay = 1;
+
+ fep->phy_reset_active_high = of_property_read_bool(np, "phy-reset-active-high");
+
+ ret = devm_gpio_request_one(&pdev->dev, fep->phy_reset,
+ fep->phy_reset_active_high ?
+ GPIOF_OUT_INIT_HIGH :
+ GPIOF_OUT_INIT_LOW,
+ "phy-reset");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get reset-gpios: %d\n",
+ ret);
+ goto failed_phy;
+ }
+ } else {
+ fep->phy_reset = 0;
+ }
+
ret = of_get_phy_mode(pdev->dev.of_node);
if (ret < 0) {
pdata = dev_get_platdata(&pdev->dev);
@@ -3472,7 +3476,7 @@ fec_probe(struct platform_device *pdev)
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);

- ret = fec_reset_phy(pdev);
+ ret = fec_reset_phy(ndev);
if (ret)
goto failed_reset;

--
2.11.0
\
 
 \ /
  Last update: 2017-11-20 09:37    [W:0.060 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site