lkml.org 
[lkml]   [2017]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] iommu/ipmmu-vmsa: Do not replace bus IOMMU ops on driver init.
On Mon, 20 Nov 2017 14:25:14 +0000
Liviu Dudau <Liviu.Dudau@arm.com> wrote:

> On Fri, Oct 13, 2017 at 04:48:45PM +0100, Robin Murphy wrote:
> > Hi Joerg,
>
> Hi,
>
> >
> > On 20/09/17 15:13, Liviu Dudau wrote:
> > > If the IPMMU driver is compiled in the kernel it will replace the
> > > platform bus IOMMU ops on running the ipmmu_init() function, regardless
> > > if there is any IPMMU hardware present or not. This screws up systems
> > > that just want to build a generic kernel that runs on multiple platforms
> > > and use a different IOMMU implementation.
> > >
> > > Move the bus_set_iommu() call at the end of the ipmmu_probe() function
> > > when we know that hardware is present. With current IOMMU framework it
> > > should be safe (at least for OF case).
> > >
> > > Now that the ipmmu_init() and ipmmu_exit() functions are simple calls to
> > > platform_driver_register() and platform_driver_unregister(), replace
> > > them with the module_platform_driver() macro call.
> >
> > Are you OK with taking this patch as a fix for 4.14, or would you rather
> > have something that can safely backport past 4.12 without implicit
> > dependencies? This is a config/link-order dependent thing that's been
> > lurking since the beginning, but only coming to light now that other
> > drivers are changing their behaviour, so I don't think there's really a
> > single Fixes: commit that can be singled out.
>
> Can someone update me on the fate of this patch? Can someone queue it
> for the next release?

Sorry, this is another patch that wasn't on my radar while Joerg is out
on paternity leave. I didn't follow the replies to Laurent's question
about ordering and perhaps this plays in to Robin asking about fixes
for specific kernel versions. It seems there are some changes
elsewhere that somehow defer the ordering problem or don't matter on an
Arm Juno board (whatever that is). Can someone explain? If there's a
desire for a stable tag for this, it seems like we need to know
explicitly the range where it's safe to apply. Also, the patch needs
to be updated and re-evaluated in the presence of:

cda52fcd999f iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE()

Thanks,
Alex

> > > Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
> > > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > > ---
> > > drivers/iommu/ipmmu-vmsa.c | 29 +++++------------------------
> > > 1 file changed, 5 insertions(+), 24 deletions(-)
> > >
> > > diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
> > > index 195d6e93ac718..31912997bffdf 100644
> > > --- a/drivers/iommu/ipmmu-vmsa.c
> > > +++ b/drivers/iommu/ipmmu-vmsa.c
> > > @@ -966,10 +966,11 @@ static int ipmmu_probe(struct platform_device *pdev)
> > > return ret;
> > >
> > > /*
> > > - * We can't create the ARM mapping here as it requires the bus to have
> > > - * an IOMMU, which only happens when bus_set_iommu() is called in
> > > - * ipmmu_init() after the probe function returns.
> > > + * Now that we have validated the presence of the hardware, set
> > > + * the bus IOMMU ops to enable future domain and device setup.
> > > */
> > > + if (!iommu_present(&platform_bus_type))
> > > + bus_set_iommu(&platform_bus_type, &ipmmu_ops);
> > >
> > > platform_set_drvdata(pdev, mmu);
> > >
> > > @@ -1006,27 +1007,7 @@ static struct platform_driver ipmmu_driver = {
> > > .remove = ipmmu_remove,
> > > };
> > >
> > > -static int __init ipmmu_init(void)
> > > -{
> > > - int ret;
> > > -
> > > - ret = platform_driver_register(&ipmmu_driver);
> > > - if (ret < 0)
> > > - return ret;
> > > -
> > > - if (!iommu_present(&platform_bus_type))
> > > - bus_set_iommu(&platform_bus_type, &ipmmu_ops);
> > > -
> > > - return 0;
> > > -}
> > > -
> > > -static void __exit ipmmu_exit(void)
> > > -{
> > > - return platform_driver_unregister(&ipmmu_driver);
> > > -}
> > > -
> > > -subsys_initcall(ipmmu_init);
> > > -module_exit(ipmmu_exit);
> > > +module_platform_driver(ipmmu_driver);
> > >
> > > MODULE_DESCRIPTION("IOMMU API for Renesas VMSA-compatible IPMMU");
> > > MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
> > >
> >
>

\
 
 \ /
  Last update: 2017-11-20 23:02    [W:0.068 / U:30.052 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site