lkml.org 
[lkml]   [2017]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] mfd: syscon: Add hardware spinlock support
Date
Some system control registers need hardware spinlock to synchronize
between the multiple subsystems, so we should add hardware spinlock
support for syscon.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes since v2:
- Add acked tag from Rob.

Changes since v1:
- Remove timeout configuration.
- Modify the binding file to add hwlocks.

Note: The hwspinlock support in regmap was merged by commit:
(8698b9364710: "regmap: Add hardware spinlock support")
The hwspinlock was changed to a bool by commit:
(d048236dfdfe: "hwspinlock: Change hwspinlock to a bool")
---
Documentation/devicetree/bindings/mfd/syscon.txt | 1 +
drivers/mfd/syscon.c | 7 +++++++
2 files changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
index 8b92d45..f464cc8 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.txt
+++ b/Documentation/devicetree/bindings/mfd/syscon.txt
@@ -16,6 +16,7 @@ Required properties:
Optional property:
- reg-io-width: the size (in bytes) of the IO accesses that should be
performed on the device.
+- hwlocks: reference to a phandle of a hardware spinlock provider node.

Examples:
gpr: iomuxc-gpr@20e0000 {
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index b93fe4c..f1dccce 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -13,6 +13,7 @@
*/

#include <linux/err.h>
+#include <linux/hwspinlock.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/list.h>
@@ -87,6 +88,12 @@ static struct syscon *of_syscon_register(struct device_node *np)
if (ret)
reg_io_width = 4;

+ ret = of_hwspin_lock_get_id(np, 0);
+ if (ret > 0) {
+ syscon_config.hwlock_id = ret;
+ syscon_config.hwlock_mode = HWLOCK_IRQSTATE;
+ }
+
syscon_config.reg_stride = reg_io_width;
syscon_config.val_bits = reg_io_width * 8;
syscon_config.max_register = resource_size(&res) - reg_io_width;
--
1.9.1
\
 
 \ /
  Last update: 2017-11-20 07:55    [W:0.037 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site