lkml.org 
[lkml]   [2017]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 4/5] DTS: gta04: add serdev node for w2sg00x4
From
Date
Hi Tony,

> Am 17.11.2017 um 18:08 schrieb Tony Lindgren <tony@atomide.com>:
>
> * H. Nikolaus Schaller <hns@goldelico.com> [171115 21:41]:
>> GTA04 has a W2SG0004/84 connected to UART2 of the OMAP3
>> processor. A GPIO can pulse the on/off toggle switch.
>>
>> The VSIM regulator is used to power on/off the LNA of an external
>> active GPS antenna so that a driver can turn the LNA off if GPS is
>> not needed to save battery energy.
>>
>> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
>> ---
>> arch/arm/boot/dts/omap3-gta04.dtsi | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
>> index 4504908c23fe..e967d738aaaf 100644
>> --- a/arch/arm/boot/dts/omap3-gta04.dtsi
>> +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
>> @@ -477,6 +477,12 @@
>> &uart2 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&uart2_pins>;
>> +
>> + gps: gps {
>> + compatible = "wi2wi,w2sg0004";
>> + lna-supply = <&vsim>; /* LNA regulator */
>> + enable-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* GPIO_145: trigger for turning on/off w2sg0004 */
>> + };
>> };
>
> How about move the comment above the node to avoid long lines?
> Or just change it to gpio_145 for the comment as the property
> is already enable-gpios?
>
> Regards,
>
> Tony

Done so that it will be included in next version.

BR and thanks,
Nikolaus

\
 
 \ /
  Last update: 2017-11-20 06:30    [W:0.035 / U:1.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site