lkml.org 
[lkml]   [2017]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/3] interconnect: Add Qualcomm msm8916 interconnect provider driver
From
Date
Hi Amit,

On 11/02/2017 09:28 AM, Amit Kucheria wrote:
> On Fri, Sep 8, 2017 at 10:48 PM, Georgi Djakov <georgi.djakov@linaro.org> wrote:
>> Add driver for the Qualcomm interconnect buses found in msm8916 based
>> platforms. This patch contains only a partial topology to make reviewing
>> easier.
>>
>> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
>> ---
>> drivers/interconnect/Kconfig | 5 +
>> drivers/interconnect/Makefile | 1 +
>> drivers/interconnect/qcom/Kconfig | 11 +
>> drivers/interconnect/qcom/Makefile | 1 +
>> drivers/interconnect/qcom/interconnect_msm8916.c | 375 +++++++++++++++++++++++
>> include/linux/interconnect/qcom-msm8916.h | 92 ++++++
>> 6 files changed, 485 insertions(+)
>> create mode 100644 drivers/interconnect/qcom/Kconfig
>> create mode 100644 drivers/interconnect/qcom/Makefile
>> create mode 100644 drivers/interconnect/qcom/interconnect_msm8916.c
>> create mode 100644 include/linux/interconnect/qcom-msm8916.h
>>
>> diff --git a/drivers/interconnect/Kconfig b/drivers/interconnect/Kconfig
>> index 1e50e951cdc1..b123a76e2f9d 100644
>> --- a/drivers/interconnect/Kconfig
>> +++ b/drivers/interconnect/Kconfig
>> @@ -8,3 +8,8 @@ menuconfig INTERCONNECT
>>
>> If unsure, say no.
>>
>> +if INTERCONNECT
>> +
>> +source "drivers/interconnect/qcom/Kconfig"
>> +
>> +endif
>> diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile
>> index d9da6a6c3560..62a01de24aeb 100644
>> --- a/drivers/interconnect/Makefile
>> +++ b/drivers/interconnect/Makefile
>> @@ -1 +1,2 @@
>> obj-$(CONFIG_INTERCONNECT) += interconnect.o
>> +obj-$(CONFIG_INTERCONNECT_QCOM) += qcom/
>> diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
>> new file mode 100644
>> index 000000000000..86465dc37bd4
>> --- /dev/null
>> +++ b/drivers/interconnect/qcom/Kconfig
>> @@ -0,0 +1,11 @@
>> +config INTERCONNECT_QCOM
>> + bool "Qualcomm Network-on-Chip interconnect drivers"
>> + depends on INTERCONNECT
>> + depends on ARCH_QCOM || COMPILE_TEST
>> + default y
>> +
>> +config INTERCONNECT_QCOM_MSM8916
>> + tristate "Qualcomm MSM8916 interconnect driver"
>> + depends on INTERCONNECT_QCOM
>> + help
>> + This is a driver for the Qualcomm Network-on-Chip on msm8916-based platforms.
>> diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
>> new file mode 100644
>> index 000000000000..0831080e1100
>> --- /dev/null
>> +++ b/drivers/interconnect/qcom/Makefile
>> @@ -0,0 +1 @@
>> +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += interconnect_msm8916.o
>> diff --git a/drivers/interconnect/qcom/interconnect_msm8916.c b/drivers/interconnect/qcom/interconnect_msm8916.c
>> new file mode 100644
>> index 000000000000..9b001e100974
>> --- /dev/null
>> +++ b/drivers/interconnect/qcom/interconnect_msm8916.c
>> @@ -0,0 +1,375 @@
>> +/*
>> + * Copyright (C) 2017 Linaro Ltd
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/device.h>
>> +#include <linux/io.h>
>> +#include <linux/interconnect-provider.h>
>> +#include <linux/interconnect/qcom-msm8916.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +
>> +#define to_qcom_icp(_icp) \
>> + container_of(_icp, struct qcom_interconnect_provider, icp)
>> +#define to_qcom_node(_node) \
>> + container_of(_node, struct qcom_interconnect_node, node)
>> +
>> +enum qcom_bus_type {
>> + QCOM_BUS_TYPE_NOC = 0,
>> + QCOM_BUS_TYPE_MEM,
>> +};
>> +
>> +struct qcom_interconnect_provider {
>> + struct icp icp;
>> + void __iomem *base;
>> + struct clk *bus_clk;
>> + struct clk *bus_a_clk;
>> + u32 base_offset;
>> + u32 qos_offset;
>> + enum qcom_bus_type type;
>> +};
>> +
>> +struct qcom_interconnect_node {
>> + struct interconnect_node node;
>> + unsigned char *name;
>> + struct interconnect_node *links[8];
>
> Magic number 8. Replace with 8916_MAX_LINKS or something.
>

Ok, sure!

>> + u16 id;
>> + u16 num_links;
>> + u16 port;
>> + u16 buswidth;
>
> Comment on what a buswidth is just to be clear
>

Ok!

>> + u64 rate;
>
> Comment on units

Ok!

>
>> +};
>> +
>> +static struct qcom_interconnect_node snoc_int_0;
>> +static struct qcom_interconnect_node snoc_int_1;
>> +static struct qcom_interconnect_node snoc_int_bimc;
>> +static struct qcom_interconnect_node snoc_bimc_0_mas;
>> +static struct qcom_interconnect_node pnoc_snoc_slv;
>> +
>> +static struct qcom_interconnect_node snoc_bimc_0_slv;
>
> IMO, saving an 'a' and 'e' is not worth it for the sake of
> readability. Just use 'slave' and 'master' in the names.
>

Currently i prefer to keep it this way. Maybe i can put a comment
somewhere.

>> +static struct qcom_interconnect_node slv_ebi_ch0;
>> +
>> +static struct qcom_interconnect_node pnoc_int_1;
>> +static struct qcom_interconnect_node mas_pnoc_sdcc_1;
>> +static struct qcom_interconnect_node mas_pnoc_sdcc_2;
>> +static struct qcom_interconnect_node pnoc_snoc_mas;
>> +
>> +struct qcom_interconnect_desc {
>> + struct qcom_interconnect_node **nodes;
>> + size_t num_nodes;
>> +};
>> +
>> +static struct qcom_interconnect_node snoc_int_0 = {
>> + .id = 10004,
>> + .name = "snoc-int-0",
>> +#if 0
>
> Please get rid if these.
>

I have included only a small part of the topology for this SoC for
simplicity. Will remove them.

>> + .links = { &snoc_pnoc_mas.node },
>> + .num_links = 1,
>> +#endif
>> + .buswidth = 8,
>> +};
>> +
>> +static struct qcom_interconnect_node snoc_int_1 = {
>> + .id = 10005,
>> + .name = "snoc-int-1",
>> +#if 0
>> + .links = { &slv_apss.node, &slv_cats_0.node, &slv_cats_1.node },
>> + .num_links = 3,
>> +#endif
>> + .buswidth = 8,
>> +};
>> +
>> +static struct qcom_interconnect_node snoc_int_bimc = {
>> + .id = 10006,
>> + .name = "snoc-bimc",
>> + .links = { &snoc_bimc_0_mas.node },
>> + .num_links = 1,
>> + .buswidth = 8,
>> +};
>> +
>> +static struct qcom_interconnect_node snoc_bimc_0_mas = {
>> + .id = 10007,
>> + .name = "snoc-bimc-0-mas",
>> + .links = { &snoc_bimc_0_slv.node },
>> + .num_links = 1,
>> + .buswidth = 8,
>> +};
>> +
>> +static struct qcom_interconnect_node pnoc_snoc_slv = {
>> + .id = 10011,
>> + .name = "snoc-pnoc",
>> + .links = { &snoc_int_0.node, &snoc_int_bimc.node, &snoc_int_1.node },
>> + .num_links = 3,
>> + .buswidth = 8,
>> +};
>
>
> Suggest replacing this list of definitions with a macro such as:
>
> #define DEFINE_XCON_NODE(_name, _id, numlinks, buswidth, ...) \
> static struct qcom_interconnect_node _name; \
> static struct qcom_interconnect_node _name = { \
> .id = _id,
> \
> .name = _name,
> \
> .buswidth = buswidth,
> \
> .num_links = numlinks,
> \
> .links = { __VA_ARGS__ },
> \
> };
>
>
> This will reduce these definitions to a series of definitions as
> follows that improves readability.
>
> DEFINE_XCON_NODE(snoc_int_0, 10004, 1, 8, &snoc_pnoc_mas.node)
> DEFINE_XCON_NODE(snoc_int_1, 10005, 3, 8, &snoc_apss.node,
> &slv_cats_0.node, &slv_cats_1.node)
> DEFINE_XCON_NODE(snoc_int_bimc, 10006, 1, 8, &snoc_bimc_0_mas.node)
>
> If fact you could take it one step further and move the definitions
> under the provider definition below directly.
>

Will do it. Thanks!

[..]

>> +static struct qcom_interconnect_node *msm8916_pnoc_nodes[] = {
>> + [PNOC_INT_1] = &pnoc_int_1,
>> + [MAS_PNOC_SDCC_1] = &mas_pnoc_sdcc_1,
>> + [MAS_PNOC_SDCC_2] = &mas_pnoc_sdcc_2,
>> + [PNOC_SNOC_MAS] = &pnoc_snoc_mas,
>> +};
>
> There are big holes in this node array definition because the index
> values are not contiguous. Are you planning fill these in later for
> each of the providers?
>

Yes, exactly. I trying to keep this patch as small as possible to be
more review friendly. At some time will add the full topology.

Thanks for the comments!

BR,
Georgi

\
 
 \ /
  Last update: 2017-11-02 17:02    [W:0.700 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site