lkml.org 
[lkml]   [2017]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: sun7i: Add Cubietech Einstein A20 board device-tree
Hi Frank,

Thanks for your patch.

On Thu, Nov 02, 2017 at 03:35:34PM +0100, Frank Kunz wrote:
> From: Frank Kunz <xxxxxmichl@googlemail.com>
>
> The Einstein A20 board is a Allwinner A20 based board with a credit card
> form factor.
>
> Features:
> - Allwinner A20 SoC
> - DDR3 1GB RAM
> - 8GiB eMMC
> - AP6210 wifi/Bluetooth
> - RTC
> - Micro USB-OTG connector
> - UART0 debugging port
> - 200 pins stamp hole package
>
> Signed-off-by: Frank Kunz <xxxxxmichl@googlemail.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun7i-a20-einstein.dts | 200 +++++++++++++++++++++++++++++++
> 2 files changed, 201 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun7i-a20-einstein.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faf46abaa4a2..f9158400ea0f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -878,6 +878,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-bananapro.dtb \
> sun7i-a20-cubieboard2.dtb \
> sun7i-a20-cubietruck.dtb \
> + sun7i-a20-einstein.dtb \

I guess it's not that obvious from what company that board is coming
from. Could you turn it into cubietech-einstein please?

> sun7i-a20-hummingbird.dtb \
> sun7i-a20-itead-ibox.dtb \
> sun7i-a20-i12-tvbox.dtb \
> diff --git a/arch/arm/boot/dts/sun7i-a20-einstein.dts b/arch/arm/boot/dts/sun7i-a20-einstein.dts
> new file mode 100644
> index 000000000000..59d46b08f21c
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-einstein.dts
> @@ -0,0 +1,200 @@
> +/*
> + * Copyright 2017 Frank Kunz
> + *
> + * Frank Kunz <xxxxxmichl@googlemail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun7i-a20.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "Cubietech Einstein A20";
> + compatible = "cubietech,einstein-a20", "allwinner,sun7i-a20";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + mmc3_pwrseq: mmc3_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc3_pwrseq_pin_ea20>;

You don't need those GPIO pinctrl nodes, you can remove all of them.

> + reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI-SHDN */
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <&reg_dcdc2>;
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins_a>;
> + status = "okay";
> +
> + axp209: pmic@34 {
> + reg = <0x34>;
> + interrupt-parent = <&nmi_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&mmc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc2_pins_a>;
> + vmmc-supply = <&reg_vcc3v3>;

What regulator is this connected to on the PMIC?

> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&mmc3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc3_pins_a>;
> + vmmc-supply = <&reg_vcc3v3>;

Same question here.

Looks good otherwise, thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-11-02 16:59    [W:0.180 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site