lkml.org 
[lkml]   [2017]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] clk: at91: utmi: set the mainck rate
On 09/06, Ludovic Desroches wrote:
> By default, it is assumed that the UTMI clock is generated from a 12 MHz
> reference clock (MAINCK). If it's not the case, the FREQ field of the
> SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the
> proper way.
>
> The UTMI clock has a fixed rate of 480 MHz. In fact, there is no
> multiplier we can configure. The multiplier is managed internally,
> depending on the reference clock frequency, to achieve the target of
> 480 MHz.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> ---

Applied to clk-next

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2017-11-02 07:41    [W:0.047 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site