lkml.org 
[lkml]   [2017]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/4] iio: adc: at91-sama5d2_adc: ack DRDY irq in direct mode
On Wed, 15 Nov 2017 14:56:48 +0200
Eugen Hristev <eugen.hristev@microchip.com> wrote:

> Need to acknowledge DRDY irq in direct mode/ software
> triggered mode. Otherwise, on the next conversion, overrun
> flag will be raised, which is not a correct state.
> This doesn't affect the functionality, but will generate
> possible incorrect overrun reports.
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>

Applied. Thanks.
> ---
> drivers/iio/adc/at91-sama5d2_adc.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
> index 11d34a8..274cb5e 100644
> --- a/drivers/iio/adc/at91-sama5d2_adc.c
> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
> @@ -787,6 +787,9 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
> at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel));
> at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel));
>
> + /* Needed to ACK the DRDY interruption */
> + at91_adc_readl(st, AT91_SAMA5D2_LCDR);
> +
> mutex_unlock(&st->lock);
>
> iio_device_release_direct_mode(indio_dev);

\
 
 \ /
  Last update: 2017-11-19 12:29    [W:0.058 / U:9.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site