lkml.org 
[lkml]   [2017]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v4,2/3] drivers: hwmon: Add W83773G driver
On Mon, Nov 13, 2017 at 11:27:33AM +0800, Lei YU wrote:
> Nuvoton W83773G is a hardware monitor IC providing one local
> temperature and two remote temperature sensors.
>
> Signed-off-by: Lei YU <mine260309@gmail.com>

Applied to hwmon-next.

Thanks,
Guenter

> ---
> v2:
> - Rewrite the driver using regmap
> - Add offset and update_interval
> v3:
> - Use devm_hwmon_device_register_with_info() with is_visible/read/write
> functions.
> v4:
> - Fix review comments.
> ---
> drivers/hwmon/Kconfig | 10 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/w83773g.c | 329 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 340 insertions(+)
> create mode 100644 drivers/hwmon/w83773g.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index d654314..11c6248 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1710,6 +1710,16 @@ config SENSORS_VT8231
> This driver can also be built as a module. If so, the module
> will be called vt8231.
>
> +config SENSORS_W83773G
> + tristate "Nuvoton W83773G"
> + depends on I2C
> + help
> + If you say yes here you get support for the Nuvoton W83773G hardware
> + monitoring chip.
> +
> + This driver can also be built as a module. If so, the module
> + will be called w83773g.
> +
> config SENSORS_W83781D
> tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
> depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index c84d978..0649ad8 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
> # asb100, then w83781d go first, as they can override other drivers' addresses.
> obj-$(CONFIG_SENSORS_ASB100) += asb100.o
> obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
> +obj-$(CONFIG_SENSORS_W83773G) += w83773g.o
> obj-$(CONFIG_SENSORS_W83792D) += w83792d.o
> obj-$(CONFIG_SENSORS_W83793) += w83793.o
> obj-$(CONFIG_SENSORS_W83795) += w83795.o
> diff --git a/drivers/hwmon/w83773g.c b/drivers/hwmon/w83773g.c
> new file mode 100644
> index 0000000..0b97c28
> --- /dev/null
> +++ b/drivers/hwmon/w83773g.c
> @@ -0,0 +1,329 @@
> +/*
> + * Copyright (C) 2017 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Driver for the Nuvoton W83773G SMBus temperature sensor IC.
> + * Supported models: W83773G
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/err.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +/* W83773 has 3 channels */
> +#define W83773_CHANNELS 3
> +
> +/* The W83773 registers */
> +#define W83773_CONVERSION_RATE_REG_READ 0x04
> +#define W83773_CONVERSION_RATE_REG_WRITE 0x0A
> +#define W83773_MANUFACTURER_ID_REG 0xFE
> +#define W83773_LOCAL_TEMP 0x00
> +
> +static const u8 W83773_STATUS[2] = { 0x02, 0x17 };
> +
> +static const u8 W83773_TEMP_LSB[2] = { 0x10, 0x25 };
> +static const u8 W83773_TEMP_MSB[2] = { 0x01, 0x24 };
> +
> +static const u8 W83773_OFFSET_LSB[2] = { 0x12, 0x16 };
> +static const u8 W83773_OFFSET_MSB[2] = { 0x11, 0x15 };
> +
> +/* this is the number of sensors in the device */
> +static const struct i2c_device_id w83773_id[] = {
> + { "w83773g" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, w83773_id);
> +
> +static const struct of_device_id w83773_of_match[] = {
> + {
> + .compatible = "nuvoton,w83773g"
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, w83773_of_match);
> +
> +static inline long temp_of_local(s8 reg)
> +{
> + return reg * 1000;
> +}
> +
> +static inline long temp_of_remote(s8 hb, u8 lb)
> +{
> + return (hb << 3 | lb >> 5) * 125;
> +}
> +
> +static int get_local_temp(struct regmap *regmap, long *val)
> +{
> + unsigned int regval;
> + int ret;
> +
> + ret = regmap_read(regmap, W83773_LOCAL_TEMP, &regval);
> + if (ret < 0)
> + return ret;
> +
> + *val = temp_of_local(regval);
> + return 0;
> +}
> +
> +static int get_remote_temp(struct regmap *regmap, int index, long *val)
> +{
> + unsigned int regval_high;
> + unsigned int regval_low;
> + int ret;
> +
> + ret = regmap_read(regmap, W83773_TEMP_MSB[index], &regval_high);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_read(regmap, W83773_TEMP_LSB[index], &regval_low);
> + if (ret < 0)
> + return ret;
> +
> + *val = temp_of_remote(regval_high, regval_low);
> + return 0;
> +}
> +
> +static int get_fault(struct regmap *regmap, int index, long *val)
> +{
> + unsigned int regval;
> + int ret;
> +
> + ret = regmap_read(regmap, W83773_STATUS[index], &regval);
> + if (ret < 0)
> + return ret;
> +
> + *val = (u8)regval & 0x04 >> 2;
> + return 0;
> +}
> +
> +static int get_offset(struct regmap *regmap, int index, long *val)
> +{
> + unsigned int regval_high;
> + unsigned int regval_low;
> + int ret;
> +
> + ret = regmap_read(regmap, W83773_OFFSET_MSB[index], &regval_high);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_read(regmap, W83773_OFFSET_LSB[index], &regval_low);
> + if (ret < 0)
> + return ret;
> +
> + *val = temp_of_remote(regval_high, regval_low);
> + return 0;
> +}
> +
> +static int set_offset(struct regmap *regmap, int index, long val)
> +{
> + int ret;
> + u8 high_byte;
> + u8 low_byte;
> +
> + val = clamp_val(val, -127825, 127825);
> + /* offset value equals to (high_byte << 3 | low_byte >> 5) * 125 */
> + val /= 125;
> + high_byte = val >> 3;
> + low_byte = (val & 0x07) << 5;
> +
> + ret = regmap_write(regmap, W83773_OFFSET_MSB[index], high_byte);
> + if (ret < 0)
> + return ret;
> +
> + return regmap_write(regmap, W83773_OFFSET_LSB[index], low_byte);
> +}
> +
> +static int get_update_interval(struct regmap *regmap, long *val)
> +{
> + unsigned int regval;
> + int ret;
> +
> + ret = regmap_read(regmap, W83773_CONVERSION_RATE_REG_READ, &regval);
> + if (ret < 0)
> + return ret;
> +
> + *val = 16000 >> regval;
> + return 0;
> +}
> +
> +static int set_update_interval(struct regmap *regmap, long val)
> +{
> + int rate;
> +
> + /*
> + * For valid rates, interval can be calculated as
> + * interval = (1 << (8 - rate)) * 62.5;
> + * Rounded rate is therefore
> + * rate = 8 - __fls(interval * 8 / (62.5 * 7));
> + * Use clamp_val() to avoid overflows, and to ensure valid input
> + * for __fls.
> + */
> + val = clamp_val(val, 62, 16000) * 10;
> + rate = 8 - __fls((val * 8 / (625 * 7)));
> + return regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, rate);
> +}
> +
> +static int w83773_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct regmap *regmap = dev_get_drvdata(dev);
> +
> + if (type == hwmon_chip) {
> + if (attr == hwmon_chip_update_interval)
> + return get_update_interval(regmap, val);
> + return -EOPNOTSUPP;
> + }
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + if (channel == 0)
> + return get_local_temp(regmap, val);
> + return get_remote_temp(regmap, channel - 1, val);
> + case hwmon_temp_fault:
> + return get_fault(regmap, channel - 1, val);
> + case hwmon_temp_offset:
> + return get_offset(regmap, channel - 1, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int w83773_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + struct regmap *regmap = dev_get_drvdata(dev);
> +
> + if (type == hwmon_chip && attr == hwmon_chip_update_interval)
> + return set_update_interval(regmap, val);
> +
> + if (type == hwmon_temp && attr == hwmon_temp_offset)
> + return set_offset(regmap, channel - 1, val);
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static umode_t w83773_is_visible(const void *data, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + switch (type) {
> + case hwmon_chip:
> + switch (attr) {
> + case hwmon_chip_update_interval:
> + return 0644;
> + }
> + break;
> + case hwmon_temp:
> + switch (attr) {
> + case hwmon_temp_input:
> + case hwmon_temp_fault:
> + return 0444;
> + case hwmon_temp_offset:
> + return 0644;
> + }
> + break;
> + default:
> + break;
> + }
> + return 0;
> +}
> +
> +static const u32 w83773_chip_config[] = {
> + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL,
> + 0
> +};
> +
> +static const struct hwmon_channel_info w83773_chip = {
> + .type = hwmon_chip,
> + .config = w83773_chip_config,
> +};
> +
> +static const u32 w83773_temp_config[] = {
> + HWMON_T_INPUT,
> + HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET,
> + HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET,
> + 0
> +};
> +
> +static const struct hwmon_channel_info w83773_temp = {
> + .type = hwmon_temp,
> + .config = w83773_temp_config,
> +};
> +
> +static const struct hwmon_channel_info *w83773_info[] = {
> + &w83773_chip,
> + &w83773_temp,
> + NULL
> +};
> +
> +static const struct hwmon_ops w83773_ops = {
> + .is_visible = w83773_is_visible,
> + .read = w83773_read,
> + .write = w83773_write,
> +};
> +
> +static const struct hwmon_chip_info w83773_chip_info = {
> + .ops = &w83773_ops,
> + .info = w83773_info,
> +};
> +
> +static const struct regmap_config w83773_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static int w83773_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct device *hwmon_dev;
> + struct regmap *regmap;
> + int ret;
> +
> + regmap = devm_regmap_init_i2c(client, &w83773_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(dev, "failed to allocate register map\n");
> + return PTR_ERR(regmap);
> + }
> +
> + /* Set the conversion rate to 2 Hz */
> + ret = regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, 0x05);
> + if (ret < 0) {
> + dev_err(&client->dev, "error writing config rate register\n");
> + return ret;
> + }
> +
> + i2c_set_clientdata(client, regmap);
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(dev,
> + client->name,
> + regmap,
> + &w83773_chip_info,
> + NULL);
> + return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static struct i2c_driver w83773_driver = {
> + .class = I2C_CLASS_HWMON,
> + .driver = {
> + .name = "w83773g",
> + .of_match_table = of_match_ptr(w83773_of_match),
> + },
> + .probe = w83773_probe,
> + .id_table = w83773_id,
> +};
> +
> +module_i2c_driver(w83773_driver);
> +
> +MODULE_AUTHOR("Lei YU <mine260309@gmail.com>");
> +MODULE_DESCRIPTION("W83773G temperature sensor driver");
> +MODULE_LICENSE("GPL");

\
 
 \ /
  Last update: 2017-11-18 17:16    [W:0.142 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site