lkml.org 
[lkml]   [2017]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v18 5/6] vfio: ABI for mdev display dma-buf operation

Kirti?

On Wed, 15 Nov 2017 21:11:42 -0700
Alex Williamson <alex.williamson@redhat.com> wrote:

> On Thu, 16 Nov 2017 11:21:56 +0800
> Zhenyu Wang <zhenyuw@linux.intel.com> wrote:
>
> > On 2017.11.15 11:48:42 -0700, Alex Williamson wrote:
> > > On Wed, 15 Nov 2017 17:11:54 +0800
> > > Tina Zhang <tina.zhang@intel.com> wrote:
> > >
> > > > Add VFIO_DEVICE_QUERY_GFX_PLANE ioctl command to let user query and get
> > > > a plane and its information. So far, two types of buffers are supported:
> > > > buffers based on dma-buf and buffers based on region.
> > > >
> > > > This ioctl can be invoked with:
> > > > 1) Either DMABUF or REGION flag. Vendor driver returns a plane_info
> > > > successfully only when the specific kind of buffer is supported.
> > > > 2) Flag PROBE. And at the same time either DMABUF or REGION must be set,
> > > > so that vendor driver returns success only when the specific kind of
> > > > buffer is supported.
> > > >
> > > > Add VFIO_DEVICE_GET_GFX_DMABUF ioctl command to let user get a specific
> > > > dma-buf fd of an exposed MDEV buffer provided by dmabuf_id which was
> > > > returned in VFIO_DEVICE_QUERY_GFX_PLANE ioctl command.
> > > >
> > > > The life cycle of an exposed MDEV buffer is handled by userspace and
> > > > tracked by kernel space. The returned dmabuf_id in struct vfio_device_
> > > > query_gfx_plane can be a new id of a new exposed buffer or an old id of
> > > > a re-exported buffer. Host user can check the value of dmabuf_id to see
> > > > if it needs to create new resources according to the new exposed buffer
> > > > or just re-use the existing resource related to the old buffer.
> > > >
> > > > v18:
> > > > - update comments for VFIO_DEVICE_GET_GFX_DMABUF. (Alex)
> > > >
> > > > v17:
> > > > - modify VFIO_DEVICE_GET_GFX_DMABUF interface. (Alex)
> > > >
> > > > v16:
> > > > - add x_hot and y_hot fields. (Gerd)
> > > > - add comments for VFIO_DEVICE_GET_GFX_DMABUF. (Alex)
> > > > - rebase to 4.14.0-rc6.
> > > >
> > > > v15:
> > > > - add a ioctl to get a dmabuf for a given dmabuf id. (Gerd)
> > > >
> > > > v14:
> > > > - add PROBE, DMABUF and REGION flags. (Alex)
> > > >
> > > > v12:
> > > > - add drm_format_mod back. (Gerd and Zhenyu)
> > > > - add region_index. (Gerd)
> > > >
> > > > v11:
> > > > - rename plane_type to drm_plane_type. (Gerd)
> > > > - move fields of vfio_device_query_gfx_plane to vfio_device_gfx_plane_info.
> > > > (Gerd)
> > > > - remove drm_format_mod, start fields. (Daniel)
> > > > - remove plane_id.
> > > >
> > > > v10:
> > > > - refine the ABI API VFIO_DEVICE_QUERY_GFX_PLANE. (Alex) (Gerd)
> > > >
> > > > v3:
> > > > - add a field gvt_plane_info in the drm_i915_gem_obj structure to save
> > > > the decoded plane information to avoid look up while need the plane
> > > > info. (Gerd)
> > > >
> > > > Signed-off-by: Tina Zhang <tina.zhang@intel.com>
> > > > Cc: Gerd Hoffmann <kraxel@redhat.com>
> > > > Cc: Alex Williamson <alex.williamson@redhat.com>
> > > > Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> > > > ---
> > > > include/uapi/linux/vfio.h | 62 +++++++++++++++++++++++++++++++++++++++++++++++
> > > > 1 file changed, 62 insertions(+)
> > > >
> > > > diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> > > > index ae46105..5c1cca2 100644
> > > > --- a/include/uapi/linux/vfio.h
> > > > +++ b/include/uapi/linux/vfio.h
> > > > @@ -502,6 +502,68 @@ struct vfio_pci_hot_reset {
> > > >
> > > > #define VFIO_DEVICE_PCI_HOT_RESET _IO(VFIO_TYPE, VFIO_BASE + 13)
> > > >
> > > > +/**
> > > > + * VFIO_DEVICE_QUERY_GFX_PLANE - _IOW(VFIO_TYPE, VFIO_BASE + 14,
> > > > + * struct vfio_device_query_gfx_plane)
> > > > + *
> > > > + * Set the drm_plane_type and flags, then retrieve the gfx plane info.
> > > > + *
> > > > + * flags supported:
> > > > + * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_DMABUF are set
> > > > + * to ask if the mdev supports dma-buf. 0 on support, -EINVAL on no
> > > > + * support for dma-buf.
> > > > + * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_REGION are set
> > > > + * to ask if the mdev supports region. 0 on support, -EINVAL on no
> > > > + * support for region.
> > > > + * - VFIO_GFX_PLANE_TYPE_DMABUF or VFIO_GFX_PLANE_TYPE_REGION is set
> > > > + * with each call to query the plane info.
> > > > + * - Others are invalid and return -EINVAL.
> > > > + *
> > > > + * Note:
> > > > + * 1. Plane could be disabled by guest. In that case, success will be
> > > > + * returned with zero-initialized drm_format, size, width and height
> > > > + * fields.
> > > > + * 2. x_hot/y_hot is set to 0xFFFFFFFF if no hotspot information available
> > > > + *
> > > > + * Return: 0 on success, -errno on other failure.
> > > > + */
> > > > +struct vfio_device_gfx_plane_info {
> > > > + __u32 argsz;
> > > > + __u32 flags;
> > > > +#define VFIO_GFX_PLANE_TYPE_PROBE (1 << 0)
> > > > +#define VFIO_GFX_PLANE_TYPE_DMABUF (1 << 1)
> > > > +#define VFIO_GFX_PLANE_TYPE_REGION (1 << 2)
> > > > + /* in */
> > > > + __u32 drm_plane_type; /* type of plane: DRM_PLANE_TYPE_* */
> > > > + /* out */
> > > > + __u32 drm_format; /* drm format of plane */
> > > > + __u64 drm_format_mod; /* tiled mode */
> > > > + __u32 width; /* width of plane */
> > > > + __u32 height; /* height of plane */
> > > > + __u32 stride; /* stride of plane */
> > > > + __u32 size; /* size of plane in bytes, align on page*/
> > > > + __u32 x_pos; /* horizontal position of cursor plane */
> > > > + __u32 y_pos; /* vertical position of cursor plane*/
> > > > + __u32 x_hot; /* horizontal position of cursor hotspot */
> > > > + __u32 y_hot; /* vertical position of cursor hotspot */
> > > > + union {
> > > > + __u32 region_index; /* region index */
> > > > + __u32 dmabuf_id; /* dma-buf id */
> > > > + };
> > > > +};
> > > > +
> > > > +#define VFIO_DEVICE_QUERY_GFX_PLANE _IO(VFIO_TYPE, VFIO_BASE + 14)
> > > > +
> > > > +/**
> > > > + * VFIO_DEVICE_GET_GFX_DMABUF - _IOW(VFIO_TYPE, VFIO_BASE + 15, __u32)
> > > > + *
> > > > + * Return a new dma-buf file descriptor for an exposed guest framebuffer
> > > > + * described by the provided dmabuf_id. The dmabuf_id is returned from VFIO_
> > > > + * DEVICE_QUERY_GFX_PLANE as a token of the exposed guest framebuffer.
> > > > + */
> > > > +
> > > > +#define VFIO_DEVICE_GET_GFX_DMABUF _IO(VFIO_TYPE, VFIO_BASE + 15)
> > > > +
> > > > /* -------- API for Type1 VFIO IOMMU -------- */
> > > >
> > > > /**
> > >
> > > Looks good to me. Kirti, have you had a chance yet to verify this is
> > > sufficient for your region-based approach? It would be great to get
> > > confirmation of that ASAP so we can get this in. Thanks,
> > >
> >
> > Alex, do you mind by merging this just through gvt tree? Or you would
> > like to merge this then send pull request for us then we can apply left?
>
> I'm fine with this going through the gvt tree, but I want some
> confirmation from nvidia that this meets their needs as well before I
> provide an ack. Thanks,
>
> Alex

\
 
 \ /
  Last update: 2017-11-18 16:31    [W:0.048 / U:6.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site