lkml.org 
[lkml]   [2017]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC v5 07/11] [media] vb2: add in-fence support to QBUF
2017-11-17 Gustavo Padovan <gustavo@padovan.org>:

> 2017-11-17 Hans Verkuil <hverkuil@xs4all.nl>:
>
> > On 15/11/17 18:10, Gustavo Padovan wrote:
> > > From: Gustavo Padovan <gustavo.padovan@collabora.com>
> > >
> > > Receive in-fence from userspace and add support for waiting on them
> > > before queueing the buffer to the driver. Buffers can't be queued to the
> > > driver before its fences signal. And a buffer can't be queue to the driver
> > > out of the order they were queued from userspace. That means that even if
> > > it fence signal it must wait all other buffers, ahead of it in the queue,
> > > to signal first.
> > >
> > > To make that possible we use fence_array to keep that ordering. Basically
> > > we create a fence_array that contains both the current fence and the fence
> > > from the previous buffer (which might be a fence array as well). The base
> > > fence class for the fence_array becomes the new buffer fence, waiting on
> > > that one guarantees that it won't be queued out of order.
> > >
> > > v6:
> > > - With fences always keep the order userspace queues the buffers.
> > > - Protect in_fence manipulation with a lock (Brian Starkey)
> > > - check if fences have the same context before adding a fence array
> > > - Fix last_fence ref unbalance in __set_in_fence() (Brian Starkey)
> > > - Clean up fence if __set_in_fence() fails (Brian Starkey)
> > > - treat -EINVAL from dma_fence_add_callback() (Brian Starkey)
> > >
> > > v5: - use fence_array to keep buffers ordered in vb2 core when
> > > needed (Brian Starkey)
> > > - keep backward compat on the reserved2 field (Brian Starkey)
> > > - protect fence callback removal with lock (Brian Starkey)
> > >
> > > v4:
> > > - Add a comment about dma_fence_add_callback() not returning a
> > > error (Hans)
> > > - Call dma_fence_put(vb->in_fence) if fence signaled (Hans)
> > > - select SYNC_FILE under config VIDEOBUF2_CORE (Hans)
> > > - Move dma_fence_is_signaled() check to __enqueue_in_driver() (Hans)
> > > - Remove list_for_each_entry() in __vb2_core_qbuf() (Hans)
> > > - Remove if (vb->state != VB2_BUF_STATE_QUEUED) from
> > > vb2_start_streaming() (Hans)
> > > - set IN_FENCE flags on __fill_v4l2_buffer (Hans)
> > > - Queue buffers to the driver as soon as they are ready (Hans)
> > > - call fill_user_buffer() after queuing the buffer (Hans)
> > > - add err: label to clean up fence
> > > - add dma_fence_wait() before calling vb2_start_streaming()
> > >
> > > v3: - document fence parameter
> > > - remove ternary if at vb2_qbuf() return (Mauro)
> > > - do not change if conditions behaviour (Mauro)
> > >
> > > v2:
> > > - fix vb2_queue_or_prepare_buf() ret check
> > > - remove check for VB2_MEMORY_DMABUF only (Javier)
> > > - check num of ready buffers to start streaming
> > > - when queueing, start from the first ready buffer
> > > - handle queue cancel
> > >
> > > Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
> > > ---
> > > drivers/media/v4l2-core/Kconfig | 1 +
> > > drivers/media/v4l2-core/videobuf2-core.c | 202 ++++++++++++++++++++++++++++---
> > > drivers/media/v4l2-core/videobuf2-v4l2.c | 29 ++++-
> > > include/media/videobuf2-core.h | 17 ++-
> > > 4 files changed, 231 insertions(+), 18 deletions(-)
> > >
> > > diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig
> > > index a35c33686abf..3f988c407c80 100644
> > > --- a/drivers/media/v4l2-core/Kconfig
> > > +++ b/drivers/media/v4l2-core/Kconfig
> > > @@ -83,6 +83,7 @@ config VIDEOBUF_DVB
> > > # Used by drivers that need Videobuf2 modules
> > > config VIDEOBUF2_CORE
> > > select DMA_SHARED_BUFFER
> > > + select SYNC_FILE
> > > tristate
> > >
> > > config VIDEOBUF2_MEMOPS
> > > diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
> > > index 60f8b582396a..26de4c80717d 100644
> > > --- a/drivers/media/v4l2-core/videobuf2-core.c
> > > +++ b/drivers/media/v4l2-core/videobuf2-core.c
> > > @@ -23,6 +23,7 @@
> > > #include <linux/sched.h>
> > > #include <linux/freezer.h>
> > > #include <linux/kthread.h>
> > > +#include <linux/dma-fence-array.h>
> > >
> > > #include <media/videobuf2-core.h>
> > > #include <media/v4l2-mc.h>
> > > @@ -346,6 +347,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
> > > vb->index = q->num_buffers + buffer;
> > > vb->type = q->type;
> > > vb->memory = memory;
> > > + spin_lock_init(&vb->fence_cb_lock);
> > > for (plane = 0; plane < num_planes; ++plane) {
> > > vb->planes[plane].length = plane_sizes[plane];
> > > vb->planes[plane].min_length = plane_sizes[plane];
> > > @@ -1222,6 +1224,9 @@ static void __enqueue_in_driver(struct vb2_buffer *vb)
> > > {
> > > struct vb2_queue *q = vb->vb2_queue;
> > >
> > > + if (vb->in_fence && !dma_fence_is_signaled(vb->in_fence))
> > > + return;
> > > +
> > > vb->state = VB2_BUF_STATE_ACTIVE;
> > > atomic_inc(&q->owned_by_drv_count);
> > >
> > > @@ -1273,6 +1278,23 @@ static int __buf_prepare(struct vb2_buffer *vb, const void *pb)
> > > return 0;
> > > }
> > >
> > > +static int __get_num_ready_buffers(struct vb2_queue *q)
> > > +{
> > > + struct vb2_buffer *vb;
> > > + int ready_count = 0;
> > > + unsigned long flags;
> > > +
> > > + /* count num of buffers ready in front of the queued_list */
> > > + list_for_each_entry(vb, &q->queued_list, queued_entry) {
> > > + spin_lock_irqsave(&vb->fence_cb_lock, flags);
> > > + if (!vb->in_fence || dma_fence_is_signaled(vb->in_fence))
> > > + ready_count++;
> >
> > Shouldn't there be a:
> >
> > else
> > break;
> >
> > here? You're counting the number of available (i.e. no fence or signaled
> > fence) buffers at the start of the queued buffer list.
>
> Sure.

Actually, by using the fence_array machinery the fence won't be
signaling out of order, so the 'else break' isn't strictly necessary
here.

Gustavo

\
 
 \ /
  Last update: 2017-11-17 18:50    [W:0.092 / U:0.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site