lkml.org 
[lkml]   [2017]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: intel-gpio interrupts stop firing with Focaltech I2C-HID touchpad
On Fri, Nov 17, 2017 at 06:01:27PM +0800, Chris Chiu wrote:
> Hi Mika,
> Here's the full dmesg log you need. The touchpad stop reporting at
> the last of the log.
> https://gist.github.com/mschiu77/a0b8d24a586a228c55eca30c87c71d41

Thanks!

I did not spot anything suspicious in the i2c-hid initialization. When
the issue happens, can you check what the pin state is and if it changes
when you use the touchpad? If I read your ACPI tables right, something
like this:

# grep GPIO_18 /sys/kernel/debug/pinctrl/INT3452:00/pins

(it could be another INT3452:* device as well).

The GPIO line should be high and when the touchpad is pressed it should
go low.

Then another thing, if you unload i2c-hid and load it back, does it
start working again?

# modprobe -r i2c-hid
# modprobe i2c-hid

\
 
 \ /
  Last update: 2017-11-17 17:19    [W:0.047 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site