lkml.org 
[lkml]   [2017]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: intel-gpio interrupts stop firing with Focaltech I2C-HID touchpad
On Fri, Nov 17, 2017 at 5:13 PM, Chris Chiu <chiu@endlessm.com> wrote:
> On Fri, Nov 17, 2017 at 5:11 PM, Mika Westerberg
> <mika.westerberg@linux.intel.com> wrote:
>> On Fri, Nov 17, 2017 at 04:27:39PM +0800, Chris Chiu wrote:
>>> On Thu, Nov 16, 2017 at 9:07 PM, Mika Westerberg
>>> <mika.westerberg@linux.intel.com> wrote:
>>> > On Thu, Nov 16, 2017 at 12:01:24PM +0000, Daniel Drake wrote:
>>> >> On Thu, Nov 16, 2017 at 11:52 AM, Mika Westerberg
>>> >> <mika.westerberg@linux.intel.com> wrote:
>>> >> > Please first check the signal with some analyzator if it works as
>>> >> > expected and let's then figure out what needs to be fixed and where ;-)
>>> >>
>>> >> It works fine under Windows, so I think it's already clear that there
>>> >> is a Linux bug to be solved here.
>>> >
>>> > Can you remove all the "debugging" patches and hacks and then add
>>> > "i2c_hid.debug=1" to the kernel command line.
>>> >
>>> > Then reproduce the issue and send me full dmesg and acpidump of the
>>> > system. Thanks.
>>>
>>> Hi Mika,
>>> Here's the dmesg log which stops at 214th seconds and no more
>>> further output and archive of "acpidump -b" output files FYI.
>>
>> Thanks!
>>
>> The dmesg is not complete, I wonder if you can make the buffer a bit
>> bigger by increasing CONFIG_LOG_BUF_SHIFT (or get it from
>> /var/log/messages or so). I would like to see i2c-hid init and related
>> messages.
>>
>> From the acpidump related to the i2c-hid device, the system provides
>> custom I2C timings via FMCN ACPI method but it misses one value
>> (sda_hold). Not sure if if has anything to do with the problem, though.
>> Adding Jarkko in case he has any ideas.
>>
>> BTW, is this the same machine which has problems in S3 suspend/resume?
>
> Hi Mika,
> Yes. This machine has the problem in S3 suspend/resume, too.
>
> Chris

Hi Mika,
Here's the full dmesg log you need. The touchpad stop reporting at
the last of the log.
https://gist.github.com/mschiu77/a0b8d24a586a228c55eca30c87c71d41

Chris

\
 
 \ /
  Last update: 2017-11-17 17:19    [W:0.078 / U:4.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site