lkml.org 
[lkml]   [2017]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] acpi/x86: Reuse the mp_register_ioapic_irq() in the function mp_override_legacy_irq()
Date
Modify the function mp_override_legacy_irq() to reuse the newly introduced
function mp_register_ioapic_irq().

Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
---
arch/x86/kernel/acpi/boot.c | 27 +++++----------------------
1 file changed, 5 insertions(+), 22 deletions(-)

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 40c24d1b..6aae067 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -342,13 +342,12 @@ static int acpi_register_lapic(int id, u32 acpiid, u8 enabled)
#ifdef CONFIG_X86_IO_APIC
#define MP_ISA_BUS 0

+static int __init mp_register_ioapic_irq(u8 bus_irq, u8 polarity,
+ u8 trigger, u32 gsi);
+
static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
u32 gsi)
{
- int ioapic;
- int pin;
- struct mpc_intsrc mp_irq;
-
/*
* Check bus_irq boundary.
*/
@@ -358,14 +357,6 @@ static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
}

/*
- * Convert 'gsi' to 'ioapic.pin'.
- */
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0)
- return;
- pin = mp_find_ioapic_pin(ioapic, gsi);
-
- /*
* TBD: This check is for faulty timer entries, where the override
* erroneously sets the trigger to level, resulting in a HUGE
* increase of timer interrupts!
@@ -373,16 +364,8 @@ static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
if ((bus_irq == 0) && (trigger == 3))
trigger = 1;

- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (trigger << 2) | polarity;
- mp_irq.srcbus = MP_ISA_BUS;
- mp_irq.srcbusirq = bus_irq; /* IRQ */
- mp_irq.dstapic = mpc_ioapic_id(ioapic); /* APIC ID */
- mp_irq.dstirq = pin; /* INTIN# */
-
- mp_save_irq(&mp_irq);
-
+ if (mp_register_ioapic_irq(bus_irq, polarity, trigger, gsi) < 0)
+ return;
/*
* Reset default identity mapping if gsi is also an legacy IRQ,
* otherwise there will be more than one entry with the same GSI
--
1.9.1
\
 
 \ /
  Last update: 2017-11-16 10:57    [W:0.082 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site