lkml.org 
[lkml]   [2017]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] leds: lm3692x: Introduce LM3692x dual string driver
On Mon 2017-11-13 14:50:52, Dan Murphy wrote:
> Introducing the LM3692x Dual-String white LED driver.
>
> Data sheet is located
> http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> drivers/leds/leds-lm3692x.c | 380 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 380 insertions(+)
> create mode 100644 drivers/leds/leds-lm3692x.c
>
> diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
> new file mode 100644
> index 000000000000..beb753abc7b0
> --- /dev/null
> +++ b/drivers/leds/leds-lm3692x.c
> @@ -0,0 +1,380 @@
> +/*
> + * TI lm3692x LED Driver
> + *
> + * Copyright (C) 2017 Texas Instruments
> + *
> + * Author: Dan Murphy <dmurphy@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + */

I'd put data sheet link here.

> +/**
> + * struct lm3692x_led -
> + * @lock - Lock for reading/writing the device
> + * @client - Pointer to the I2C client
> + * @led_dev - led class device pointer
> + * @regmap - Devices register map
> + * @enable_gpio - VDDIO/EN gpio to enable communication interface
> + * @regulator - LED supply regulator pointer
> + * @label - LED label
> + **/

Are you sure this is linuxdoc? Would */ at the end be enough?

> +static int lm3692x_fault_check(struct lm3692x_led *led)
> +{
> + int ret, fault;
> + unsigned int read_buf;
> +
> + ret = regmap_read(led->regmap, LM3692X_FAULT_FLAGS, &read_buf);
> + if (ret)
> + goto out;

Just return here.

> + /*
> + * For glitch free operation, the following data should
> + * only be written while device enable bit is 0
> + * Per Section 7.5.14 of the data sheet
> + */

"per section 7.5.14 of the data sheet."

> + ret = regmap_write(led->regmap, LM3692X_PWM_CTRL,
> + LM3692X_PWM_FILTER_100 | LM3692X_PWM_SAMP_24MHZ);
> + if (ret)
> + dev_err(&led->client->dev, "Failed programming PWM CTRL\n");
> +
> + ret = regmap_write(led->regmap, LM3692X_BOOST_CTRL,
> + LM3692X_BRHT_MODE_RAMP_MULTI |
> + LM3692X_BL_ADJ_POL |
> + LM3692X_RAMP_RATE_250us);
> + if (ret)
> + dev_err(&led->client->dev, "Failed programming BOOST CTRL\n");
> +
> + ret = regmap_write(led->regmap, LM3692X_AUTO_FREQ_HI, 0x00);
> + if (ret)
> + dev_err(&led->client->dev, "Failed programming AUTO HI FREQ\n");

If something fails, is it wise to continue?

Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-11-15 11:46    [W:0.079 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site