lkml.org 
[lkml]   [2017]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/5] uio: dt-bindings: document existing binding for uio-pdrv-genirq
Date
Document the device tree bindings for the uio-prv-genirq driver. Provide
some examples on how it can be used.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Changes in v3:
- New. Document existing binding first.

.../devicetree/bindings/uio/uio-pdrv-genirq.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt

diff --git a/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt b/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt
new file mode 100644
index 000000000000..5a92b1f8825f
--- /dev/null
+++ b/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt
@@ -0,0 +1,27 @@
+*Generic UIO platform driver with interrupts
+
+Required properties:
+- compatible: Should be a value set with the of_id module parameter.
+
+Optional properties:
+- interrupts: Should contain the interrupt to be associated with this device
+ (only a single interrupt is supported per device).
+- interrupt-parent: Specifies the phandle to the parent interrupt controller.
+- reg: Should specify the physical address spaces used by this device.
+
+Example:
+
+/* Device with MM IO and interrupt assuming of_id="me,my-device" */
+my-device@10000 {
+ compatible = "me,my-device";
+ reg = <0x10000 0x40>;
+ interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-parent = <&gic>;
+};
+
+/* Device with interrupt only assuming of_id="me,my-device" */
+my-int {
+ compatible = "me,my-device";
+ interrupts = <6 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-parent = <&gic>;
+};
--
2.14.2
\
 
 \ /
  Last update: 2017-10-10 00:48    [W:0.072 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site