Messages in this thread | | | Subject | Re: [PATCH 2/2] pinctrl: rockchip: Fix the correct routing config for the gmac-m1 pins of rmii and rgmii | From | "David.Wu" <> | Date | Mon, 9 Oct 2017 09:21:22 +0800 |
| |
Hi Linus,
Thanks for you adding it. I left the office for a few days due to holiday.
在 2017/10/7 18:32, Linus Walleij 写道: > On Sat, Sep 30, 2017 at 5:07 PM, Heiko Stuebner <heiko@sntech.de> wrote: >> Am Samstag, 30. September 2017, 20:13:21 CEST schrieb David Wu: >>> If the gmac-m1 optimization(bit10) is selected, the gpio function >>> of gmac pins is not valid. We may use the rmii mode for gmac interface, >>> the pins such as rx_d2, rx_d3, which the rgmii mode used, but rmii not >>> used could be taken as gpio function. So gmac_rxd0m1 selects the bit2, >>> and gmac_rxd0m3 select bit10 is more correct. >>> >>> Signed-off-by: David Wu <david.wu@rock-chips.com> >> >> the patch subject should mention the the rk3328 whose routing gets fixed >> (like adding a simple "on rk3328" to it), otherwise >> >> Reviewed-by: Heiko Stuebner <heiko@sntech.de> > > I added rk3328 to it, also assumed this Reviewed-by covers patch 1/2 > as well and applied both with your tag. > > Yours, > Linus Walleij > > >
| |