lkml.org 
[lkml]   [2017]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] media: ov7740: Document device tree bindings
Date
Add the device tree binding documentation for ov7740 driver and
add a new entry of ov7740 to the MAINTAINERS file.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---

Changes in v2:
- Split off the bindings into a separate patch.
- Add a new entry to the MAINTAINERS file.

.../devicetree/bindings/media/i2c/ov7740.txt | 43 ++++++++++++++++++++++
MAINTAINERS | 8 ++++
2 files changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7740.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/ov7740.txt b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
new file mode 100644
index 000000000000..b306e5aa97bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
@@ -0,0 +1,43 @@
+* Omnivision OV7740 CMOS image sensor
+
+The Omnivision OV7740 image sensor supports multiple output image
+size, such as VGA, and QVGA, CIF and any size smaller. It also
+supports the RAW RGB and YUV output formats.
+
+Required Properties:
+- compatible: should be "ovti,ov7740"
+- clocks: reference to the xvclk input clock.
+- clock-names: should be "xvclk".
+
+Optional Properties:
+- reset-gpios: reference to the GPIO connected to the reset_b pin,
+ if any. Active low with pull-ip resistor.
+- powerdown-gpios: reference to the GPIO connected to the pwdn pin,
+ if any. Active high with pull-down resistor.
+
+The device node must contain one 'port' child node for its digital
+output video port, in accordance with the video interface bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+ i2c1: i2c@fc028000 {
+ ov7740: camera@21 {
+ compatible = "ovti,ov7740";
+ reg = <0x21>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>;
+ clocks = <&isc>;
+ clock-names = "xvclk";
+ assigned-clocks = <&isc>;
+ assigned-clock-rates = <24000000>;
+ reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>;
+
+ port {
+ ov7740_0: endpoint {
+ remote-endpoint = <&isc_0>;
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 90230fe020f3..f0f3f121d1d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9965,6 +9965,14 @@ S: Maintained
F: drivers/media/i2c/ov7670.c
F: Documentation/devicetree/bindings/media/i2c/ov7670.txt

+OMNIVISION OV7740 SENSOR DRIVER
+M: Wenyou Yang <wenyou.yang@microchip.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/ov7740.c
+F: Documentation/devicetree/bindings/media/i2c/ov7740.txt
+
ONENAND FLASH DRIVER
M: Kyungmin Park <kyungmin.park@samsung.com>
L: linux-mtd@lists.infradead.org
--
2.13.0
\
 
 \ /
  Last update: 2017-10-28 20:16    [W:1.266 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site