Messages in this thread | | | Date | Fri, 27 Oct 2017 17:12:20 +0200 | From | Maxime Ripard <> | Subject | Re: [PATCH v9 04/10] arm: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac |
| |
Hi,
The prefix should be ARM, uppercase.
On Tue, Oct 24, 2017 at 07:57:08PM +0200, Corentin Labbe wrote: > Since dwmac-sun8i could use either an integrated PHY or an external PHY > (which could be at same MDIO address), we need to represent this selection > by a MDIO switch. > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > --- > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 32 +++++++++++++++++++++++++++----- > 1 file changed, 27 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi > index d762098fc589..0e97df490aba 100644 > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi > @@ -422,14 +422,36 @@ > #size-cells = <0>; > status = "disabled"; > > - mdio: mdio { > + mdio0: mdio { > #address-cells = <1>; > #size-cells = <0>; > - int_mii_phy: ethernet-phy@1 { > - compatible = "ethernet-phy-ieee802.3-c22"; > + compatible = "snps,dwmac-mdio"; > + }; > + > + mdio-mux { > + compatible = "allwinner,sun8i-h3-mdio-mux"; > + #address-cells = <1>; > + #size-cells = <0>; > + mdio-parent-bus = <&mdio0>;
And you should have a line here.
Thanks! Maxime
-- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com [unhandled content-type:application/pgp-signature] | |