lkml.org 
[lkml]   [2017]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] serial: 8250: Convert timers to use timer_setup()
From
Date
On Tue, 2017-10-24 at 02:59 -0700, Kees Cook wrote:
> In preparation for unconditionally passing the struct timer_list
> pointer to
> all timer callbacks, switch to using the new timer_setup() and
> from_timer()
> to pass the timer pointer explicitly.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Jiri Slaby <jslaby@suse.com>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Vignesh R <vigneshr@ti.com>
> Cc: Ed Blake <ed.blake@imgtec.com>
> Cc: Matthias Brugger <mbrugger@suse.com>
> Cc: Sean Young <sean@mess.org>
> Cc: linux-serial@vger.kernel.org
> Signed-off-by: Kees Cook <keescook@chromium.org>
> ---
> drivers/tty/serial/8250/8250_core.c | 16 +++++++---------
> 1 file changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_core.c
> b/drivers/tty/serial/8250/8250_core.c
> index 00d4b114f1bf..ccfc42ca846d 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -262,17 +262,17 @@ static void serial_unlink_irq_chain(struct
> uart_8250_port *up)
> * barely passable results for a 16550A. (Although at the expense
> * of much CPU overhead).
> */
> -static void serial8250_timeout(unsigned long data)
> +static void serial8250_timeout(struct timer_list *t)
> {
> - struct uart_8250_port *up = (struct uart_8250_port *)data;
> + struct uart_8250_port *up = from_timer(up, t, timer);
>
> up->port.handle_irq(&up->port);
> mod_timer(&up->timer, jiffies + uart_poll_timeout(&up-
> >port));
> }
>
> -static void serial8250_backup_timeout(unsigned long data)
> +static void serial8250_backup_timeout(struct timer_list *t)
> {
> - struct uart_8250_port *up = (struct uart_8250_port *)data;
> + struct uart_8250_port *up = from_timer(up, t, timer);
> unsigned int iir, ier = 0, lsr;
> unsigned long flags;
>
> @@ -329,8 +329,7 @@ static int univ8250_setup_irq(struct
> uart_8250_port *up)
> if (up->bugs & UART_BUG_THRE) {
> pr_debug("ttyS%d - using backup timer\n",
> serial_index(port));
>
> - up->timer.function = serial8250_backup_timeout;
> - up->timer.data = (unsigned long)up;
> + up->timer.function =
> (TIMER_FUNC_TYPE)serial8250_backup_timeout;
> mod_timer(&up->timer, jiffies +
> uart_poll_timeout(port) + HZ / 5);
> }
> @@ -341,7 +340,6 @@ static int univ8250_setup_irq(struct
> uart_8250_port *up)
> * driver used to do this with IRQ0.
> */
> if (!port->irq) {
> - up->timer.data = (unsigned long)up;
> mod_timer(&up->timer, jiffies +
> uart_poll_timeout(port));
> } else
> retval = serial_link_irq_chain(up);
> @@ -354,7 +352,7 @@ static void univ8250_release_irq(struct
> uart_8250_port *up)
> struct uart_port *port = &up->port;
>
> del_timer_sync(&up->timer);
> - up->timer.function = serial8250_timeout;
> + up->timer.function = (TIMER_FUNC_TYPE)serial8250_timeout;
> if (port->irq)
> serial_unlink_irq_chain(up);
> }
> @@ -525,7 +523,7 @@ static void __init serial8250_isa_init_ports(void)
> base_ops = port->ops;
> port->ops = &univ8250_port_ops;
>
> - setup_timer(&up->timer, serial8250_timeout, 0UL);
> + timer_setup(&up->timer, serial8250_timeout, 0);
>
> up->ops = &univ8250_driver_ops;
>
> --
> 2.7.4
>
>

--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

\
 
 \ /
  Last update: 2017-10-26 18:22    [W:0.037 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site