lkml.org 
[lkml]   [2017]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon/amc6821: Use common error handling code in amc6821_init_client()
Date
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Tue, 24 Oct 2017 22:04:20 +0200

* Add two jump targets so that a bit of exception handling can be better
reused at the end of this function.

This issue was detected by using the Coccinelle software.

* Delete the local variable "err" which became unnecessary
with this refactoring.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/hwmon/amc6821.c | 77 ++++++++++++++++++-------------------------------
1 file changed, 28 insertions(+), 49 deletions(-)

diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 46b4e35fd555..5c067de3fdcf 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -885,70 +885,42 @@ static int amc6821_detect(
static int amc6821_init_client(struct i2c_client *client)
{
int config;
- int err = -EIO;

if (init) {
config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
-
- if (config < 0) {
- dev_err(&client->dev,
- "Error reading configuration register, aborting.\n");
- return err;
- }
+ if (config < 0)
+ goto report_read_failure;

config |= AMC6821_CONF4_MODE;
-
if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4,
- config)) {
- dev_err(&client->dev,
- "Configuration register write error, aborting.\n");
- return err;
- }
+ config))
+ goto report_write_failure;

config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3);
-
- if (config < 0) {
- dev_err(&client->dev,
- "Error reading configuration register, aborting.\n");
- return err;
- }
+ if (config < 0)
+ goto report_read_failure;

dev_info(&client->dev, "Revision %d\n", config & 0x0f);

config &= ~AMC6821_CONF3_THERM_FAN_EN;
-
if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3,
- config)) {
- dev_err(&client->dev,
- "Configuration register write error, aborting.\n");
- return err;
- }
+ config))
+ goto report_write_failure;

config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2);
-
- if (config < 0) {
- dev_err(&client->dev,
- "Error reading configuration register, aborting.\n");
- return err;
- }
+ if (config < 0)
+ goto report_read_failure;

config &= ~AMC6821_CONF2_RTFIE;
config &= ~AMC6821_CONF2_LTOIE;
config &= ~AMC6821_CONF2_RTOIE;
- if (i2c_smbus_write_byte_data(client,
- AMC6821_REG_CONF2, config)) {
- dev_err(&client->dev,
- "Configuration register write error, aborting.\n");
- return err;
- }
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF2,
+ config))
+ goto report_write_failure;

config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
-
- if (config < 0) {
- dev_err(&client->dev,
- "Error reading configuration register, aborting.\n");
- return err;
- }
+ if (config < 0)
+ goto report_read_failure;

config &= ~AMC6821_CONF1_THERMOVIE;
config &= ~AMC6821_CONF1_FANIE;
@@ -958,14 +930,21 @@ static int amc6821_init_client(struct i2c_client *client)
else
config &= ~AMC6821_CONF1_PWMINV;

- if (i2c_smbus_write_byte_data(
- client, AMC6821_REG_CONF1, config)) {
- dev_err(&client->dev,
- "Configuration register write error, aborting.\n");
- return err;
- }
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1,
+ config))
+ goto report_write_failure;
}
return 0;
+
+report_read_failure:
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return -EIO;
+
+report_write_failure:
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ return -EIO;
}

static int amc6821_probe(struct i2c_client *client,
--
2.14.3
\
 
 \ /
  Last update: 2017-10-24 22:11    [W:0.055 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site