[lkml]   [2017]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 4.13 22/85] usb: musb: Check for host-mode using is_host_active() on reset interrupt
4.13-stable review patch.  If anyone has any objections, please let me know.


From: Jonathan Liu <>

commit 445ef61543da3db5b699f87fb0aa4f227165f6ed upstream.

The sunxi musb has a bug where sometimes it will generate a babble
error on device disconnect instead of a disconnect IRQ. When this
happens the musb controller switches from host mode to device mode
MUSB_DEVCTL_BDEVICE) and gets stuck in this state.

The babble error is misdetected as a bus reset because MUSB_DEVCTL_HM
was cleared.

To fix this, use is_host_active() rather than (devctl & MUSB_DEVCTL_HM)
to detect babble error so that sunxi musb babble recovery can handle it
by restoring the mode. This information is provided by the driver logic
and does not rely on register contents.

Signed-off-by: Jonathan Liu <>
Signed-off-by: Bin Liu <>
Signed-off-by: Greg Kroah-Hartman <>

drivers/usb/musb/musb_core.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -906,7 +906,7 @@ b_host:
if (int_usb & MUSB_INTR_RESET) {
handled = IRQ_HANDLED;
- if (devctl & MUSB_DEVCTL_HM) {
+ if (is_host_active(musb)) {
* When BABBLE happens what we can depends on which
* platform MUSB is running, because some platforms
@@ -916,9 +916,7 @@ b_host:
* drop the session.
dev_err(musb->controller, "Babble\n");
- if (is_host_active(musb))
- musb_recover_from_babble(musb);
+ musb_recover_from_babble(musb);
} else {
musb_dbg(musb, "BUS RESET as %s",

 \ /
  Last update: 2017-10-24 15:13    [W:0.277 / U:3.240 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site