lkml.org 
[lkml]   [2017]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] kdump: extend crashkernel=range:size to dynamically increase reservation size
On 10/24/17 at 01:31pm, Dave Young wrote:
> crashkernel=range:size syntax allows to reserve specified size for system
> with total memory fall into the specified range. For example:
> crashkernel=2G-3G:128M,3G-:256M reserves 128M for system with memory >=2G
> and memory <3G, and reserves 256M for system with memory >= 3G
>
> In the above case 256M as a fixed value which can not fulfill very huge
> systems with large memory and IO devices. As memory size increases usually
> minimum memory requirement for booting will also increase. It is nearly
> impossible for a kernel to run with a fixed limited memory size for all
> kinds of systems.
>
> Thus extend the crashkernel=range:size to let user specify the scaling
> ratio in kernel cmdline like below:
> crashkernel=range:size^order, for example:
> crashkernel=2G-:128M^14 reserve 128M + (total_memory - 128M) >> 14
> for machines with over 2G memory.

Well, ah.., this look a little ugly and tricky. Leave this to other
reviewers to comment.

>
> Also s/start-[end]/[start]-end/ in kernel-parameters.txt according to code
>
> Signed-off-by: Dave Young <dyoung@redhat.com>
> ---
> Documentation/admin-guide/kernel-parameters.txt | 10 ++++--
> Documentation/kdump/kdump.txt | 7 ++--
> kernel/crash_core.c | 35 +++++++++++++++++++++---
> 3 files changed, 41 insertions(+), 11 deletions(-)
>
> --- linux-x86.orig/kernel/crash_core.c
> +++ linux-x86/kernel/crash_core.c
> @@ -31,7 +31,7 @@ static unsigned char *vmcoreinfo_data_sa
> /*
> * This function parses command lines in the format
> *
> - * crashkernel=ramsize-range:size[,...][@offset]
> + * crashkernel=ramsize-range:size[,...][@offset][^order]
> *
> * The function returns 0 on success and -EINVAL on failure.
> */
> @@ -41,6 +41,7 @@ static int __init parse_crashkernel_mem(
> unsigned long long *crash_base)
> {
> char *cur = cmdline, *tmp;
> + bool infinite_end = false;
>
> /* for each entry of the comma-separated list */
> do {
> @@ -93,13 +94,21 @@ static int __init parse_crashkernel_mem(
> /* match ? */
> if (system_ram >= start && system_ram < end) {
> *crash_size = size;
> + if (end == ULLONG_MAX)
> + infinite_end = true;
> break;
> }
> } while (*cur++ == ',');
>
> - if (*crash_size > 0) {
> - while (*cur && *cur != ' ' && *cur != '@')
> + if (*crash_size <= 0)
> + goto out;
> +
> + while (*cur && *cur != ' ') {
> + if (*cur != '@' && *cur != '^') {
> cur++;
> + continue;
> + }
> +
> if (*cur == '@') {
> cur++;
> *crash_base = memparse(cur, &tmp);
> @@ -107,10 +116,28 @@ static int __init parse_crashkernel_mem(
> pr_warn("Memory value expected after '@'\n");
> return -EINVAL;
> }
> - }
> + cur = tmp;
> + } else if (*cur == '^' && infinite_end ) {
> + unsigned long long shift, size;
> +
> + cur++;
> + shift = memparse(cur, &tmp);
> + if (cur == tmp) {
> + pr_warn("Memory reservation scale order expected after '^'\n");
> + return -EINVAL;
> + }
> + size = (system_ram - *crash_size) >> shift;
> + size = *crash_size + roundup(size, 1ULL << 20);
> + if (size < system_ram)
> + *crash_size = size;
> + cur = tmp;
> + } else
> + cur++;
> }
>
> return 0;
> +out:
> + return -EINVAL;
> }
>
> /*
> --- linux-x86.orig/Documentation/admin-guide/kernel-parameters.txt
> +++ linux-x86/Documentation/admin-guide/kernel-parameters.txt
> @@ -680,12 +680,14 @@
> is selected automatically. Check
> Documentation/kdump/kdump.txt for further details.
>
> - crashkernel=range1:size1[,range2:size2,...][@offset]
> + crashkernel=range1:size1[,range2:size2,...][@offset][^order]
> [KNL] Same as above, but depends on the memory
> in the running system. The syntax of range is
> - start-[end] where start and end are both
> - a memory unit (amount[KMG]). See also
> - Documentation/kdump/kdump.txt for an example.
> + [start]-end where start and end are both
> + a memory unit (amount[KMG]). In case the end of the
> + range is infinity '^order' can be used to scale
> + the size to size + (total_mem - start) >> 2^order
> + See also Documentation/kdump/kdump.txt for an example.
>
> crashkernel=size[KMG],high
> [KNL, x86_64] range could be above 4G. Allow kernel
> --- linux-x86.orig/Documentation/kdump/kdump.txt
> +++ linux-x86/Documentation/kdump/kdump.txt
> @@ -267,19 +267,20 @@ been removed from the machine.
>
> The syntax is:
>
> - crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
> + crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset][^order]
> range=start-[end]
>
> For example:
>
> - crashkernel=512M-2G:64M,2G-:128M
> + crashkernel=512M-2G:64M,2G-:128M^14
>
> This would mean:
>
> 1) if the RAM is smaller than 512M, then don't reserve anything
> (this is the "rescue" case)
> 2) if the RAM size is between 512M and 2G (exclusive), then reserve 64M
> - 3) if the RAM size is larger than 2G, then reserve 128M
> + 3) if the RAM size is larger than 2G, then reserve:
> + 128M + (total_mem - 128M) >> 14
>
>
>
>
>

\
 
 \ /
  Last update: 2017-10-24 08:01    [W:0.035 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site