lkml.org 
[lkml]   [2017]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 03/12] PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE
On 16 October 2017 at 03:29, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Modify i2c-designware-platdrv to set DPM_FLAG_SMART_PREPARE for its
> devices and return 0 from the system suspend ->prepare callback
> if the device has an ACPI companion object in order to tell the PM
> core and middle layers to avoid skipping system suspend/resume
> callbacks for the device in that case (which may be problematic,
> because the device may be accessed during suspend and resume of
> other devices via I2C operation regions then).
>
> Also the pm_runtime_suspended() check in dw_i2c_plat_prepare()
> is not necessary any more, because the core does it when setting
> power.direct_complete for the device, so drop it.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> drivers/i2c/busses/i2c-designware-platdrv.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> Index: linux-pm/drivers/i2c/busses/i2c-designware-platdrv.c
> ===================================================================
> --- linux-pm.orig/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ linux-pm/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -370,6 +370,8 @@ static int dw_i2c_plat_probe(struct plat
> ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
> adap->dev.of_node = pdev->dev.of_node;
>
> + dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_SMART_PREPARE);
> +
> /* The code below assumes runtime PM to be disabled. */
> WARN_ON(pm_runtime_enabled(&pdev->dev));
>
> @@ -433,7 +435,13 @@ MODULE_DEVICE_TABLE(of, dw_i2c_of_match)
> #ifdef CONFIG_PM_SLEEP
> static int dw_i2c_plat_prepare(struct device *dev)
> {
> - return pm_runtime_suspended(dev);
> + /*
> + * If the ACPI companion device object is present for this device, it
> + * may be accessed during suspend and resume of other devices via I2C
> + * operation regions, so tell the PM core and middle layers to avoid
> + * skipping system suspend/resume callbacks for it in that case.
> + */

The above scenario can also happens for non-acpi companion devices.
That makes this comment a bit confusing to me.

> + return !has_acpi_companion(dev);

I understand it still works by always returning 1 for the non-acpi
case, because the PM core deals with it for the direct_complete path.
However it looks rather odd, especially due to the comment above.

Perhaps returning pm_runtime_suspended() in the other case make this
more clear? Or perhaps clarifying the comment somehow? :-)

> }
>
> static void dw_i2c_plat_complete(struct device *dev)
>
>

Kind regards
Uffe

\
 
 \ /
  Last update: 2017-10-23 18:58    [W:0.589 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site