lkml.org 
[lkml]   [2017]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] gpio-adnp: Use common error handling code in adnp_gpio_dbg_show()
Date
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sun, 22 Oct 2017 20:21:55 +0200

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/gpio/gpio-adnp.c | 29 +++++++++++++----------------
1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
index 89863ea25de1..7f475eef3faa 100644
--- a/drivers/gpio/gpio-adnp.c
+++ b/drivers/gpio/gpio-adnp.c
@@ -192,28 +192,20 @@ static void adnp_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
mutex_lock(&adnp->i2c_lock);

err = adnp_read(adnp, GPIO_DDR(adnp) + i, &ddr);
- if (err < 0) {
- mutex_unlock(&adnp->i2c_lock);
- return;
- }
+ if (err < 0)
+ goto unlock;

err = adnp_read(adnp, GPIO_PLR(adnp) + i, &plr);
- if (err < 0) {
- mutex_unlock(&adnp->i2c_lock);
- return;
- }
+ if (err < 0)
+ goto unlock;

err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier);
- if (err < 0) {
- mutex_unlock(&adnp->i2c_lock);
- return;
- }
+ if (err < 0)
+ goto unlock;

err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr);
- if (err < 0) {
- mutex_unlock(&adnp->i2c_lock);
- return;
- }
+ if (err < 0)
+ goto unlock;

mutex_unlock(&adnp->i2c_lock);

@@ -240,6 +232,11 @@ static void adnp_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
direction, level, interrupt, pending);
}
}
+
+ return;
+
+unlock:
+ mutex_unlock(&adnp->i2c_lock);
}

static int adnp_gpio_setup(struct adnp *adnp, unsigned int num_gpios)
--
2.14.2
\
 
 \ /
  Last update: 2017-10-22 20:28    [W:0.218 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site