lkml.org 
[lkml]   [2017]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/6] staging: fsl-dpaa2/ethsw: Add TODO
Date
Add a TODO file describing what needs to be added/changed before the driver
can be moved out of staging.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
---
Changelog:
v2:
- no changes

drivers/staging/fsl-dpaa2/ethsw/TODO | 14 ++++++++++++++
1 file changed, 14 insertions(+)
create mode 100644 drivers/staging/fsl-dpaa2/ethsw/TODO

diff --git a/drivers/staging/fsl-dpaa2/ethsw/TODO b/drivers/staging/fsl-dpaa2/ethsw/TODO
new file mode 100644
index 0000000..d3f12c3
--- /dev/null
+++ b/drivers/staging/fsl-dpaa2/ethsw/TODO
@@ -0,0 +1,14 @@
+* Add I/O capabilities on switch port netdevices. This will allow control
+traffic to reach the CPU.
+* Add ACL to redirect control traffic to CPU.
+* Add support for displaying learned FDB entries
+* MC firmware uprev; the DPAA2 objects used by the Ethernet Switch driver
+need to be kept in sync with binary interface changes in MC
+* refine README file
+* cleanup
+
+NOTE: At least first three of the above are required before getting the
+DPAA2 Ethernet Switch driver out of staging. Another requirement is that
+the fsl-mc bus driver is moved to drivers/bus and dpio driver is moved to
+drivers/soc (this is required for I/O).
+
--
1.9.1
\
 
 \ /
  Last update: 2017-10-02 10:38    [W:0.060 / U:1.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site