lkml.org 
[lkml]   [2017]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 12/12] ARM: dtsi: axp81x: set pinmux for GPIO0/1 when used as LDOs
On Tue, Oct 3, 2017 at 4:42 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Mon, Oct 02, 2017 at 12:08:54PM +0000, Quentin Schulz wrote:
>> On AXP813/818, GPIO0 and GPIO1 can be used as LDO as (respectively)
>> ldo_io0 and ldo_io1.
>>
>> Let's add the pinctrl properties to the said regulators.
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
>> ---
>> arch/arm/boot/dts/axp81x.dtsi | 14 ++++++++++++++
>> 1 file changed, 14 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
>> index f90f257130d5..099b0ddc1bbb 100644
>> --- a/arch/arm/boot/dts/axp81x.dtsi
>> +++ b/arch/arm/boot/dts/axp81x.dtsi
>> @@ -52,6 +52,16 @@
>> compatible = "x-powers,axp813-gpio";
>> gpio-controller;
>> #gpio-cells = <2>;
>> +
>> + gpio0_ldo: gpio0_ldo {
>> + pins = "GPIO0";
>> + function = "ldo";
>> + };
>> +
>> + gpio1_ldo: gpio1_ldo {
>> + pins = "GPIO1";
>> + function = "ldo";
>> + };
>
> The node names are not supposed to contain any hyphens.

Hmm, I was under the impression that hyphens were preferred in
node names, and a warning would be added to dtc later on.
I might be wrong though.

ChenYu

\
 
 \ /
  Last update: 2017-10-03 04:07    [W:0.107 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site