lkml.org 
[lkml]   [2017]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] dwc: dra7xx: Print link state to console for debug
From
Date


On Thursday 19 October 2017 06:13 PM, Faiz Abbas wrote:
> Enable support for printing the LTSSM link state for debugging PCI
> when link is down.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
> v2:
> 1. Changed dev_err() to dev_dbg()
> 2. Changed static char array to static const char * const
> 3. format changes
>
> drivers/pci/dwc/pci-dra7xx.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> index 34427a6..0e70e77 100644
> --- a/drivers/pci/dwc/pci-dra7xx.c
> +++ b/drivers/pci/dwc/pci-dra7xx.c
> @@ -98,6 +98,45 @@ struct dra7xx_pcie_of_data {
>
> #define to_dra7xx_pcie(x) dev_get_drvdata((x)->dev)
>
> +static const char * const state[] = {
> + "DETECT_QUIET",
> + "DETECT_ACT",
> + "POLL_ACTIVE",
> + "POLL_COMPLIANCE",
> + "POLL_CONFIG",
> + "PRE_DETECT_QUIET",
> + "DETECT_WAIT",
> + "CFG_LINKWD_START",
> + "CFG_LINKWD_ACEPT",
> + "CFG_LANENUM_WAIT",
> + "CFG_LANENUM_ACEPT",
> + "CFG_COMPLETE",
> + "CFG_IDLE",
> + "RCVRY_LOCK",
> + "RCVRY_SPEED",
> + "RCVRY_RCVRCFG",
> + "RCVRY_IDLE",
> + "L0",
> + "L0S",
> + "L123_SEND_EIDLE",
> + "L1_IDLE",
> + "L2_IDLE",
> + "L2_WAKE",
> + "DISABLED_ENTRY",
> + "DISABLED_IDLE",
> + "DISABLED",
> + "LPBK_ENTRY",
> + "LPBK_ACTIVE",
> + "LPBK_EXIT",
> + "LPBK_EXIT_TIMEOUT",
> + "HOT_RESET_ENTRY",
> + "HOT_RESET",
> + "RCVRY_EQ0",
> + "RCVRY_EQ1",
> + "RCVRY_EQ2",
> + "RCVRY_EQ3"
> +};
> +
> static inline u32 dra7xx_pcie_readl(struct dra7xx_pcie *pcie, u32 offset)
> {
> return readl(pcie->base + offset);
> @@ -118,6 +157,15 @@ static int dra7xx_pcie_link_up(struct dw_pcie *pci)
> {
> struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
> u32 reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_PHY_CS);
> + u32 cmd_reg;
> + u32 ltssm_state;
> +
> + if (!(reg & LINK_UP)) {
> + cmd_reg = dra7xx_pcie_readl(dra7xx,
> + PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
> + ltssm_state = (cmd_reg & GENMASK(7, 2)) >> 2;
> + dev_dbg(pci->dev, "Link state:%s\n", state[ltssm_state]);
> + }
>
> return !!(reg & LINK_UP);
> }
>

I missed David's comment in v1. Will submit a new version. Please ignore.

Thanks,
Faiz

\
 
 \ /
  Last update: 2017-10-22 17:23    [W:0.436 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site