lkml.org 
[lkml]   [2017]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] Documentation: dt: extcon: add optional input-debounce attribute
Date
Add documentation on optional dt attribute "input-debounce"
in extcon node to capture user specified timeout value for id
and vbus gpio detection.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
---

Changes in v3:
- Modified commit log to name debounce-timeout-ms to input-debounce
- Added Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

Changes in v2:
Rename debounce-timeout-ms to input-debounce

Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
index dfc14f7..d115900 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
@@ -10,6 +10,9 @@ Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
- id-gpio: gpio for USB ID pin. See gpio binding.
- vbus-gpio: gpio for USB VBUS pin.

+Optional properties:
+- input-debounce: debounce timeout value for id and vbus gpio in microseconds.
+
Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
--
1.9.1
\
 
 \ /
  Last update: 2017-10-22 17:22    [W:0.071 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site