lkml.org 
[lkml]   [2017]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: dtc issue with overlays starting in next-20171009
From
Date
On 10/18/17 13:16, Rob Herring wrote:
> Use devicetree-compiler list for dtc issues please.
>
> On Wed, Oct 18, 2017 at 2:33 PM, Frank Rowand <frowand.list@gmail.com> wrote:
>> Hi Rob, Alan,
>>
>> On 10/18/17 08:58, Alan Tull wrote:
>>> Hi Rob,
>>>
>>> I've noticed a problem compiling DT overlays and traced it back to
>>> beginning in next-20171009
>>>
>>> That tag adds the following in scripts/dtc
>>>
>>> e9480c1 2017-10-09 16:17:32 +0100 : Mark Brown : Merge remote-tracking
>>> branch 'devicetree/for-next'
>>> 4201d05 2017-10-03 15:03:47 -0500 : Rob Herring : scripts/dtc: Update
>>> to upstream version v1.4.5-3-gb1a60033c110
>>> 4322323 2017-10-03 15:03:46 -0500 : Rob Herring : scripts/dtc: add
>>> fdt_overlay.c and fdt_addresses.c to sync script
>>>
>>> The error is:
>>>
>>> dtc: /home/atull/repos/linux-socfpga/scripts/dtc/livetree.c:543:
>>> get_node_by_phandle: Assertion `(phandle != 0) && (phandle != -1)'
>>> failed.
>>> arch/arm/boot/dts/socfpga_overlay.dtb: Warning (clocks_property):
>>> Could not get phandle node for
>>> /fragment@0/__overlay__/gpio@10040:clocks(cell 0)
>>> Aborted (core dumped)
>>> scripts/Makefile.lib:316: recipe for target
>>> 'arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc_ghrd_ovl_ext_cfg.dtb'
>>> failed
>>> make[2]: *** [arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc_ghrd_ovl_ext_cfg.dtb]
>>> Error 134
>>> arch/arm/Makefile:346: recipe for target 'dtbs' failed
>>>
>>> Here's a simplified overlay that gets this error. Taking out the line
>>> "interrupt-parent = <&intc>;" fixes the build.
>>>
>>> /dts-v1/;
>>> /plugin/;
>>> / {
>>> fragment@0 {
>>> target-path = "/soc/base_fpga_region";
>>> #address-cells = <1>;
>>> #size-cells = <1>;
>>>
>>> __overlay__ {
>>> ranges = <0x00000000 0x00000000 0xc0000000 0x00040000>,
>>> <0x00000001 0x00000000 0xff200000 0x00001000>;
>>>
>>> external-fpga-config;
>>>
>>> #address-cells = <2>;
>>> #size-cells = <1>;
>>>
>>> fpga_pr_region0 {
>>> compatible = "fpga-region";
>>> fpga-bridges = <&freeze_controller_0>;
>>> ranges;
>>> };
>>>
>>> freeze_controller_0: freeze_controller@0x100000450 {
>>> compatible = "altr,freeze-bridge-controller";
>>> reg = <0x00000001 0x00000450 0x00000010>;
>>> interrupt-parent = <&intc>; /* <--
>>> remove to fix build */
>>> interrupts = <0 21 4>;
>>> };
>>> };
>>> };
>>> };
>>>
>>> Alan
>>
>> Phandle references in overlays are assigned the value of -1 (0xffffffff) in
>> the dtb, to be fixed up when loaded. A new check sees this value and
>> triggers the assert.
>>
>> It is this commit in the upstream dtc tools tree:
>>
>> commit ee3d26f6960bb5922d9a35fe266d9eac74a78ec0
>> checks: add interrupts property check
>>
>> There are a bunch of other new checks that call get_node_by_phandle(),
>> and thus could trigger the assertion.
>>
>> I'm guessing that those checks would also trigger the assert if an
>> overlay contained something that would lead to one of the other checks
>> being processed.
>
> You won't get an assert because I check for 0 or -1 and skip the check
> in those cases. The interrupts check missed that condition.

Awesome, thank for confirming that. That means the temporary work around
is quite easy.

>
> However, as shown above, you will get an erroneous warning because it
> just skips 1 cell and goes to the next to handle the case where the
> phandle is optional and you want a fixed number of elements.

Just for those reading along at home, with the one warning disabled, the
messages become:

$ dtc -Wno-interrupts_property socfpga_arria10_socdk_sdmmc_ghrd_ovl_ext_cfg.dts >junk.dtb
<stdout>: Warning (unit_address_vs_reg): Node /fragment@0 has a unit name, but no reg property
<stdout>: Warning (unit_address_vs_reg): Node /fragment@0/__overlay__ has a reg or ranges property, but no unit name


> I guess we can't validate overlays which is unfortunate. I don't think
> that's a solvable problem unless you have the base DT.

Yes, maybe. But there are still some useful warnings for overlays, maybe. I'm
not sure what the implications of the "range_format" warning that I will show
below are (I'd actually have to spend a few minutes thinking about ranges, and
I don't have the cycles right now).


>
>> You can avoid the problem in your example dts with "-Wno-interrupts_property"
>>
>> dtc -Wno-interrupts_property fpga_01_a.dts
>>
>> The larger set of other checks that might trigger the assert is too large
>> for me to want to add "-Wno-" flags for all of them to the command line
>> (as temporary workarounds).
>
> David thought more switches were better.

Yep. Not a complaint, just an observation about a _temporary_ workaround.


>
> Rob
>


Here is the "range_format" warning I mentioned above. The dts file that
started this thread hand crafts what is internal overlay data, which
should be generated by the dtc compiler instead of being hand coded in
the dts. If I remove the hand coded stuff and let dtc generate the
internal overlay data, the dtc messages become (use a wide window to
avoid line wrapping):

$ dtc -Wno-interrupts_property fpga_01_a.dts >junk.dtb
<stdout>: Warning (ranges_format): "ranges" property in /fragment@0/__overlay__ has invalid length (32 bytes) (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1)
<stdout>: Warning (unit_address_vs_reg): Node /fragment@0 has a unit name, but no reg property
<stdout>: Warning (unit_address_vs_reg): Node /fragment@0/__overlay__ has a reg or ranges property, but no unit name
<stdout>: Warning (avoid_default_addr_size): Relying on default #address-cells value for /fragment@0/__overlay__
<stdout>: Warning (avoid_default_addr_size): Relying on default #size-cells value for /fragment@0/__overlay__


The second through last warning are about the format of the internal
data structure, and hopefully could just be suppressed. I don't
know how easy or hard that would be to implement - I am very much
not a dtc internals expert.

The first warning says something about what the overlay source dts
contains. Here is what the original dts source looks like when
transformed to not contain the hand crafted internal overlay data:

$ cat fpga_01_a.dts
/dts-v1/;
/plugin/;

// This assumes an existing label in the base dts
// whose location is "/soc/base_fpga_region"
&fpga_region {

ranges = <0x00000000 0x00000000 0xc0000000 0x00040000>,
<0x00000001 0x00000000 0xff200000 0x00001000>;

external-fpga-config;

#address-cells = <2>;
#size-cells = <1>;

fpga_pr_region0 {
compatible = "fpga-region";
fpga-bridges = <&freeze_controller_0>;
ranges;
};

freeze_controller_0: freeze_controller@100000450 {
compatible = "altr,freeze-bridge-controller";
reg = <0x00000001 0x00000450 0x00000010>;
interrupt-parent = <&intc>; /* <-- remove to fix build */
interrupts = <0 21 4>;
};
};

Of course, if this was a real transformation, I would remove all the
extra tabbing. But the current form makes it easier to see that all
of the stuff that is highly indented is unchanged from the original
dts file.

$ diff -u socfpga_arria10_socdk_sdmmc_ghrd_ovl_ext_cfg.dts fpga_01_a.dts
--- socfpga_arria10_socdk_sdmmc_ghrd_ovl_ext_cfg.dts 2017-10-18 15:18:43.123137508 -0700
+++ fpga_01_a.dts 2017-10-18 15:18:11.587136897 -0700
@@ -1,12 +1,10 @@
/dts-v1/;
/plugin/;
-/ {
- fragment@0 {
- target-path = "/soc/base_fpga_region";
- #address-cells = <1>;
- #size-cells = <1>;

- __overlay__ {
+// This assumes an existing label in the base dts
+// whose location is "/soc/base_fpga_region"
+&fpga_region {
+
ranges = <0x00000000 0x00000000 0xc0000000 0x00040000>,
<0x00000001 0x00000000 0xff200000 0x00001000>;

@@ -27,6 +25,4 @@
interrupt-parent = <&intc>; /* <-- remove to fix build */
interrupts = <0 21 4>;
};
- };
- };
};

-Frank

\
 
 \ /
  Last update: 2017-10-22 17:19    [W:0.204 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site