[lkml]   [2017]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 4/9] drm/panel: simple: add support for overriding the pixel clock polarity
On Tue, Oct 17, 2017 at 02:25:07PM +0200, Lothar Waßmann wrote:
> Hi,
> On Tue, 17 Oct 2017 14:14:22 +0200 Thierry Reding wrote:
> > On Wed, Oct 11, 2017 at 01:23:36PM +0200, Lothar Waßmann wrote:
> > > The Ka-Ro electronics MB7 baseboard has an on-board LCD->LVDS
> > > converter that requires a fixed pixelclk polarity, no matter what the
> > > panel's display_mode specifies. Add an option to override the pixelclk
> > > polarity defined in the panel's display_mode via DTB.
> >
> > I'd argue that the LCD->LVDS converter should be modelled specifically
> > in DT to handle this case. It could be a implemented as a DRM bridge
> > driver, for example.
> >
> IMO that's just overkill for a simple chip that is in no way
> configurable nor detectable by software.

I suspect that you're not the only one who runs a board that has this
kind of quirk. If we solve this in a generic way we can point people in
that direction when they come asking for such a quirk.

So this could be something very simple that's instantiated using maybe a
couple of lines of code.

[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2017-10-17 14:45    [W:0.085 / U:0.908 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site