lkml.org 
[lkml]   [2017]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/10] ARM: dts: sun4i: Enable HDMI support on some A10 devices
Date
Various A10-based development boards have standard HDMI connectors
wired to the dedicated HDMI pins on the SoC.

Enable the display pipeline and HDMI output on boards I have or have
access to schematics:

- Cubieboard
- Olimex A10-OLinuXino-LIME

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

Can someone could double check the LIME for me? It should work given
it's the same layout as the A20 variant, which has been tested.

---
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 25 +++++++++++++++++++++++++
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 21 +++++++++++++++++++++
2 files changed, 46 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index d5ba5400a975..1982c8c238c5 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -59,6 +59,17 @@
stdout-path = "serial0:115200n8";
};

+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -90,6 +101,10 @@
cpu-supply = <&reg_dcdc2>;
};

+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -107,6 +122,16 @@
status = "okay";
};

+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
status = "okay";

diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 2d1b4329f54a..e39ec9beef75 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -58,6 +58,17 @@
stdout-path = "serial0:115200n8";
};

+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -106,6 +117,16 @@
status = "okay";
};

+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
status = "okay";

--
2.14.2
\
 
 \ /
  Last update: 2017-10-17 14:20    [W:0.101 / U:26.212 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site