lkml.org 
[lkml]   [2017]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts
Date
The display, that incorporates this touchpanel is obsolete and won't
be supported any more.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 23 +----------------------
arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 22 +---------------------
arch/arm/boot/dts/imx6q-tx6q-1110.dts | 21 ---------------------
arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 22 +---------------------
4 files changed, 3 insertions(+), 85 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
index 5e0c6bb..f0f759a 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -98,19 +98,6 @@
};
};

-&i2c3 {
- polytouch2: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupt-parent = <&gpio3>;
- interrupts = <22 0>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
&kpp {
status = "disabled"; /* pad conflict with backlight1 PWM */
};
@@ -168,11 +155,3 @@
&pwm1 {
status = "okay";
};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
index b9a783f..c817324 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -106,18 +106,6 @@
xceiver-supply = <&reg_3v3>;
};

-&i2c3 {
- polytouch1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
&kpp {
status = "disabled"; /* pads partially clash with backlight1 PWM */
};
@@ -245,11 +233,3 @@
&pwm1 {
status = "okay";
};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
index 0f5e638..900557d 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -98,19 +98,6 @@
};
};

-&i2c3 {
- polytouch1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupt-parent = <&gpio3>;
- interrupts = <22 0>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
&kpp {
status = "disabled"; /* pad conflict with backlight1 PWM */
};
@@ -172,11 +159,3 @@
&sata {
status = "okay";
};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
index d78b129..6b42c44 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -107,18 +107,6 @@
xceiver-supply = <&reg_3v3>;
};

-&i2c3 {
- polytouch1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
&ipu2 {
status = "disabled";
};
@@ -254,11 +242,3 @@
&sata {
status = "okay";
};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
-};
--
2.1.4
\
 
 \ /
  Last update: 2017-10-17 10:57    [W:0.098 / U:5.020 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site