lkml.org 
[lkml]   [2017]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard
Date
Move the MB7 specific settings to a separate .dtsi file to facilitate
supporting more module variants with this baseboard.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 9 +--
arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 42 +------------
arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi | 99 ++++++++++++++++++++++++++++++
3 files changed, 102 insertions(+), 48 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi

diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
index e43ff12..21eaec9 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
@@ -43,6 +43,7 @@
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6qdl-tx6-lvds.dtsi"
+#include "imx6qdl-tx6-mb7.dtsi"

/ {
model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard";
@@ -58,11 +59,3 @@
pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
turn-on-delay-ms = <35>;
};
-
-&can1 {
- status = "disabled";
-};
-
-&can2 {
- xceiver-supply = <&reg_3v3>;
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
index 9648c21..387edf2 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
@@ -40,47 +40,9 @@
*/

/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
+#include "imx6q-tx6q-1110.dts"
+#include "imx6qdl-tx6-mb7.dtsi"

/ {
model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
- compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&backlight0 {
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- turn-on-delay-ms = <35>;
- power-supply = <&reg_lcd1_pwr>;
-};
-
-&backlight1 {
- pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
- turn-on-delay-ms = <35>;
- power-supply = <&reg_lcd1_pwr>;
-};
-
-&can1 {
- status = "disabled";
-};
-
-&can2 {
- xceiver-supply = <&reg_3v3>;
-};
-
-&ipu2 {
- status = "disabled";
-};
-
-&lvds0_panel {
- compatible = "edt,et057090dhu";
-};
-
-&lvds1_panel {
- compatible = "edt,et057090dhu";
-};
-
-&sata {
- status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
new file mode 100644
index 0000000..4c4e2e1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ backlight0 {
+ pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+ turn-on-delay-ms = <35>;
+ power-supply = <&reg_lcd1_pwr>;
+ };
+
+ backlight1 {
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ turn-on-delay-ms = <35>;
+ power-supply = <&reg_lcd1_pwr>;
+ };
+
+ lcd-panel {
+ compatible = "edt,et057090dhu";
+ bus-format-override = "rgb24";
+ pixelclk-active = <0>;
+ };
+
+ lvds0-panel {
+ compatible = "edt,etml1010g0dka";
+ bus-format-override = "spwg-18";
+ pixelclk-active = <0>;
+ };
+
+ lvds1-panel {
+ compatible = "edt,etml1010g0dka";
+ bus-format-override = "spwg-18";
+ pixelclk-active = <0>;
+ };
+};
+
+&can1 {
+ status = "disabled";
+};
+
+&can2 {
+ xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+ /*
+ * The backup voltage of the module internal RTC is not wired
+ * by default on the MB7, so disable that RTC chip.
+ */
+ status = "disabled";
+};
+
+&i2c3 {
+ rtc: mcp7940x@6f {
+ compatible = "microchip,mcp7940x";
+ reg = <0x6f>;
+ };
+};
+
+&reg_lcd0_pwr {
+ status = "disabled";
+};
--
2.1.4
\
 
 \ /
  Last update: 2017-10-17 10:56    [W:0.102 / U:1.728 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site