lkml.org 
[lkml]   [2017]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: BUG_ON() in irq_work_run_list
Date
Chandan Rajendra <chandan@linux.vnet.ibm.com> writes:

> Executing fstests' generic/036 test in a loop on next-20171013 kernel causes
> BUG_ON()'s condition to evaluate to true,

Did it used to work? ie. the bug just started happening? If so is there
a next tag which *doesn't* have the bug.

> run fstests generic/036 at 2017-10-14 09:23:29
> ------------[ cut here ]------------
> kernel BUG at /root/repos/linux/kernel/irq_work.c:138!
> Oops: Exception in kernel mode, sig: 5 [#1]
> BE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries
> Modules linked in:
> CPU: 3 PID: 0 Comm: swapper/3 Tainted: G W 4.14.0-rc4-next-20171013 #7
> task: c00000063862c780 task.stack: c0000006387e4000
> NIP: c0000000002476ac LR: c0000000002477c8 CTR: 0000000000000000
> REGS: c00000063ffd3810 TRAP: 0700 Tainted: G W (4.14.0-rc4-next-20171013)
> MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 24002442 XER: 20000000
^
Hard enabled, but that's expected.

> CFAR: c0000000002477c4 SOFTE: 1
^
Also soft enabled, which is bad.

> GPR00: c0000000001b70c4 c00000063ffd3a90 c00000000143bb00 c00000063fee1a60
> GPR04: 000000000000002b c000000635ad1b0c c00000063383c9e8 0000000000000000
> GPR08: 000000063ecd0000 0000000000000001 0000000000000001 0000000000000000
> GPR12: 0000000028002482 c00000000fd41080 c0000006387e7f90 0000000000000200
> GPR16: f000000000b048c0 0000000000000000 c0000000013a0920 c0000000013a0920
> GPR20: 0000000000000003 0000000000000000 0000000000000001 0000000000000002
> GPR24: 0000000000000010 c00000063e22c498 c00000063ffd3df0 0000000000000000
> GPR28: 000000063ecd0000 0000000000000000 0000000000000000 c000000001211a60
> NIP [c0000000002476ac] .irq_work_run_list+0xc/0x100
> LR [c0000000002477c8] .irq_work_run+0x28/0x50
> Call Trace:
> [c00000063ffd3a90] [c000000000787638] .__blk_mq_complete_request_remote+0x38/0x50 (unreliable)
> [c00000063ffd3b10] [c0000000001b70c4] .flush_smp_call_function_queue+0xd4/0x1e0
> [c00000063ffd3ba0] [c000000000044a4c] .smp_ipi_demux_relaxed+0x9c/0x110
> [c00000063ffd3c30] [c00000000008dbdc] .icp_hv_ipi_action+0x5c/0xb0
> [c00000063ffd3cb0] [c000000000174384] .__handle_irq_event_percpu+0x94/0x2d0
> [c00000063ffd3d80] [c0000000001745f4] .handle_irq_event_percpu+0x34/0x90
> [c00000063ffd3e10] [c00000000017ae20] .handle_percpu_irq+0x80/0xd0
> [c00000063ffd3e90] [c000000000172ad0] .generic_handle_irq+0x50/0x80
> [c00000063ffd3f10] [c000000000016cd0] .__do_irq+0x90/0x210
> [c00000063ffd3f90] [c00000000002a900] .call_do_irq+0x14/0x24
> [c0000006387e77a0] [c000000000016ee0] .do_IRQ+0x90/0x140
> [c0000006387e7840] [c000000000008c20] hardware_interrupt_common+0x150/0x160
> --- interrupt: 501 at .plpar_hcall_norets+0x14/0x20
> LR = .check_and_cede_processor+0x2c/0x40
> [c0000006387e7b30] [c000000000b3f028] .check_and_cede_processor+0x18/0x40 (unreliable)
> [c0000006387e7ba0] [c000000000b3f3c8] .shared_cede_loop+0x48/0x140
> [c0000006387e7c20] [c000000000b3c644] .cpuidle_enter_state+0xa4/0x410
> [c0000006387e7cd0] [c000000000159158] .call_cpuidle+0x68/0xd0
> [c0000006387e7d60] [c000000000159640] .do_idle+0x2b0/0x310
> [c0000006387e7e20] [c0000000001598b0] .cpu_startup_entry+0x30/0x40
> [c0000006387e7ea0] [c000000000045e38] .start_secondary+0x4e8/0x530
> [c0000006387e7f90] [c00000000000b06c] start_secondary_prolog+0x10/0x14
> Instruction dump:
> 38600001 4e800020 60000000 60000000 60000000 38600000 4e800020 60000000
> 60000000 894d027a 312affff 7d295110 <0b090000> e9230000 2fa90000 4d9e0020
> ---[ end trace 921006f210ad28ba ]---
>
> The corresponding code is,
>
> static void irq_work_run_list(struct llist_head *list)
> {
> unsigned long flags;
> struct irq_work *work;
> struct llist_node *llnode;
>
> BUG_ON(!irqs_disabled());

OK. Called from irq_work_run() called from the end of
flush_smp_call_function_queue().

That's also before we start running any of the irq_work functions, so it
can't have been one of them.

So seemingly something that was smp_call_function'ed() turned interrupts
back on.

The obvious candidate being __blk_mq_complete_request_remote(). It's
called via smp_call_function_single_async() in __blk_mq_complete_request().

The problem is __blk_mq_complete_request_remote() actually just calls
another function via a pointer, and we don't have a good way of working
out what that was. It's no longer in CTR (although it's a bit odd that
CTR is 0x0), it could be in a GPR but we can't know which one without a
full disassembly.

I dug a bit more but couldn't see anything obvious.

Does this reproduce? Easily?

cheers

\
 
 \ /
  Last update: 2017-10-17 04:22    [W:0.901 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site