lkml.org 
[lkml]   [2017]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits
Date
While debugging inverted color from the HDMI output on the A10, I
found that the lowest 3 bits were set. These were cleared on A20
boards that had normal display output. By manually toggling these
bits the mapping of the color components to these bits was found.

While these are not used anywhere, it would be nice to document
them somewhere.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/gpu/drm/sun4i/sun4i_hdmi.h | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
index 9b97da39927e..b685ee11623d 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
@@ -72,6 +72,11 @@
#define SUN4I_HDMI_PAD_CTRL1_HALVE_CLK BIT(6)
#define SUN4I_HDMI_PAD_CTRL1_REG_AMP(n) (((n) & 7) << 3)

+/* These bits seem to invert the TMDS data channels */
+#define SUN4I_HDMI_PAD_CTRL1_INVERT_R BIT(2)
+#define SUN4I_HDMI_PAD_CTRL1_INVERT_G BIT(1)
+#define SUN4I_HDMI_PAD_CTRL1_INVERT_B BIT(0)
+
#define SUN4I_HDMI_PLL_CTRL_REG 0x208
#define SUN4I_HDMI_PLL_CTRL_PLL_EN BIT(31)
#define SUN4I_HDMI_PLL_CTRL_BWS BIT(30)
--
2.14.2
\
 
 \ /
  Last update: 2017-10-14 06:04    [W:0.103 / U:11.580 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site