lkml.org 
[lkml]   [2017]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/3] Enable CEC on rk3399
Hi Hans,

> Nice! I had a similar dw-hdmi.c patch pending but got around to posting it.
>
> I'll brush off my old rk3288 patches and see if I can get CEC enabled
> for my firefly-reload. I was close to getting it work, but I guess
> missed the "enable cec pin" change.
Please note that on rk3288, there are two CEC pins, and you must write
in RK3288_GRF_SOC_CON8 which pin you're using.
On the firefly-reload, the pin used is GPIO7C0, while the default pin
configuration is GPIO7C7.

Regards,

\
 
 \ /
  Last update: 2017-10-14 15:15    [W:0.129 / U:2.336 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site