lkml.org 
[lkml]   [2017]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 4/7] bus: ti-sysc: Add minimal TI sysc interconnect target driver
* Tony Lindgren <tony@atomide.com> [170929 15:35]:
> +static struct platform_driver sysc_driver = {
> + .probe = sysc_probe,
> + .driver = {
> + .name = "ti-sysc",
> + .of_match_table = sysc_match,
> + .pm = &sysc_pm_ops,
> + },
> +};
> +module_platform_driver(sysc_driver);

We also need add remove() to have unbind and bind work
properly, here's an incremental patch to add that.

Regards,

Tony

8< -------------------------
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 13 Oct 2017 10:48:40 -0700
Subject: [PATCH] bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding
remove

Looks like we're missing remove() that's needed if a driver instance
rebound. Otherwise we will get "Unbalanced pm_runtime_enable!".

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/bus/ti-sysc.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -529,6 +529,30 @@ static int sysc_probe(struct platform_device *pdev)
return error;
}

+static int sysc_remove(struct platform_device *pdev)
+{
+ struct sysc *ddata = platform_get_drvdata(pdev);
+ int error;
+
+ error = pm_runtime_get_sync(ddata->dev);
+ if (error < 0) {
+ pm_runtime_put_noidle(ddata->dev);
+ pm_runtime_disable(ddata->dev);
+ goto unprepare;
+ }
+
+ of_platform_depopulate(&pdev->dev);
+
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+unprepare:
+ sysc_unprepare(ddata);
+
+ return 0;
+}
+
static const struct of_device_id sysc_match[] = {
{ .compatible = "ti,sysc-omap2" },
{ .compatible = "ti,sysc-omap4" },
@@ -546,6 +570,7 @@ MODULE_DEVICE_TABLE(of, sysc_match);

static struct platform_driver sysc_driver = {
.probe = sysc_probe,
+ .remove = sysc_remove,
.driver = {
.name = "ti-sysc",
.of_match_table = sysc_match,
--
2.14.2
\
 
 \ /
  Last update: 2017-10-13 19:52    [W:2.086 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site