lkml.org 
[lkml]   [2017]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [lkp-robot] [x86/kconfig] 81d3871900: BUG:unable_to_handle_kernel
From
Date
On 10/13/2017 07:45 AM, Josh Poimboeuf wrote:
> On Thu, Oct 12, 2017 at 12:05:04PM -0500, Christopher Lameter wrote:
>> On Wed, 11 Oct 2017, Josh Poimboeuf wrote:
>>
>>> I failed to add the slab maintainers to CC on the last attempt. Trying
>>> again.
>>
>>
>> Hmmm... Yea. SLOB is rarely used and tested. Good illustration of a simple
>> allocator and the K&R mechanism that was used in the early kernels.
>>
>>>> Adding the slub maintainers. Is slob still supposed to work?
>>
>> Have not seen anyone using it in a decade or so.
>>
>> Does the same config with SLUB and slub_debug on the commandline run
>> cleanly?
>>
>>>> I have no idea how that crypto panic could could be related to slob, but
>>>> at least it goes away when I switch to slub.
>>
>> Can you run SLUB with full debug? specify slub_debug on the commandline or
>> set CONFIG_SLUB_DEBUG_ON
>
> Oddly enough, with CONFIG_SLUB+slub_debug, I get the same crypto panic I
> got with CONFIG_SLOB. The trapping instruction is:
>
> vmovdqa 0x140(%rdi),%xmm0


It's unaligned access. Look at %rdi. vmovdqa requires 16-byte alignment.
Apparently, something fed kmalloc()'ed data here. But kmalloc() guarantees only sizeof(unsigned long)
alignment. slub_debug changes slub's objects layout, so what happened to be 16-bytes aligned
without slub_debug, may become 8-byte aligned with slub_debg on.


> I'll try to bisect it tomorrow. It at least goes back to v4.10.

Probably no point. I bet this bug always was here (since this code added).

This could be fixed by s/vmovdqa/vmovdqu change like bellow, but maybe the right fix
would be to align the data properly?

---
arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S
index 8fe6338bcc84..7fd5d9b568c7 100644
--- a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S
+++ b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S
@@ -155,8 +155,8 @@ LABEL skip_ %I
.endr

# Find min length
- vmovdqa _lens+0*16(state), %xmm0
- vmovdqa _lens+1*16(state), %xmm1
+ vmovdqu _lens+0*16(state), %xmm0
+ vmovdqu _lens+1*16(state), %xmm1

vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A}
vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C}
@@ -176,8 +176,8 @@ LABEL skip_ %I
vpsubd %xmm2, %xmm0, %xmm0
vpsubd %xmm2, %xmm1, %xmm1

- vmovdqa %xmm0, _lens+0*16(state)
- vmovdqa %xmm1, _lens+1*16(state)
+ vmovdqu %xmm0, _lens+0*16(state)
+ vmovdqu %xmm1, _lens+1*16(state)

# "state" and "args" are the same address, arg1
# len is arg2
--
2.13.6


> I'm
> not really sure whether this panic is related to SLUB or SLOB at all.
> (Though the original panic reported upthread by the kernel test robot
> *does* look SLOB related.)
>
> general protection fault: 0000 [#1] PREEMPT SMP
> Modules linked in:
> CPU: 0 PID: 58 Comm: kworker/0:1 Not tainted 4.13.0 #81
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
> Workqueue: crypto mcryptd_flusher
> task: ffff880139108040 task.stack: ffffc9000082c000
> RIP: 0010:skip_7+0x0/0x67
> RSP: 0018:ffffc9000082fd88 EFLAGS: 00010246
> RAX: ffff88013834172c RBX: 00000000f7654321 RCX: 0000000000000003
> RDX: 0000000000000000 RSI: ffffffff81d254f9 RDI: ffff8801381b1a88
> RBP: ffffc9000082fd90 R08: 0000000000000000 R09: 0000000000000001
> R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff82392260
> R13: ffff88013a7e6500 R14: 00000000fffb80f5 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffff88013a600000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f88491ef914 CR3: 0000000001e11000 CR4: 00000000001406f0
> Call Trace:
> sha256_ctx_mgr_flush+0x28/0x30
> sha256_mb_flusher+0x53/0x120
> mcryptd_flusher+0xc4/0xf0
> process_one_work+0x253/0x6b0
> worker_thread+0x4d/0x3b0
> ? preempt_count_sub+0x9b/0x100
> kthread+0x133/0x150
> ? process_one_work+0x6b0/0x6b0
> ? kthread_create_on_node+0x70/0x70
> ret_from_fork+0x2a/0x40
> Code: 89 87 30 01 00 00 c7 87 58 01 00 00 ff ff ff ff 48 83 bf a0 01 00 00 00 75 11 48 89 87 38 01 00 00 c7 87 5c 01 00 00 ff ff ff ff <c5> f9 6f 87 40 01 00 00 c5 f9 6f 8f 50 01 00 00 c4 e2 79 3b d1
> RIP: skip_7+0x0/0x67 RSP: ffffc9000082fd88
> ---[ end trace d89a1613b7d1b8bc ]---
> BUG: sleeping function called from invalid context at ./include/linux/percpu-rwsem.h:33
> in_atomic(): 1, irqs_disabled(): 0, pid: 58, name: kworker/0:1
> INFO: lockdep is turned off.
> Preemption disabled at:
> [<ffffffff81041933>] kernel_fpu_begin+0x13/0x20
> CPU: 0 PID: 58 Comm: kworker/0:1 Tainted: G D 4.13.0 #81
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
> Workqueue: crypto mcryptd_flusher
> Call Trace:
> dump_stack+0x8e/0xcd
> ___might_sleep+0x185/0x260
> __might_sleep+0x4a/0x80
> exit_signals+0x33/0x2d0
> do_exit+0xb4/0xd80
> ? kthread+0x133/0x150
> rewind_stack_do_exit+0x17/0x20
> note: kworker/0:1[58] exited with preempt_count 1
> tsc: Refined TSC clocksource calibration: 2793.538 MHz
> clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28446877189, max_idle_ns: 440795280878 ns
>

\
 
 \ /
  Last update: 2017-10-13 15:54    [W:0.098 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site