lkml.org 
[lkml]   [2017]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V11 0/4] mmc: Add Command Queue support
Date
Hi

Here is V11 of the hardware command queue patches without the software
command queue patches, now using blk-mq and now with blk-mq support for
non-CQE I/O.

HW CMDQ offers 25% - 50% better random multi-threaded I/O. I see a slight
2% drop in sequential read speed but no change to sequential write.

Non-CQE blk-mq showed a 3% decrease in sequential read performance. This
seemed to be coming from the inferior latency of running work items compared
with a dedicated thread. Hacking blk-mq workqueue to be unbound reduced the
performance degradation from 3% to 1%.

While we should look at changing blk-mq to give better workqueue performance,
a bigger gain is likely to be made by adding a new host API to enable the
next already-prepared request to be issued directly from within ->done()
callback of the current request.


Changes since V10:
mmc: core: Remove unnecessary host claim
mmc: core: Introduce host claiming by context
mmc: core: Add support for handling CQE requests
mmc: mmc: Enable Command Queuing
mmc: mmc: Enable CQE's
mmc: block: Use local variables in mmc_blk_data_prep()
mmc: block: Prepare CQE data
mmc: block: Factor out mmc_setup_queue()
mmc: core: Add parameter use_blk_mq
mmc: core: Export mmc_start_bkops()
mmc: core: Export mmc_start_request()
mmc: core: Export mmc_retune_hold_now() and mmc_retune_release()
Dropped because they have been applied
mmc: block: Add CQE and blk-mq support
Extend blk-mq support for asynchronous read / writes to all host
controllers including those that require polling. The direct
completion path is still available but depends on a new capability
flag.
Drop blk-mq support for synchronous read / writes.

Venkat Gopalakrishnan (1):
mmc: cqhci: support for command queue enabled host

Changes since V9:
mmc: block: Add CQE and blk-mq support
- reinstate mq support for REQ_OP_DRV_IN/OUT that was removed because
it was incorrectly assumed to be handled by the rpmb character device
- don't check for rpmb block device anymore
mmc: cqhci: support for command queue enabled host
Fix cqhci_set_irqs() as per Haibo Chen

Changes since V8:
Re-based
mmc: core: Introduce host claiming by context
Slightly simplified as per Ulf
mmc: core: Export mmc_retune_hold_now() and mmc_retune_release()
New patch.
mmc: block: Add CQE and blk-mq support
Fix missing ->post_req() on the error path

Changes since V7:
Re-based
mmc: core: Introduce host claiming by context
Slightly simplified
mmc: core: Add parameter use_blk_mq
New patch.
mmc: core: Remove unnecessary host claim
New patch.
mmc: core: Export mmc_start_bkops()
New patch.
mmc: core: Export mmc_start_request()
New patch.
mmc: block: Add CQE and blk-mq support
Add blk-mq support for non_CQE requests

Changes since V6:
mmc: core: Introduce host claiming by context
New patch.
mmc: core: Move mmc_start_areq() declaration
Dropped because it has been applied
mmc: block: Fix block status codes
Dropped because it has been applied
mmc: host: Add CQE interface
Dropped because it has been applied
mmc: core: Turn off CQE before sending commands
Dropped because it has been applied
mmc: block: Factor out mmc_setup_queue()
New patch.
mmc: block: Add CQE support
Drop legacy support and add blk-mq support

Changes since V5:
Re-based
mmc: core: Add mmc_retune_hold_now()
Dropped because it has been applied
mmc: core: Add members to mmc_request and mmc_data for CQE's
Dropped because it has been applied
mmc: core: Move mmc_start_areq() declaration
New patch at Ulf's request
mmc: block: Fix block status codes
Another un-related patch
mmc: host: Add CQE interface
Move recovery_notifier() callback to struct mmc_request
mmc: core: Add support for handling CQE requests
Roll __mmc_cqe_request_done() into mmc_cqe_request_done()
Move function declarations requested by Ulf
mmc: core: Remove unused MMC_CAP2_PACKED_CMD
Dropped because it has been applied
mmc: block: Add CQE support
Add explanation to commit message
Adjustment for changed recovery_notifier() callback
mmc: cqhci: support for command queue enabled host
Adjustment for changed recovery_notifier() callback
mmc: sdhci-pci: Add CQHCI support for Intel GLK
Add DCMD capability for Intel controllers except GLK

Changes since V4:
mmc: core: Add mmc_retune_hold_now()
Add explanation to commit message.
mmc: host: Add CQE interface
Add comments to callback declarations.
mmc: core: Turn off CQE before sending commands
Add explanation to commit message.
mmc: core: Add support for handling CQE requests
Add comments as requested by Ulf.
mmc: core: Remove unused MMC_CAP2_PACKED_CMD
New patch.
mmc: mmc: Enable Command Queuing
Adjust for removal of MMC_CAP2_PACKED_CMD.
Add a comment about Packed Commands.
mmc: mmc: Enable CQE's
Remove un-necessary check for MMC_CAP2_CQE
mmc: block: Use local variables in mmc_blk_data_prep()
New patch.
mmc: block: Prepare CQE data
Adjust due to "mmc: block: Use local variables in mmc_blk_data_prep()"
Remove priority setting.
Add explanation to commit message.
mmc: cqhci: support for command queue enabled host
Fix transfer descriptor setting in cqhci_set_tran_desc() for 32-bit DMA

Changes since V3:
Adjusted ...blk_end_request...() for new block status codes
Fixed CQHCI transaction descriptor for "no DCMD" case

Changes since V2:
Dropped patches that have been applied.
Re-based
Added "mmc: sdhci-pci: Add CQHCI support for Intel GLK"

Changes since V1:

"Share mmc request array between partitions" is dependent
on changes in "Introduce queue semantics", so added that
and block fixes:

Added "Fix is_waiting_last_req set incorrectly"
Added "Fix cmd error reset failure path"
Added "Use local var for mqrq_cur"
Added "Introduce queue semantics"

Changes since RFC:

Re-based on next.
Added comment about command queue priority.
Added some acks and reviews.


Adrian Hunter (3):
mmc: core: Add parameter use_blk_mq
mmc: block: Add CQE and blk-mq support
mmc: sdhci-pci: Add CQHCI support for Intel GLK

Venkat Gopalakrishnan (1):
mmc: cqhci: support for command queue enabled host

drivers/mmc/Kconfig | 11 +
drivers/mmc/core/block.c | 801 +++++++++++++++++++++++++-
drivers/mmc/core/block.h | 12 +
drivers/mmc/core/core.c | 7 +
drivers/mmc/core/core.h | 2 +
drivers/mmc/core/host.c | 2 +
drivers/mmc/core/host.h | 4 +
drivers/mmc/core/queue.c | 426 +++++++++++++-
drivers/mmc/core/queue.h | 61 ++
drivers/mmc/host/Kconfig | 14 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/cqhci.c | 1150 +++++++++++++++++++++++++++++++++++++
drivers/mmc/host/cqhci.h | 240 ++++++++
drivers/mmc/host/sdhci-pci-core.c | 155 ++++-
include/linux/mmc/host.h | 2 +
15 files changed, 2857 insertions(+), 31 deletions(-)
create mode 100644 drivers/mmc/host/cqhci.c
create mode 100644 drivers/mmc/host/cqhci.h


Regards
Adrian

\
 
 \ /
  Last update: 2017-10-13 13:19    [W:0.061 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site