lkml.org 
[lkml]   [2017]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 2/2] KVM: add virtio-pmem driver

> > This patch adds virtio-pmem driver for KVM guest.
> > Guest reads the persistent memory range information
> > over virtio bus from Qemu and reserves the range
> > as persistent memory. Guest also allocates a block
> > device corresponding to the pmem range which later
> > can be accessed with DAX compatible file systems.
> > Idea is to use the virtio channel between guest and
> > host to perform the block device flush for guest pmem
> > DAX device.
> >
> > There is work to do including DAX file system support
> > and other advanced features.
> >
> > Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
> > ---
> > drivers/virtio/Kconfig | 10 ++
> > drivers/virtio/Makefile | 1 +
> > drivers/virtio/virtio_pmem.c | 322
> > +++++++++++++++++++++++++++++++++++++++
> > include/uapi/linux/virtio_pmem.h | 55 +++++++
> > 4 files changed, 388 insertions(+)
> > create mode 100644 drivers/virtio/virtio_pmem.c
> > create mode 100644 include/uapi/linux/virtio_pmem.h
> >
> > diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> > index cff773f15b7e..0192c4bda54b 100644
> > --- a/drivers/virtio/Kconfig
> > +++ b/drivers/virtio/Kconfig
> > @@ -38,6 +38,16 @@ config VIRTIO_PCI_LEGACY
> >
> > If unsure, say Y.
> >
> > +config VIRTIO_PMEM
> > + tristate "Virtio pmem driver"
> > + depends on VIRTIO
> > + ---help---
> > + This driver adds persistent memory range within a KVM guest.
>
> I think we need to call this something other than persistent memory to
> make it clear that this not memory where the persistence can be
> managed from userspace. The persistence point always requires a driver
> call, so this is something distinctly different than "persistent
> memory". For example, it's a bug if this memory range ends up backing
> a device-dax range in the guest where there is no such thing as a
> driver callback to perform the flushing. How does this solution
> protect against that scenario?

yes, you are right we are not providing device_dax in this case so it should
be clear from name. Any suggestion for name?

>
> > + It also associates a block device corresponding to the pmem
> > + range.
> > +
> > + If unsure, say M.
> > +
> > config VIRTIO_BALLOON
> > tristate "Virtio balloon driver"
> > depends on VIRTIO
> > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > index 41e30e3dc842..032ade725cc2 100644
> > --- a/drivers/virtio/Makefile
> > +++ b/drivers/virtio/Makefile
> > @@ -5,3 +5,4 @@ virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
> > obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
> > obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
> > +obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o
> > diff --git a/drivers/virtio/virtio_pmem.c b/drivers/virtio/virtio_pmem.c
> > new file mode 100644
> > index 000000000000..74e47cae0e24
> > --- /dev/null
> > +++ b/drivers/virtio/virtio_pmem.c
> > @@ -0,0 +1,322 @@
> > +/*
> > + * virtio-pmem driver
> > + */
> > +
> > +#include <linux/virtio.h>
> > +#include <linux/swap.h>
> > +#include <linux/workqueue.h>
> > +#include <linux/delay.h>
> > +#include <linux/slab.h>
> > +#include <linux/module.h>
> > +#include <linux/oom.h>
> > +#include <linux/wait.h>
> > +#include <linux/mm.h>
> > +#include <linux/mount.h>
> > +#include <linux/magic.h>
> > +#include <linux/virtio_pmem.h>
> > +
> > +void devm_vpmem_disable(struct device *dev, struct resource *res, void
> > *addr)
> > +{
> > + devm_memunmap(dev, addr);
> > + devm_release_mem_region(dev, res->start, resource_size(res));
> > +}
> > +
> > +static void pmem_flush_done(struct virtqueue *vq)
> > +{
> > + return;
> > +};
> > +
> > +static void virtio_pmem_release_queue(void *q)
> > +{
> > + blk_cleanup_queue(q);
> > +}
> > +
> > +static void virtio_pmem_freeze_queue(void *q)
> > +{
> > + blk_freeze_queue_start(q);
> > +}
> > +
> > +static void virtio_pmem_release_disk(void *__pmem)
> > +{
> > + struct virtio_pmem *pmem = __pmem;
> > +
> > + del_gendisk(pmem->disk);
> > + put_disk(pmem->disk);
> > +}
>
> This code seems identical to the base pmem case, it should move to the
> shared code object.

Sure!
>
> > +
> > +static int init_vq(struct virtio_pmem *vpmem)
> > +{
> > + struct virtqueue *vq;
> > +
> > + /* single vq */
> > + vq = virtio_find_single_vq(vpmem->vdev, pmem_flush_done,
> > "flush_queue");
> > +
> > + if (IS_ERR(vq))
> > + return PTR_ERR(vq);
> > +
> > + return 0;
> > +}
> > +
> > +static struct vmem_altmap *setup_pmem_pfn(struct virtio_pmem *vpmem,
> > + struct resource *res, struct vmem_altmap *altmap)
> > +{
> > + u32 start_pad = 0, end_trunc = 0;
> > + resource_size_t start, size;
> > + unsigned long npfns;
> > + phys_addr_t offset;
> > +
> > + size = resource_size(res);
> > + start = PHYS_SECTION_ALIGN_DOWN(res->start);
> > +
> > + if (region_intersects(start, size, IORESOURCE_SYSTEM_RAM,
> > + IORES_DESC_NONE) == REGION_MIXED) {
> > +
> > + start = res->start;
> > + start_pad = PHYS_SECTION_ALIGN_UP(start) - start;
> > + }
> > + start = res->start;
> > + size = PHYS_SECTION_ALIGN_UP(start + size) - start;
> > +
> > + if (region_intersects(start, size, IORESOURCE_SYSTEM_RAM,
> > + IORES_DESC_NONE) == REGION_MIXED) {
> > +
> > + size = resource_size(res);
> > + end_trunc = start + size -
> > + PHYS_SECTION_ALIGN_DOWN(start + size);
> > + }
> > +
> > + start += start_pad;
> > + size = resource_size(res);
> > + npfns = PFN_SECTION_ALIGN_UP((size - start_pad - end_trunc - SZ_8K)
> > + / PAGE_SIZE);
> > +
> > + /*
> > + * vmemmap_populate_hugepages() allocates the memmap array in
> > + * HPAGE_SIZE chunks.
> > + */
> > + offset = ALIGN(start + SZ_8K + 64 * npfns, HPAGE_SIZE) - start;
> > + vpmem->data_offset = offset;
> > +
> > + struct vmem_altmap __altmap = {
> > + .base_pfn = init_altmap_base(start+start_pad),
> > + .reserve = init_altmap_reserve(start+start_pad),
> > + };
> > +
> > + res->start += start_pad;
> > + res->end -= end_trunc;
> > + memcpy(altmap, &__altmap, sizeof(*altmap));
> > + altmap->free = PHYS_PFN(offset - SZ_8K);
> > + altmap->alloc = 0;
> > +
> > + return altmap;
> > +}
> > +
> > +static blk_status_t pmem_do_bvec(struct virtio_pmem *pmem, struct page
> > *page,
> > + unsigned int len, unsigned int off, bool is_write,
> > + sector_t sector)
> > +{
> > + blk_status_t rc = BLK_STS_OK;
> > + phys_addr_t pmem_off = sector * 512 + pmem->data_offset;
> > + void *pmem_addr = pmem->virt_addr + pmem_off;
> > +
> > + if (!is_write) {
> > + rc = read_pmem(page, off, pmem_addr, len);
> > + flush_dcache_page(page);
> > + } else {
> > + flush_dcache_page(page);
> > + write_pmem(pmem_addr, page, off, len);
> > + }
> > +
> > + return rc;
> > +}
> > +
> > +static int vpmem_rw_page(struct block_device *bdev, sector_t sector,
> > + struct page *page, bool is_write)
> > +{
> > + struct virtio_pmem *pmem = bdev->bd_queue->queuedata;
> > + blk_status_t rc;
> > +
> > + rc = pmem_do_bvec(pmem, page, hpage_nr_pages(page) * PAGE_SIZE,
> > + 0, is_write, sector);
> > +
> > + if (rc == 0)
> > + page_endio(page, is_write, 0);
> > +
> > + return blk_status_to_errno(rc);
> > +}
> > +
> > +#ifndef REQ_FLUSH
> > +#define REQ_FLUSH REQ_PREFLUSH
> > +#endif
> > +
> > +static blk_qc_t virtio_pmem_make_request(struct request_queue *q,
> > + struct bio *bio)
> > +{
> > + blk_status_t rc = 0;
> > + struct bio_vec bvec;
> > + struct bvec_iter iter;
> > + struct virtio_pmem *pmem = q->queuedata;
> > +
> > + if (bio->bi_opf & REQ_FLUSH)
> > + //todo host flush command
> > +
> > + bio_for_each_segment(bvec, bio, iter) {
> > + rc = pmem_do_bvec(pmem, bvec.bv_page, bvec.bv_len,
> > + bvec.bv_offset, op_is_write(bio_op(bio)),
> > + iter.bi_sector);
> > + if (rc) {
> > + bio->bi_status = rc;
> > + break;
> > + }
> > + }
> > +
> > + bio_endio(bio);
> > + return BLK_QC_T_NONE;
> > +}
>
> Again, the above could be shared by both drivers.

yes, I will do that.
>
> > +
> > +static const struct block_device_operations pmem_fops = {
> > + .owner = THIS_MODULE,
> > + .rw_page = vpmem_rw_page,
> > + //.revalidate_disk = nvdimm_revalidate_disk,
> > +};
> > +
> > +static int virtio_pmem_probe(struct virtio_device *vdev)
> > +{
> > + struct virtio_pmem *vpmem;
> > + int err = 0;
> > + void *addr;
> > + struct resource *res, res_pfn;
> > + struct request_queue *q;
> > + struct vmem_altmap __altmap, *altmap = NULL;
> > + struct gendisk *disk;
> > + struct device *gendev;
> > + int nid = dev_to_node(&vdev->dev);
> > +
> > + if (!vdev->config->get) {
> > + dev_err(&vdev->dev, "%s failure: config disabled\n",
> > + __func__);
> > + return -EINVAL;
> > + }
> > +
> > + vdev->priv = vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem),
> > + GFP_KERNEL);
> > +
> > + if (!vpmem) {
> > + err = -ENOMEM;
> > + goto out;
> > + }
> > +
> > + dev_set_drvdata(&vdev->dev, vpmem);
> > +
> > + vpmem->vdev = vdev;
> > + err = init_vq(vpmem);
> > + if (err)
> > + goto out;
> > +
> > + if (!virtio_has_feature(vdev, VIRTIO_PMEM_PLUG)) {
> > + dev_err(&vdev->dev, "%s : pmem not supported\n",
> > + __func__);
> > + goto out;
> > + }
> > +
> > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > + start, &vpmem->start);
> > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > + size, &vpmem->size);
> > +
> > + res_pfn.start = vpmem->start;
> > + res_pfn.end = vpmem->start + vpmem->size-1;
> > +
> > + /* used for allocating memmap in the pmem device */
> > + altmap = setup_pmem_pfn(vpmem, &res_pfn, &__altmap);
> > +
> > + res = devm_request_mem_region(&vdev->dev,
> > + res_pfn.start, resource_size(&res_pfn),
> > "virtio-pmem");
> > +
> > + if (!res) {
> > + dev_warn(&vdev->dev, "could not reserve region ");
> > + return -EBUSY;
> > + }
> > +
> > + q = blk_alloc_queue_node(GFP_KERNEL, dev_to_node(&vdev->dev));
> > +
> > + if (!q)
> > + return -ENOMEM;
> > +
> > + if (devm_add_action_or_reset(&vdev->dev,
> > + virtio_pmem_release_queue, q))
> > + return -ENOMEM;
> > +
> > + vpmem->pfn_flags = PFN_DEV;
> > +
> > + /* allocate memap in pmem device itself */
> > + if (IS_ENABLED(CONFIG_ZONE_DEVICE)) {
> > +
> > + addr = devm_memremap_pages(&vdev->dev, res,
> > + &q->q_usage_counter, altmap);
> > + vpmem->pfn_flags |= PFN_MAP;
> > + } else
> > + addr = devm_memremap(&vdev->dev, vpmem->start,
> > + vpmem->size, ARCH_MEMREMAP_PMEM);
> > +
> > + /*
> > + * At release time the queue must be frozen before
> > + * devm_memremap_pages is unwound
> > + */
> > + if (devm_add_action_or_reset(&vdev->dev,
> > + virtio_pmem_freeze_queue, q))
> > + return -ENOMEM;
> > +
> > + if (IS_ERR(addr))
> > + return PTR_ERR(addr);
> > +
> > + vpmem->virt_addr = addr;
> > + blk_queue_write_cache(q, 0, 0);
> > + blk_queue_make_request(q, virtio_pmem_make_request);
> > + blk_queue_physical_block_size(q, PAGE_SIZE);
> > + blk_queue_logical_block_size(q, 512);
> > + blk_queue_max_hw_sectors(q, UINT_MAX);
> > + queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
> > + queue_flag_set_unlocked(QUEUE_FLAG_DAX, q);
> > + q->queuedata = vpmem;
> > +
> > + disk = alloc_disk_node(0, nid);
> > + if (!disk)
> > + return -ENOMEM;
> > + vpmem->disk = disk;
> > +
> > + disk->fops = &pmem_fops;
> > + disk->queue = q;
> > + disk->flags = GENHD_FL_EXT_DEVT;
> > + strcpy(disk->disk_name, "vpmem");
> > + set_capacity(disk, vpmem->size/512);
> > + gendev = disk_to_dev(disk);
> > +
> > + virtio_device_ready(vdev);
> > + device_add_disk(&vdev->dev, disk);
> > +
> > + if (devm_add_action_or_reset(&vdev->dev,
> > + virtio_pmem_release_disk, vpmem))
> > + return -ENOMEM;
> > +
> > + revalidate_disk(disk);
> > + return 0;
> > +out:
> > + vdev->config->del_vqs(vdev);
> > + return err;
> > +}
>
> Here we have a mix of code that is common and some that is virtio
> specific, the shared code should be factored out into a common helper
> that both drivers call.

yes, i will factor this as well.
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
>

\
 
 \ /
  Last update: 2017-10-12 23:25    [W:8.776 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site