lkml.org 
[lkml]   [2017]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/5] ufs/phy: qcom: Refactor to use phy_init call
Date
Refactor ufs_qcom_power_up_sequence() to get rid of ugly
exported phy APIs and use the phy_init() and phy_power_on()
to do the phy initialization.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---

Changes since v1:
- The UFS phy retain state in low power mode. The phy can
enter the low power state and come up without starting the
serdes again, unless we reprogram the phy.
So, added a check to start the serdes only once after phy
initialization.

drivers/phy/qualcomm/phy-qcom-ufs-i.h | 3 +-
drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 15 ++++++++--
drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 15 ++++++++--
drivers/phy/qualcomm/phy-qcom-ufs.c | 42 ++++++++++------------------
drivers/scsi/ufs/ufs-qcom.c | 36 ++++++++++--------------
include/linux/phy/phy-qcom-ufs.h | 3 --
6 files changed, 55 insertions(+), 59 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
index 94326ed107c3..822c83b8efcd 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
@@ -114,6 +114,7 @@ struct ufs_qcom_phy {
struct ufs_qcom_phy_calibration *cached_regs;
int cached_regs_table_size;
bool is_powered_on;
+ bool is_started;
struct ufs_qcom_phy_specific_ops *phy_spec_ops;

enum phy_mode mode;
@@ -123,7 +124,6 @@ struct ufs_qcom_phy {
* struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
* specific implementation per phy. Each UFS phy, should implement
* those functions according to its spec and requirements
- * @calibrate_phy: pointer to a function that calibrate the phy
* @start_serdes: pointer to a function that starts the serdes
* @is_physical_coding_sublayer_ready: pointer to a function that
* checks pcs readiness. returns 0 for success and non-zero for error.
@@ -132,7 +132,6 @@ struct ufs_qcom_phy {
* and writes to QSERDES_RX_SIGDET_CNTRL attribute
*/
struct ufs_qcom_phy_specific_ops {
- int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
void (*start_serdes)(struct ufs_qcom_phy *phy);
int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
index af65785230b5..ba1895b76a5d 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
@@ -44,7 +44,19 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)

static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
{
- return 0;
+ struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+ bool is_rate_B = false;
+ int ret;
+
+ if (phy_common->mode == PHY_MODE_UFS_HS_B)
+ is_rate_B = true;
+
+ ret = ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B);
+ if (!ret)
+ /* phy calibrated, but yet to be started */
+ phy_common->is_started = false;
+
+ return ret;
}

static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
@@ -120,7 +132,6 @@ static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
};

static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
- .calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate,
.start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes,
.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
.set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
index 5c18c41dbdb4..49f435c71147 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
@@ -63,7 +63,19 @@ void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)

static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
{
- return 0;
+ struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+ bool is_rate_B = false;
+ int ret;
+
+ if (phy_common->mode == PHY_MODE_UFS_HS_B)
+ is_rate_B = true;
+
+ ret = ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B);
+ if (!ret)
+ /* phy calibrated, but yet to be started */
+ phy_common->is_started = false;
+
+ return ret;
}

static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
@@ -178,7 +190,6 @@ static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
};

static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
- .calibrate_phy = ufs_qcom_phy_qmp_20nm_phy_calibrate,
.start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
.set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c
index 43865ef340e2..c5ff4525edef 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs.c
@@ -518,9 +518,8 @@ void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy)
}
}

-int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
+static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy *ufs_qcom_phy)
{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
int ret = 0;

if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
@@ -533,7 +532,6 @@ int ufs_qcom_phy_start_serdes(struct phy *generic_phy)

return ret;
}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);

int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
{
@@ -564,31 +562,8 @@ void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
}
EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);

-int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
-{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
- int ret = 0;
-
- if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
- dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n",
- __func__);
- ret = -ENOTSUPP;
- } else {
- ret = ufs_qcom_phy->phy_spec_ops->
- calibrate_phy(ufs_qcom_phy, is_rate_B);
- if (ret)
- dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n",
- __func__, ret);
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
-
-int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
+static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy *ufs_qcom_phy)
{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
-
if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n",
__func__);
@@ -598,7 +573,6 @@ int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
return ufs_qcom_phy->phy_spec_ops->
is_physical_coding_sublayer_ready(ufs_qcom_phy);
}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);

int ufs_qcom_phy_power_on(struct phy *generic_phy)
{
@@ -609,6 +583,18 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
if (phy_common->is_powered_on)
return 0;

+ if (!phy_common->is_started) {
+ err = ufs_qcom_phy_start_serdes(phy_common);
+ if (err)
+ return err;
+
+ err = ufs_qcom_phy_is_pcs_ready(phy_common);
+ if (err)
+ return err;
+
+ phy_common->is_started = true;
+ }
+
err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
if (err) {
dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 942e40c9eaf7..2b38db2eeafa 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -281,10 +281,10 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
/* provide 1ms delay to let the reset pulse propagate */
usleep_range(1000, 1100);

- ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
-
+ /* phy initialization - calibrate the phy */
+ ret = phy_init(phy);
if (ret) {
- dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n",
+ dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
__func__, ret);
goto out;
}
@@ -297,21 +297,22 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
* voltage, current to settle down before starting serdes.
*/
usleep_range(1000, 1100);
- ret = ufs_qcom_phy_start_serdes(phy);
+
+ /* power on phy - start serdes and phy's power and clocks */
+ ret = phy_power_on(phy);
if (ret) {
- dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret = %d\n",
+ dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
__func__, ret);
- goto out;
+ goto out_disable_phy;
}

- ret = ufs_qcom_phy_is_pcs_ready(phy);
- if (ret)
- dev_err(hba->dev,
- "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
- __func__, ret);
-
ufs_qcom_select_unipro_mode(host);

+ return 0;
+
+out_disable_phy:
+ ufs_qcom_assert_reset(hba);
+ phy_exit(phy);
out:
return ret;
}
@@ -1276,14 +1277,9 @@ static int ufs_qcom_init(struct ufs_hba *hba)
ufs_qcom_phy_save_controller_version(host->generic_phy,
host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);

- phy_init(host->generic_phy);
- err = phy_power_on(host->generic_phy);
- if (err)
- goto out_unregister_bus;
-
err = ufs_qcom_init_lane_clks(host);
if (err)
- goto out_disable_phy;
+ goto out_variant_clear;

ufs_qcom_set_caps(hba);
ufs_qcom_advertise_quirks(hba);
@@ -1304,10 +1300,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)

goto out;

-out_disable_phy:
- phy_power_off(host->generic_phy);
-out_unregister_bus:
- phy_exit(host->generic_phy);
out_variant_clear:
ufshcd_set_variant(hba, NULL);
out:
diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h
index 35c070ea6ea3..0a2c18a9771d 100644
--- a/include/linux/phy/phy-qcom-ufs.h
+++ b/include/linux/phy/phy-qcom-ufs.h
@@ -31,10 +31,7 @@
*/
void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);

-int ufs_qcom_phy_start_serdes(struct phy *phy);
int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
-int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B);
-int ufs_qcom_phy_is_pcs_ready(struct phy *phy);
void ufs_qcom_phy_save_controller_version(struct phy *phy,
u8 major, u16 minor, u16 step);

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2017-10-12 08:21    [W:0.090 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site